[OpenWrt-Devel] ath79/qca9533rev2: Help needed on missing GPIO on ath9k-phy0
Dmitry Tunin
hanipouspilot at gmail.com
Wed Oct 30 10:57:31 EDT 2019
Is one wireless adapter connected using PCIE? If it is true, you'll
have to set it's node in DTS.
Generally it's not required, but if you need a gpio controller, then
you have to.
ср, 30 окт. 2019 г. в 17:51, Dmitry Tunin <hanipouspilot at gmail.com>:
>
> ср, 30 окт. 2019 г. в 17:31, Adrian Schmutzler <mail at adrianschmutzler.de>:
> >
> > Hi,
> >
> > we are still working on broken WiFi on CPE210v2/v3 (ath79, QCA9533 rev. 2) and have found that on ath79 a GPIO is missing compared to ar71xx (where WIFI is working):
> >
> > GPIO Config on the ar71xx:
> >
> > gpiochip0: GPIOs 0-31, parent: platform/ath79-gpio, ath79-gpio:
> > gpio-11 ( |tp-link:green:lan0 ) out hi
> > gpio-13 ( |tp-link:green:link1 ) out hi
> > gpio-14 ( |tp-link:green:link2 ) out hi
> > gpio-15 ( |tp-link:green:link3 ) out hi
> > gpio-16 ( |tp-link:green:link4 ) out hi
> > gpio-17 ( |Reset button ) in hi
> >
> > gpiochip1: GPIOs 494-511, ath9k-phy0:
> > gpio-495 ( |ath9k-phy0 ) in lo
> >
> >
> > On the ath79:
> >
> > gpio-11 ( |tp-link:green:lan ) out lo
> > gpio-13 ( |tp-link:green:link1 ) out hi
> > gpio-14 ( |tp-link:green:link2 ) out hi
> > gpio-15 ( |tp-link:green:link3 ) out hi
> > gpio-16 ( |tp-link:green:link4 ) out hi
> > gpio-17 ( |Reset button ) in hi
> >
> >
> > Can somebody point out how we can introduce the ath9k gpio? Or may this be already the result of something broken at an earlier step?
>
> Where I can see the DTS? Generally ath9k gpio is added by
> gpio-controller property to the ath9k node. See dir825b1 as an example
> an many others.
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list