[OpenWrt-Devel] [PATCH] ath79: add support for COMFAST CF-E130N v2

[Adrian Schmutzler]

Hi,

> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org] On
> Behalf Of Kryma
> Sent: Montag, 11. November 2019 23:02
> To: openwrt-devel at lists.openwrt.org
> Subject: Re: [OpenWrt-Devel] [PATCH] ath79: add support for COMFAST CF-
> E130N v2
> 
> Hi,
> 
> > That's wrong. You have 0x7d0000, not 0xfd0000 ...
> 
> There seems to be some discrepancy, possibly v1 vs v2. The
> specifications on the website and the partitioning seem to imply a 8MB
> image size - however, U-boot bootloader and the sum of MTD block sizes
> gives us 16MB. Unsure, I tried both 8000 and 16192. Both seem to work
> well, save for some I/O errors when writing files to homedir with both.
> Not sure what that implies, but assuming 16MB as size all that given.

based on how we use it currently, IMAGE_SIZE should match the size of the firmware partition.

> 
> > Will this work without a defined gpio?
> 
> Could you elaborate?

+		rssimediumhigh {
+			label = "cf-e130n-v2:green:rssimediumhigh";
+                        // No individual GPIOs matched this LED!
+		};

Will this still work when using rssimediumhigh in 01_leds?

Best

Adrian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: openpgp-digital-signature.asc
Type: application/pgp-signature
Size: 834 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20191113/ec2e9e5a/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel