[OpenWrt-Devel] [PATCH 3/5] ath79: add support for ZyXEL NBG6716
André Valentin
avalentin at marcant.net
Mon Oct 21 08:32:12 EDT 2019
Attention: Kernel partition size has been enlarged to 4MB.
To switch, you must update to latest ar71xx-nand snapshort and flash the
image:
mtd -r write openwrt-ath79-nand-zyxel_nbg6716-squashfs-sysupgrade-4M-Kernel.bin firmware
You will end up with a fresh config if you do not inject config into the image.
Access the real u-boot shell:
ZyXEL uses a proprietary loader/shell on top of u-boot: "ZyXEL zloader v2.02"
When the device is starting up, the user can enter the the loader shell
by simply pressing a key within the 3 seconds once the following string
appears on the serial console:
| Hit any key to stop autoboot: 3
The user is then dropped to a locked shell.
|NBG6716> HELP
|ATEN x[,y] set BootExtension Debug Flag (y=password)
|ATSE x show the seed of password generator
|ATSH dump manufacturer related data in ROM
|ATRT [x,y,z,u] RAM read/write test (x=level, y=start addr, z=end addr, u=iterations)
|ATGO boot up whole system
|ATUR x upgrade RAS image (filename)
|NBG6716>
In order to escape/unlock a password challenge has to be passed.
Note: the value is dynamic! you have to calculate your own!
First use ATSE $MODELNAME (MODELNAME is the hostname in u-boot env)
to get the challange value/seed.
|NBG6716> ATSE NBG6716
|012345678901
This seed/value can be converted to the password with the help of this
bash script (Thanks to http://www.adslayuda.com/Zyxel650-9.html authors):
- tool.sh -
ror32() {
echo $(( ($1 >> $2) | (($1 << (32 - $2) & (2**32-1)) ) ))
}
v="0x$1"
a="0x${v:2:6}"
b=$(( $a + 0x10F0A563))
c=$(( 0x${v:12:14} & 7 ))
p=$(( $(ror32 $b $c) ^ $a ))
printf "ATEN 1,%X\n" $p
- end of tool.sh -
|# bash ./tool.sh 012345678901
|
|ATEN 1,879C711
copy and paste the result into the shell to unlock zloader.
|NBG6716> ATEN 1,0046B0017430
If the entered code was correct the shell will change to
use the ATGU command to enter the real u-boot shell.
|NBG6716> ATGU
|NBG6716#
Signed-off-by: André Valentin <avalentin at marcant.net>
---
.../ath79/base-files/etc/board.d/02_network | 8 +
.../etc/hotplug.d/firmware/10-ath9k-eeprom | 4 +
.../etc/hotplug.d/firmware/11-ath10k-caldata | 4 +
.../etc/hotplug.d/ieee80211/00-wifi-migration | 1 +
.../ath79/base-files/lib/upgrade/platform.sh | 3 +
target/linux/ath79/dts/qca9557.dtsi | 18 ++
.../linux/ath79/dts/qca9558_zyxel_nbg6716.dts | 302 ++++++++++++++++++
target/linux/ath79/image/Makefile | 2 +
target/linux/ath79/image/common-zyxel.mk | 28 ++
target/linux/ath79/image/nand-zyxel.mk | 20 ++
10 files changed, 390 insertions(+)
create mode 100644 target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
create mode 100644 target/linux/ath79/image/common-zyxel.mk
create mode 100644 target/linux/ath79/image/nand-zyxel.mk
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index fe74bddbf1..575e50c12d 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -295,6 +295,10 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0 at eth0" "5:lan" "1:wan"
;;
+ zyxel,nbg6716)
+ ucidef_add_switch "switch0" \
+ "0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6 at eth1"
+ ;;
zbtlink,zbt-wd323|\
xiaomi,mi-router-4q)
ucidef_set_interface_wan "eth1"
@@ -435,6 +439,10 @@ ath79_setup_macs()
wd,mynet-wifi-rangeextender)
lan_mac=$(nvram get et0macaddr)
;;
+ zyxel,nbg6716)
+ lan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
+ wan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
+ ;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 3240026aec..f8241541cd 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -46,6 +46,10 @@ case "$FIRMWARE" in
caldata_extract "radiocfg" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
;;
+ zyxel,nbg6716)
+ ath9k_eeprom_extract "art" 0x1000 0x440
+ ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 0x2
+ ;;
*)
caldata_die "board $board is not supported yet"
;;
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 8ab0f6f6ad..8b885864c6 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -41,6 +41,10 @@ case "$FIRMWARE" in
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
;;
+ zyxel,nbg6716)
+ ath10kcal_extract "art" 0x5000 0x844
+ ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+ ;;
engenius,ews511ap)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/00-wifi-migration b/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/00-wifi-migration
index 37a1346fe7..637bfe9ea0 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/00-wifi-migration
+++ b/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/00-wifi-migration
@@ -14,6 +14,7 @@ migrate_wifi_path() {
board=$(board_name)
case "$board" in
+ zyxel,nbg6716|\
tplink,archer-c7-v1|\
tplink,archer-c7-v2)
path="pci0000:00/0000:00:00.0"
diff --git a/target/linux/ath79/base-files/lib/upgrade/platform.sh b/target/linux/ath79/base-files/lib/upgrade/platform.sh
index f4fca06384..46bd6ab9ef 100644
--- a/target/linux/ath79/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ath79/base-files/lib/upgrade/platform.sh
@@ -51,6 +51,9 @@ platform_do_upgrade() {
ubnt,routerstation-pro)
redboot_fis_do_upgrade "$1" kernel
;;
+ zyxel,nbg6716)
+ nand_do_upgrade "$1"
+ ;;
*)
default_do_upgrade "$1"
;;
diff --git a/target/linux/ath79/dts/qca9557.dtsi b/target/linux/ath79/dts/qca9557.dtsi
index b29dfc72b2..61e1d5f6a4 100644
--- a/target/linux/ath79/dts/qca9557.dtsi
+++ b/target/linux/ath79/dts/qca9557.dtsi
@@ -178,6 +178,24 @@
};
};
+ nand: nand at 1b800200 {
+ compatible = "qca,ar934x-nand";
+ reg = <0x1b800200 0xb8>;
+
+ interrupts = <21>;
+ interrupt-parent = <&miscintc>;
+
+ resets = <&rst 14>;
+ reset-names = "nand";
+
+ nand-ecc-mode = "hw";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
gmac: gmac at 18070000 {
compatible = "qca,qca9550-gmac";
reg = <0x18070000 0x58>;
diff --git a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
new file mode 100644
index 0000000000..677aa7aac5
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9557.dtsi"
+
+/ {
+ compatible = "zyxel,nbg6716", "qca,qca9558";
+ model = "ZyXEL NBG6716";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ label-mac-device = ð0;
+ };
+ leds {
+ compatible = "gpio-leds";
+
+ power: power {
+ label = "nbg6716:white:power";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "nbg6716:white:internet";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+ usb1 {
+ label = "nbg6716:white:usb1";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port0>;
+ };
+ usb2 {
+ label = "nbg6716:white:usb2";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port1>;
+ };
+ wifi2 {
+ label = "nbg6716:white:wifi2";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ wifi5 {
+ label = "nbg6716:white:wifi5";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ wps {
+ label = "nbg6716:white:wps";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wifi_button {
+ label = "WiFi button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ usb1 {
+ label = "USB1 eject button";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ usb2 {
+ label = "USB2 eject button";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_usb_power {
+ gpio-export,name = "nbg6716:power:usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition at 0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition at 40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ art: partition at 50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ partition at 60000 {
+ label = "nbu";
+ reg = <0x060000 0xFA0000>;
+ };
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "zyxel_rfsd";
+ reg = <0x0 0x200000>;
+ };
+
+ partition at 200000 {
+ label = "romd";
+ reg = <0x200000 0x200000>;
+ };
+
+ partition at 400000 {
+ label = "header";
+ reg = <0x400000 0x100000>;
+ };
+
+ firmware at 500000 {
+ label = "firmware";
+ reg = <0x500000 0x7B00000>;
+ };
+
+ partition at 500000 {
+ label = "kernel";
+ reg = <0x500000 0x400000>;
+ };
+
+ partition at 900000 {
+ label = "ubi";
+ reg = <0x900000 0x7700000>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy at 0 {
+ reg = <17>;
+ phy-mode = "rgmii-id";
+ };
+
+ switch0 at 1f {
+ compatible = "qca,ar8327";
+ reg = <0x1f>;
+ qca,ar8327-initvals = <
+ 0x04 0x87600000 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRIP */
+ 0x50 0xffb7ffb7 /* LED_CTRL0 */
+ 0x54 0xffb7ffb7 /* LED_CTRL1 */
+ 0x58 0xffb7ffb7 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+&mdio1 {
+ status = "okay";
+
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ phy-mode = "sgmii";
+ };
+};
+
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0xa6000000 0x00000101 0x00001616>;
+ mtd-mac-address = <&uboot 0x5E2>;
+ phy-handle = <&phy0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+ mtd-mac-address = <&uboot 0x5E2>;
+ mtd-mac-address-increment = <1>;
+ phy-handle = <&phy1>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+// This node is required for the Ethernet ports to work correctly.
+&gpio {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x5E2>;
+ mtd-mac-address-increment = <3>;
+};
+
+&pcie1 {
+ status = "okay";
+
+ wifi at 0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+
+ hub_port0: port at 1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+};
+
+&usb1 {
+ status = "okay";
+
+ hub_port1: port at 1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
diff --git a/target/linux/ath79/image/Makefile b/target/linux/ath79/image/Makefile
index 24768ef5e0..21775b4b48 100644
--- a/target/linux/ath79/image/Makefile
+++ b/target/linux/ath79/image/Makefile
@@ -77,6 +77,8 @@ include ./generic-ubnt.mk
endif
ifeq ($(SUBTARGET),nand)
include ./nand.mk
+include ./nand-netgear.mk
+include ./nand-zyxel.mk
endif
ifeq ($(SUBTARGET),tiny)
include ./tiny.mk
diff --git a/target/linux/ath79/image/common-zyxel.mk b/target/linux/ath79/image/common-zyxel.mk
new file mode 100644
index 0000000000..74f699c7df
--- /dev/null
+++ b/target/linux/ath79/image/common-zyxel.mk
@@ -0,0 +1,28 @@
+DEVICE_VARS += ZYXEL_BOARD_ID
+
+# attention: only zlib compression is allowed for the boot fs
+define Build/zyxel-buildkerneljffs
+ rm -rf $(KDIR_TMP)/zyxelnbg6716
+ mkdir -p $(KDIR_TMP)/zyxelnbg6716/image/boot
+ cp $@ $(KDIR_TMP)/zyxelnbg6716/image/boot/vmlinux.lzma.uImage
+ $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
+ --big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \
+ -o $@ \
+ -d $(KDIR_TMP)/zyxelnbg6716/image
+ rm -rf $(KDIR_TMP)/zyxelnbg6716
+endef
+
+define Build/zyxel-factory
+ cp $@ $(KDIR_TMP)/factory.bin
+ ( \
+ cd $(KDIR_TMP) && \
+ $(STAGING_DIR_HOST)/bin/mkzyxfw-nbg6716 \
+ -i factory.bin \
+ -v "OpenWrt Linux-$(LINUX_VERSION)" \
+ -p "$(ZYXEL_BOARD_ID)" \
+ -s 0x20000 \
+ -o ras.bin \
+ )
+ cat $(KDIR_TMP)/ras.bin $(KDIR_TMP)/factory.bin >$@
+ rm $(KDIR_TMP)/factory.bin $(KDIR_TMP)/ras.bin
+endef
diff --git a/target/linux/ath79/image/nand-zyxel.mk b/target/linux/ath79/image/nand-zyxel.mk
new file mode 100644
index 0000000000..bc177fa49c
--- /dev/null
+++ b/target/linux/ath79/image/nand-zyxel.mk
@@ -0,0 +1,20 @@
+include ./common-zyxel.mk
+
+define Device/zyxel_nbg6716
+ ATH_SOC := qca9558
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct-htt
+ ZYXEL_BOARD_ID := NBG6716
+ KERNEL_SIZE := 4096k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 125000k
+ KERNEL := kernel-bin | append-dtb | uImage none | \
+ zyxel-buildkerneljffs | check-size 4096k
+ IMAGES := factory.ras sysupgrade.tar sysupgrade-4M-Kernel.bin
+ IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$${BLOCKSIZE} | sysupgrade-tar rootfs=$$$$@ | append-metadata
+ IMAGE/sysupgrade-4M-Kernel.bin/squashfs := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+ IMAGE/factory.ras := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | zyxel-factory
+ UBINIZE_OPTS := -E 5
+endef
+TARGET_DEVICES += zyxel_nbg6716
--
2.20.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list