[OpenWrt-Devel] [PATCH] ath79: fix UniFi AC LED mapping

[David Bauer]

The UniFi AC LED mapping is currently off. The blue/white LED are used
as WiFi indicators, while the vendor firmware does not feature WiFI
LEDs.

Instead, the LEDs are used to indicate the devices status. Align the LED
mapping to match the vendor firmware as good as possible.

Signed-off-by: David Bauer <mail at david-bauer.net>
---
 target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi b/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi
index 3ee43a6d4b..fdd4a01d86 100644
--- a/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi
+++ b/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi
@@ -6,6 +6,13 @@
 #include "qca956x.dtsi"
 
 / {
+	aliases {
+		led-boot = &led_white;
+		led-failsafe = &led_white;
+		led-running = &led_blue;
+		led-upgrade = &led_blue;
+	};
+
 	chosen {
 		bootargs = "console=ttyS0,115200n8";
 	};
@@ -13,16 +20,14 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wifi_ac {
+		led_white: led_white {
 			label = "ubnt:white:dome";
 			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
 		};
 
-		wifi_n {
+		led_blue: led_blue {
 			label = "ubnt:blue:dome";
 			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy1tpt";
 		};
 
 	};
-- 
2.23.0


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel