[OpenWrt-Devel] OpenWrt 19.07 status

[Stijn Tintel]

On 30/11/2019 22:44, Tom Psyborg wrote:
> On 26/11/2019, Stijn Tintel <stijn at linux-ipv6.be> wrote:
>> On 26/11/2019 00:34, Hauke Mehrtens wrote:
>>> It looks like there is a throughput problem with ath10k-ct on QCA9984,
>>> https://bugs.openwrt.org/index.php?do=details&task_id=2593
>>> there are multiple reports in the Forum.
>>>
>>> For me QCA9880 on a BTHH5A with ath10k-ct on 5GHz works in openwrt 19.07
>>> The AP can do 180 MBit/s TX and only 40 Mbit/s RX over about 8m with a
>>> wall in between with sae-mixed to a Intel iwl8265.
>>> It is also very close to 40MBit/s not much changing the lowest I saw in
>>> about 30 outputs from iperf3 was 38.8 MBit/s and them highest 41.2 MBit/s
>> I am seeing the same low RX with a qca988x AP and an 8265 client. This
>> did not happen earlier this year. I first noticed this on September 5th,
>> but I don't have known good commit hash. The problem goes away when I
>> disable 802.11w. Without 802.11w, I get 300-400Mbps TX and RX.
> Hi
>
> Do you ever plan to merge your lbe-5ac-gen2 branch into main tree?
> Would be nice if the device would get 19.07 release binaries. Code
> testing really sucks if I need to build from source for almost all of
> my devices...

I never got around to test and write installation notes for the commit
message. I've just rebased that branch on master, and am doing that now,
but it seems the ethernet port is no longer functioning now. Link is up
but no traffic received. I'll try to get that sorted but can't promise
anything.

Stijn


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel