[OpenWrt-Devel] [PATCH 3/4] mediatek: cosmetic fixes for mt7629-lynx-rfb
Chuanhong Guo
gch981213 at gmail.com
Thu Oct 31 23:28:57 EDT 2019
This patch did the following things:
1. rename device compatible string
2. add earlycon into cmdline
3. add mac address location according to mt7629 eeprom layout
4. rename mtd partitions
Signed-off-by: Chuanhong Guo <gch981213 at gmail.com>
---
.../files-4.19/arch/arm/boot/dts/mt7629-lynx-rfb.dts | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/target/linux/mediatek/files-4.19/arch/arm/boot/dts/mt7629-lynx-rfb.dts b/target/linux/mediatek/files-4.19/arch/arm/boot/dts/mt7629-lynx-rfb.dts
index f3fadd301a..17ce6046da 100644
--- a/target/linux/mediatek/files-4.19/arch/arm/boot/dts/mt7629-lynx-rfb.dts
+++ b/target/linux/mediatek/files-4.19/arch/arm/boot/dts/mt7629-lynx-rfb.dts
@@ -10,7 +10,7 @@
/ {
model = "MediaTek MT7629 reference board";
- compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
+ compatible = "mediatek,mt7629-lynx-rfb", "mediatek,mt7629";
aliases {
serial0 = &uart0;
@@ -18,6 +18,7 @@
chosen {
stdout-path = "serial0:115200n8";
+ bootargs = "earlycon=uart8250,mmio32,0x11002000";
};
gpio-keys {
@@ -75,6 +76,7 @@
gmac0: mac at 0 {
compatible = "mediatek,eth-mac";
reg = <0>;
+ mtd-mac-address = <&factory 0x2a>;
phy-mode = "sgmii";
fixed-link {
speed = <1000>;
@@ -86,6 +88,7 @@
gmac1: mac at 1 {
compatible = "mediatek,eth-mac";
reg = <1>;
+ mtd-mac-address = <&factory 0x24>;
phy-handle = <&phy0>;
};
@@ -153,13 +156,13 @@
};
factory: partition at 70000 {
- label = "Factory";
+ label = "factory";
reg = <0x70000 0x40000>;
read-only;
};
partition at b0000 {
- label = "Kernel";
+ label = "firmware";
reg = <0xb0000 0xb50000>;
};
};
--
2.21.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list