[OpenWrt-Devel] QCA9994 outdoor 13km link

[Vincent Wiemann]

Hi Klevis,

have you tried it with a short distance?
If you did you should better ask Ben Greear directly.

By the way ath10k gen 2 chipsets don't work very well with long distance links without a
special feature which implementation is only available to companies like Ubiquiti and very few
people who have an own reverse-engineered implementation.
It works on IPQ401X, QCA9886 and QCA9888 based chips only.

And it is not possible to set a coverage class for gen 2 devices, yet as far as I know due to missing
documentation and implementation (correct me if that information is outdated).
Furthermore a high channel width often results in problems
due to lower receiver sensibility.
We have better experiences with lower channel widths and sometimes get more throughput with that.

Actually I think this does not explain your connection issues as 13 km is not that much.

Regards,

Vincent Wiemann

On 20.09.19 18:30, support at maxnet.al wrote:
> Hello everyone,
> 
> I am trying to setup a custom made outdoor link with Apu2d2 board devices and QCA9994 cards from compex. After i installed openwrt and ath10k ct driver, kmod ath10k and board-2.bin the device can run a 80MHz channel in WDS AP. The problem is that it won't run as station or station wds. It can scan
> the SSIDs but won't connect them. 
> 
> Any suggestion?
> 
> Thank you!
> Klevis
> 

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel