[OpenWrt-Devel] [PATCH] Add support for Inventel DV4210
John Crispin
john at phrozen.org
Sun Oct 27 09:05:50 EDT 2019
On 22/09/2019 22:05, Daniel Gonzalez Cabanelas wrote:
> Add support for the Inventel DV4210 router.
>
> This is an Inventel Livebox 1 board. The patch supports the board with a CFE bootloader, and
> a RAM mod (64 MB, tested). The board originally comes with 8 MB flash. Under this conditions
> this old BCM6348 based board still runs quite fine with current snapshots.
>
Hi,
thanks for the patch, the subject line needs to start with "brcm63xx:"
John
> Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu at gmail.com>
> ---
> .../brcm63xx/base-files/etc/board.d/01_leds | 1 +
> .../base-files/etc/board.d/02_network | 2 +-
> target/linux/brcm63xx/base-files/etc/diag.sh | 1 +
> .../linux/brcm63xx/base-files/lib/brcm63xx.sh | 3 +
> target/linux/brcm63xx/dts/dv4210.dts | 102 ++++++++++++++++++
> target/linux/brcm63xx/image/bcm63xx.mk | 13 +++
> .../patches-4.14/599-board_DV4210.patch | 50 +++++++++
> 7 files changed, 171 insertions(+), 1 deletion(-)
> create mode 100644 target/linux/brcm63xx/dts/dv4210.dts
> create mode 100644 target/linux/brcm63xx/patches-4.14/599-board_DV4210.patch
>
> diff --git a/target/linux/brcm63xx/base-files/etc/board.d/01_leds b/target/linux/brcm63xx/base-files/etc/board.d/01_leds
> index d25d37e847..00109ba112 100755
> --- a/target/linux/brcm63xx/base-files/etc/board.d/01_leds
> +++ b/target/linux/brcm63xx/base-files/etc/board.d/01_leds
> @@ -69,6 +69,7 @@ homehub2a)
> ucidef_set_led_usbdev "usb1" "USB1" "HOMEHUB2A:blue:phone" "1-1"
> ucidef_set_led_usbdev "usb2" "USB2" "HOMEHUB2A:green:phone" "2-1"
> ;;
> +dv4210|\
> livebox1)
> ucidef_set_led_netdev "lan" "LAN" "Livebox1:red:traffic" "eth0"
> ucidef_set_led_netdev "wan" "WAN" "Livebox1:red:adsl" "eth1"
> diff --git a/target/linux/brcm63xx/base-files/etc/board.d/02_network b/target/linux/brcm63xx/base-files/etc/board.d/02_network
> index a2ca5a37b3..0e384f82f6 100755
> --- a/target/linux/brcm63xx/base-files/etc/board.d/02_network
> +++ b/target/linux/brcm63xx/base-files/etc/board.d/02_network
> @@ -145,8 +145,8 @@ bcm963268bu_p300)
> ucidef_add_switch "switch0" \
> "0:lan" "3:lan" "4:lan" "5:lan" "6:lan" "7:lan" "8t at eth0"
> ;;
> -
> cpva502p |\
> +dv4210 |\
> livebox1)
> ucidef_set_interfaces_lan_wan "eth0" "eth1"
> ;;
> diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh
> index 34464ec44a..c673a75e40 100644
> --- a/target/linux/brcm63xx/base-files/etc/diag.sh
> +++ b/target/linux/brcm63xx/base-files/etc/diag.sh
> @@ -114,6 +114,7 @@ set_state() {
> hg655b)
> status_led="HW65x:green:power"
> ;;
> + dv4210|\
> livebox1)
> status_led="Livebox1:red:adsl-fail-power"
> ;;
> diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
> index 1676ae0abb..9c0c33cc31 100755
> --- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
> +++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
> @@ -177,6 +177,9 @@ brcm63xx_dt_detect() {
> "Inteno VG50")
> board_name="vg50"
> ;;
> + "Inventel DV4210")
> + board_name="dv4210"
> + ;;
> "Inventel Livebox 1")
> board_name="livebox1"
> ;;
> diff --git a/target/linux/brcm63xx/dts/dv4210.dts b/target/linux/brcm63xx/dts/dv4210.dts
> new file mode 100644
> index 0000000000..02975fe3b6
> --- /dev/null
> +++ b/target/linux/brcm63xx/dts/dv4210.dts
> @@ -0,0 +1,102 @@
> +/dts-v1/;
> +
> +#include "bcm6348.dtsi"
> +
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + model = "Inventel DV4210";
> + compatible = "inventel,dv4210", "brcm,bcm6348";
> +
> + chosen {
> + bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
> + stdout-path = "serial0:115200n8";
> + };
> +
> + keys {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <20>;
> +
> + button1 {
> + label = "1";
> + gpios = <&pinctrl 36 1>;
> + linux,code = <KEY_RESTART>;
> + debounce-interval = <60>;
> + };
> +
> + button2 {
> + label = "2";
> + gpios = <&pinctrl 7 1>;
> + linux,code = <BTN_2>;
> + debounce-interval = <60>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + red_adsl_fail {
> + label = "Livebox1:red:adsl-fail-power";
> + gpios = <&pinctrl 0 0>;
> + default-state = "on";
> + };
> +
> + red_adsl {
> + label = "Livebox1:red:adsl";
> + gpios = <&pinctrl 1 0>;
> + };
> +
> + red_traffic {
> + label = "Livebox1:red:traffic";
> + gpios = <&pinctrl 2 0>;
> + };
> +
> + red_phone {
> + label = "Livebox1:red:phone";
> + gpios = <&pinctrl 3 0>;
> + };
> +
> + red_wifi {
> + label = "Livebox1:red:wifi";
> + gpios = <&pinctrl 4 0>;
> + };
> + };
> +};
> +
> +&pflash {
> + reg = <0x1f400000 0x800000>;
> + status = "ok";
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + cfe at 0 {
> + reg = <0x000000 0x010000>;
> + label = "cfe";
> + };
> +
> + linux at 10000 {
> + reg = <0x010000 0x7e0000>;
> + label = "linux";
> + compatible = "brcm,bcm963xx-imagetag";
> + };
> +
> + nvram at 7f0000 {
> + reg = <0x7f0000 0x010000>;
> + label = "nvram";
> + };
> + };
> +};
> +
> +&pinctrl {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
> +};
> +
> +&uart0 {
> + status = "ok";
> +};
> diff --git a/target/linux/brcm63xx/image/bcm63xx.mk b/target/linux/brcm63xx/image/bcm63xx.mk
> index 212960e972..690ffb49fa 100644
> --- a/target/linux/brcm63xx/image/bcm63xx.mk
> +++ b/target/linux/brcm63xx/image/bcm63xx.mk
> @@ -769,6 +769,19 @@ define Device/livebox
> endef
> TARGET_DEVICES += livebox
>
> +define Device/DV4210
> + $(Device/bcm63xx)
> + DEVICE_TITLE := Inventel DV4210
> + DEVICE_DESCRIPTION = Build firmware images for the Inventel DV4210. Board with CFE bootloader and >32MB RAM
> + DEVICE_DTS := dv4210
> + CFE_BOARD_ID := DV4210
> + CFE_CHIP_ID := 6348
> + DEVICE_PACKAGES := \
> + $(B43_PACKAGES) $(USB1_PACKAGES)
> + DEFAULT := y
> +endef
> +TARGET_DEVICES += DV4210
> +
> ### Netgear ###
> define Device/CVG834G
> $(Device/bcm33xx)
> diff --git a/target/linux/brcm63xx/patches-4.14/599-board_DV4210.patch b/target/linux/brcm63xx/patches-4.14/599-board_DV4210.patch
> new file mode 100644
> index 0000000000..618a214d63
> --- /dev/null
> +++ b/target/linux/brcm63xx/patches-4.14/599-board_DV4210.patch
> @@ -0,0 +1,50 @@
> +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
> ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
> +@@ -1058,6 +1058,31 @@
> + },
> + };
> +
> ++static struct board_info __initdata board_DV4210 = {
> ++ .name = "DV4210",
> ++ .expected_cpu_id = 0x6348,
> ++
> ++ .has_enet0 = 1,
> ++ .has_enet1 = 1,
> ++ .has_pci = 1,
> ++
> ++ .enet0 = {
> ++ .has_phy = 1,
> ++ .use_internal_phy = 1,
> ++ },
> ++
> ++ .enet1 = {
> ++ .has_phy = 1,
> ++ .phy_id = 31,
> ++ },
> ++
> ++ .ephy_reset_gpio = 6,
> ++ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW,
> ++
> ++ .has_ohci0 = 1,
> ++ .has_pccard = 0,
> ++};
> ++
> + static struct board_info __initdata board_96348A_122 = {
> + .name = "96348A-122",
> + .expected_cpu_id = 0x6348,
> +@@ -2746,6 +2771,7 @@
> + &board_FAST2404,
> + &board_FAST2604,
> + &board_DV201AMR,
> ++ &board_DV4210,
> + &board_96348gw_a,
> + &board_rta1025w_16,
> + &board_96348_D4PW,
> +@@ -2859,6 +2885,7 @@
> + { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
> + { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
> + { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
> ++ { .compatible = "inventel,dv4210", .data = &board_DV4210, },
> + { .compatible = "netgear,dg834gtpn", .data = &board_96348gw_10, },
> + { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
> + { .compatible = "sagem,f at st2404", .data = &board_FAST2404, },
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list