[OpenWrt-Devel] OpenWrt 19.07 status

[Stijn Segers]

Op dinsdag 26 november 2019 om 21:30 schreef Stijn Segers 
<foss at volatilesystems.org>:
> 
> 
> Op maandag 25 november 2019 om 23:34 schreef Hauke Mehrtens 
> <hauke at hauke-m.de>:
>> Hi,
>> 
>> There are now quite some changes in the OpenWrt 19.07 branch 
>> compared to
>> the 19.07-rc1.
>> 
>> The builds are looking ok:
>> http://buildbot.openwrt.org/openwrt-19.07/images/grid
>> 
>> I looked through the responses to 19.07-rc1 in the forum and the bug
>> tracker and it looks mostly good.
>> https://forum.openwrt.org/t/openwrt-19-07-0-first-release-candidate/48040
>> https://bugs.openwrt.org/index.php?reported%5B%5D=10
>> 
>> 
>> I saw the following reports:
>> 
>> MT7621/MT7620: NETDEV WATCHDOG: eth0 (mtk_soc_eth):
>> https://bugs.openwrt.org/index.php?do=details&task_id=2628
>> https://bugs.openwrt.org/index.php?do=details&task_id=2617
>> https://bugs.openwrt.org/index.php?do=details&task_id=2605
>> 
>> 
>> It looks like there is a throughput problem with ath10k-ct on 
>> QCA9984,
>> https://bugs.openwrt.org/index.php?do=details&task_id=2593
>> there are multiple reports in the Forum.
>> 
>> For me QCA9880 on a BTHH5A with ath10k-ct on 5GHz works in openwrt 
>> 19.07
>> The AP can do 180 MBit/s TX and only 40 Mbit/s RX over about 8m with 
>> a
>> wall in between with sae-mixed to a Intel iwl8265.
>> It is also very close to 40MBit/s not much changing the lowest I saw 
>> in
>> about 30 outputs from iperf3 was 38.8 MBit/s and them highest 41.2 
>> MBit/s
>> 
>> Are there any more known regressions and serious bugs?
>> 
>> 
>> Images for the following devices are probably too big:
>> * WR902AC
>> * EnGenius ESR-9752  ( EnGenius ESR-9753 )
>> Jow has some pending patches to deactivate support for some of them:
>> https://patchwork.ozlabs.org/project/openwrt/list/?series=143332
>> This looks good to me.
> 
> Hi Hauke, Jow,
> 
> The TP-Link TL-MR3420 v2 images seem too big as well:
> 
> https://forum.openwrt.org/t/openwrt-19-07-0-first-release-candidate/48040/144

Please ignore this, turns out there was v2 support in ar71xx but not 
yet in ath79
when 19.07 got branched.

Stijn

> 
>> 
>> We should mention how to install wpad-openssl or wpad-wolfssl to get
>> WPA3 support in the release notes.
> 
> Excellent point, a lot of people seem to expect WPA3 works OOTB.
> 
> Cheers
> 
> Stijn
> 
>> 
>> Hauke
>> 
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel