[OpenWrt-Devel] [PATCH v2 5/7] ath79: set checksum when patching MAC address on ath10k

[Adrian Schmutzler]

Several devices use ath10kcal_patch_mac, although all ath10k
eeproms have a checksum field and should use
ath10kcal_patch_mac_crc.
This might be because the field is not evaluated by the firmware at
the moment.

Nevertheless, this patch will use ath10kcal_patch_mac_crc for all
devices so the correct checksum is in place.

Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>

---

v2: New patch
---
 .../etc/hotplug.d/firmware/11-ath10k-caldata  | 30 +++++++++----------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 3175d5a1f8..802ef4039e 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -26,33 +26,33 @@ case "$FIRMWARE" in
 		;;
 	dlink,dir-859-a1)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
+		ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata "wlan5mac")
 		;;
 	elecom,wrc-1750ghbk2-i)
 		caldata_extract "art" 0x5000 0x844
 		;;
 	engenius,ecb1750)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
+		ath10kcal_patch_mac_crc $(mtd_get_mac_ascii u-boot-env athaddr)
 		;;
 	engenius,epg5000|\
 	iodata,wn-ac1167dgr|\
 	iodata,wn-ac1600dgr2)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
 		;;
 	engenius,ews511ap)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
+		ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
 		;;
 	glinet,gl-ar750|\
 	glinet,gl-ar750s)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
+		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
 		;;
 	glinet,gl-x750)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
+		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
 		;;
 	nec,wg800hp)
 		caldata_extract "art" 0x5000 0x844
@@ -61,11 +61,11 @@ case "$FIRMWARE" in
 	ocedo,koala|\
 	ocedo,ursus)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(mtd_get_mac_binary art 0xc)
+		ath10kcal_patch_mac_crc $(mtd_get_mac_binary art 0xc)
 		;;
 	openmesh,om5p-ac-v2)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
+		ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
 		;;
 	qihoo,c301)
 		caldata_extract "radiocfg" 0x5000 0x844
@@ -77,29 +77,29 @@ case "$FIRMWARE" in
 	tplink,archer-c7-v5|\
 	tplink,archer-c25-v1)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
+		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
 		;;
 	tplink,archer-c5-v1|\
 	tplink,archer-c7-v2)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
+		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
 		;;
 	tplink,archer-d50-v1)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
+		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
 		;;
 	tplink,re350k-v1)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2)
+		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2)
 		;;
 	tplink,re355-v1|\
 	tplink,re450-v1)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
+		ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 		;;
 	tplink,re450-v2)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
+		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
 		;;
 	ubnt,unifiac-lite|\
 	ubnt,unifiac-mesh|\
@@ -127,7 +127,7 @@ case "$FIRMWARE" in
 	netgear,ex6400|\
 	netgear,ex7300)
 		caldata_extract "caldata" 0x5000 0x2f20
-		ath10kcal_patch_mac $(mtd_get_mac_binary caldata 0xc)
+		ath10kcal_patch_mac_crc $(mtd_get_mac_binary caldata 0xc)
 		;;
 	phicomm,k2t)
 		caldata_extract "art" 0x5000 0x2f20
-- 
2.20.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel