[OpenWrt-Devel] [PATCH V2] ath79: add support for TP-Link TL-MR6400
Enrico Mioso
mrkiko.rs at gmail.com
Tue Sep 17 15:30:29 EDT 2019
This device is an LTE router supported in ar71xx.
As per original commit, hardware specifications (v1.0 EU):
- SoC: QCA9531
- Flash: Winbond W25Q64FV (8MiB)
- RAM: EtronTech EM6AB160TSE-5G (64MiB)
- Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna)
- Ethernet: 2NIC (3x100M + 1x100M)
- WWAN: TP-LINK LTE MODULE (2x external detachable antenna)
- Power: DC 12V 1A
Flashing instructions:
You can flash via tftp recovery (serve factory image as /mr6400_tp_recovery.bin
on 192.168.0.66/24, connect to any ethernet port and power on device while
holding the reset button). Flashing via OEM web interface does not work.
Working:
- Wi-Fi
- TP-Link LTE module does it's thing (but see Notes)
- reset/rfkill keys
Untested:
- recovery via factory
- leds
(I promise I'll test untested items as well in final version.)
Issues:
switch configuration currently broken (port 2 on device is seen as port 3, port 3 as port 2).
Note: as it happened occasionally in ar71xx, during bursty flash activity, LTE module init will fail, with USB enumeration errors.
V1->V2:
- addressed most comments, except for SUPPORTED_DEVICES
Signed-off-by: Enrico Mioso <mrkiko.rs at gmail.com>
CC: Filip Moc <lede at moc6.cz>
CC: Piotr Dymacz <pepe2k at gmail.com>
---
{
This version is not meant to be definite nor merged. I'll be laving tomorrow, and will be back sunday, so I wanted to post this version so in case you have visibility over last changes.
Thanks!
Enrico
}
.../ath79/base-files/etc/board.d/01_leds | 5 +
.../ath79/base-files/etc/board.d/02_network | 5 +
.../ath79/dts/qca9531_tplink_tl-mr6400-v1.dts | 172 ++++++++++++++++++
target/linux/ath79/image/generic-tp-link.mk | 10 +
4 files changed, 192 insertions(+)
create mode 100644 target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index 778316e450..385ac8d9ca 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -130,6 +130,11 @@ tplink,archer-c7-v5)
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x20"
;;
+tplink,tl-mr6400-v1)
+ ucidef_set_led_netdev "lan" "LAN" "tp-link:white:lan" "eth0"
+ ucidef_set_led_netdev "wan" "WAN" "tp-link:white:wan" "eth1"
+ ucidef_set_led_netdev "4g" "4G" "tp-link:white:4g" "usb0"
+ ;;
tplink,archer-c2-v3|\
tplink,tl-wr1043nd-v4|\
tplink,tl-wr1043n-v5)
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 5b47af8ef7..2b0e1ce400 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -56,6 +56,11 @@ ath79_setup_interfaces()
winchannel,wb2000)
ucidef_set_interface_lan "eth0"
;;
+ tplink,tl-mr6400-v1)
+ ucidef_set_interfaces_lan_wan "eth0.1 eth1" "usb0"
+ ucidef_add_switch "switch0" \
+ "0 at eth0" "1:lan" "2:lan" "3:lan"
+ ;;
avm,fritz4020|\
pcs,cr3000|\
tplink,archer-c58-v1|\
diff --git a/target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts b/target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts
new file mode 100644
index 0000000000..a2c006f05e
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca953x.dtsi"
+
+/ {
+ compatible = "tplink,tl-mr6400-v1", "qca,qca9531";
+ model = "TP-Link TL-MR6400 v1";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ gpio_leds: leds {
+ compatible = "gpio-leds";
+
+ /* D12 */
+ wan {
+ label = "tp-link:white:wan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* D11 */
+ 4g {
+ label = "tp-link:white:4g";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* D5 */
+ wps {
+ label = "tp-link:white:wps";
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* D3 */
+ wlan {
+ label = "tp-link:white:wlan";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ /* D2 */
+ led_power: power {
+ label = "tp-link:white:power";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* D4 */
+ lan {
+ label = "tp-link:white:lan";
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ /* SW2 */
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ /* SW3 */
+ rfkill {
+ label = "RFKill button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition at 0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition at 20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x7d0000>;
+ };
+
+ art: partition at 7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+ phy-mode = "mii";
+ phy-handle = <&swphy0>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ switch-phy-addr-swap = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port at 1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&gpio {
+ lte_power {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "tp-link:power:LTE";
+ };
+};
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index 5519e9c960..78d7810f29 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -393,6 +393,16 @@ define Device/tplink_tl-wr810n-v1
endef
TARGET_DEVICES += tplink_tl-wr810n-v1
+define Device/tplink_tl-mr6400-v1
+ $(Device/tplink-8mlzma)
+ ATH_SOC := qca9531
+ DEVICE_MODEL := TL-MR6400
+ DEVICE_VARIANT := v1
+ TPLINK_HWID := 0x64000001
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-net kmod-usb-net-rndis kmod-usb-serial kmod-usb-serial-option adb
+endef
+TARGET_DEVICES += tplink_tl-mr6400-v1
+
define Device/tplink_tl-wr810n-v2
$(Device/tplink-8mlzma)
ATH_SOC := qca9533
--
2.23.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list