[OpenWrt-Devel] [PATCH 1/2] imx6: bootscript: enable UBI fastmap support

[Tim Harvey]

UBI Fastmap support is stable in the 4.4 kernel so lets take
advantage of it to shave off 5-10 seconds of boot time.

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
 target/linux/imx6/image/bootscript-ventana | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/target/linux/imx6/image/bootscript-ventana b/target/linux/imx6/image/bootscript-ventana
index 941afb5..8451caf 100644
--- a/target/linux/imx6/image/bootscript-ventana
+++ b/target/linux/imx6/image/bootscript-ventana
@@ -1,4 +1,4 @@
-echo "Gateworks Ventana OpenWrt Boot script v1.01"
+echo "Gateworks Ventana OpenWrt Boot script v1.02"
 
 # set some defaults
 # set some defaults
@@ -51,6 +51,8 @@ if itest.s "x${dtype}" == "xnand" ; then
 	echo "mtdparts:${mtdparts}"
 	setenv fsload ubifsload
 	setenv root "ubi0:ubi ubi.mtd=2 rootfstype=squashfs,ubifs"
+	# enable UBI fastmap support
+	setenv bootargs "${bootargs} ubi.fm_autoconvert=1"
 else
 	echo "Booting from block device ${bootdev}..."
 	setenv fsload "${fs}load ${dtype} ${disk}:1"
-- 
2.7.4


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel