[OpenWrt-Devel] [PATCH 2/2] ath79: Prepare NAND subtarget for upstream support of SPI NAND

[Michal Cieslakiewicz]

On Thu, 24 Oct 2019 20:55:01 -0700
Jeff Kletsky <lede at allycomm.com> wrote:

> 
> Cc: Michal Cieslakiewicz <michal.cieslakiewicz at wp.pl>
> 
> [...]
>
> diff --git a/target/linux/ath79/nand/config-default
> b/target/linux/ath79/nand/config-default index c8114a4985..695afdce88
> 100644 --- a/target/linux/ath79/nand/config-default
> +++ b/target/linux/ath79/nand/config-default
> @@ -1,15 +1,26 @@
> -CONFIG_BCH=y
> +CONFIG_BLK_MQ_PCI=y
>  CONFIG_MTD_NAND=y
>  CONFIG_MTD_NAND_AR934X=y
> -CONFIG_MTD_NAND_BCH=y
> +CONFIG_MTD_NAND_CORE=y
>  CONFIG_MTD_NAND_ECC=y
> -CONFIG_MTD_NAND_ECC_BCH=y
> -CONFIG_MTD_SPINAND_MT29F=y
> -CONFIG_MTD_SPINAND_ONDIEECC=y
> +CONFIG_MTD_SPI_NAND=y
>  CONFIG_MTD_UBI=y
> +CONFIG_MTD_UBI_BLOCK=y
> +CONFIG_MTD_UBI_WL_THRESHOLD=4096
>  CONFIG_MTD_UBI_BEB_LIMIT=20
> -# CONFIG_MTD_UBI_BLOCK is not set
>  # CONFIG_MTD_UBI_FASTMAP is not set
>  # CONFIG_MTD_UBI_GLUEBI is not set
> -CONFIG_MTD_UBI_WL_THRESHOLD=4096
> -# CONFIG_UBIFS_FS is not set
> +CONFIG_OF_ADDRESS_PCI=y
> +CONFIG_OF_PCI=y
> +CONFIG_OF_PCI_IRQ=y
> +CONFIG_PCI=y
> +# CONFIG_PCI_AR71XX is not set
> +CONFIG_PCI_AR724X=y
> +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
> +CONFIG_PCI_DOMAINS=y
> +# CONFIG_PHY_AR7100_USB is not set
> +CONFIG_PHY_AR7200_USB=y
> +CONFIG_UBIFS_FS=y
> +CONFIG_UBIFS_FS_ADVANCED_COMPR=y
> +CONFIG_UBIFS_FS_LZO=y
> +CONFIG_UBIFS_FS_ZLIB=y

Hi Jeff,

Kernel config supplied here works OK with my Netgear WNDR4300 ath79/nand
support patch and provides full functionality.
I will drop 'config-default' file from my patchset and rely on your
version.

Tested-by: Michal Cieslakiewicz <michal.cieslakiewicz at wp.pl>

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel