[OpenWrt-Devel] [PATCH] ath79: split dts file for Netgear WNDR4300
Michal Cieslakiewicz
michal.cieslakiewicz at wp.pl
Tue Nov 12 08:00:50 EST 2019
Move board configuration to dtsi file in preparation for WNDR3700v4
router support.
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz at wp.pl>
---
.../linux/ath79/dts/ar9344_netgear_wndr.dtsi | 290 ++++++++++++++++++
.../ath79/dts/ar9344_netgear_wndr4300.dts | 286 +----------------
2 files changed, 291 insertions(+), 285 deletions(-)
create mode 100644 target/linux/ath79/dts/ar9344_netgear_wndr.dtsi
diff --git a/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi b/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi
new file mode 100644
index 0000000000..16a4e3f6e8
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9344.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_power_amber;
+ led-failsafe = &led_power_amber;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_amber;
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio_11>;
+
+ led_power_green: power_green {
+ label = "netgear:green:power";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_amber: power_amber {
+ label = "netgear:amber:power";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wan_green {
+ label = "netgear:green:wan";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_amber {
+ label = "netgear:amber:wan";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g_green {
+ label = "netgear:green:wlan2g";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g_blue {
+ label = "netgear:blue:wlan5g";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wps_green {
+ label = "netgear:green:wps";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wps_amber {
+ label = "netgear:amber:wps";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ usb_green {
+ label = "netgear:green:usb";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+ };
+};
+
+&pinmux {
+ enable_gpio_11: pinmux_enable_gpio_11 {
+ pinctrl-single,bits = <0x8 0x0 0xff000000>;
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition at 40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x40000>;
+ };
+
+ art: partition at 80000 {
+ label = "caldata";
+ reg = <0x80000 0x40000>;
+ read-only;
+ };
+
+ partition at c0000 {
+ label = "pot";
+ reg = <0xc0000 0x80000>;
+ };
+
+ partition at 140000 {
+ label = "language";
+ reg = <0x140000 0x200000>;
+ };
+
+ partition at 340000 {
+ label = "config";
+ reg = <0x340000 0x80000>;
+ };
+
+ partition at 3c0000 {
+ label = "traffic_meter";
+ reg = <0x3c0000 0x300000>;
+ };
+
+ kernel at 6c0000 {
+ label = "kernel";
+ reg = <0x6c0000 0x200000>;
+ };
+
+ ubi at 8c0000 {
+ label = "ubi";
+ reg = <0x8c0000 0x1700000>;
+ };
+
+ partition at 6c0000 {
+ label = "firmware";
+ reg = <0x6c0000 0x1900000>;
+ compatible = "netgear,uimage";
+ };
+
+ partition at 1fc0000 {
+ label = "caldata_backup";
+ reg = <0x1fc0000 0x40000>;
+ read-only;
+ };
+
+ partition at 2000000 {
+ label = "reserved";
+ reg = <0x2000000 0x6000000>;
+ read-only;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&builtin_switch {
+ resets = <&rst 8>, <&rst 12>;
+ reset-names = "switch", "switch-analog";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ qca,mib-poll-interval = <500>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000
+ 0x0c 0x01000000
+ 0x10 0xc1000000
+ 0x50 0xcc35cc35
+ 0x54 0xcb37cb37
+ 0x58 0x00000000
+ 0x5c 0x00f3cf00
+ 0x7c 0x0000007e
+ 0x94 0x0000007e
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ /* default for ar934x, except for 1000M */
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
+
+&gpio {
+ status = "okay";
+
+ lna0 {
+ gpio-hog;
+ line-name = "netgear:ext:lna0";
+ gpios = <18 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+
+ lna1 {
+ gpio-hog;
+ line-name = "netgear:ext:lna1";
+ gpios = <19 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+ qca,no-eeprom;
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi at 0,0 {
+ compatible = "pci168c,0033";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&art 0xc>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ usb_power {
+ gpio-hog;
+ line-name = "netgear:power:usb";
+ gpios = <0 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_port: port at 1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&uart {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/ar9344_netgear_wndr4300.dts b/target/linux/ath79/dts/ar9344_netgear_wndr4300.dts
index 08cd84e51e..9b57bb88a6 100644
--- a/target/linux/ath79/dts/ar9344_netgear_wndr4300.dts
+++ b/target/linux/ath79/dts/ar9344_netgear_wndr4300.dts
@@ -1,293 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9344.dtsi"
+#include "ar9344_netgear_wndr.dtsi"
/ {
compatible = "netgear,wndr4300", "qca,ar9344";
model = "Netgear WNDR4300";
-
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
- aliases {
- led-boot = &led_power_amber;
- led-failsafe = &led_power_amber;
- led-running = &led_power_green;
- led-upgrade = &led_power_amber;
- label-mac-device = ð0;
- };
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- };
-
- rfkill {
- label = "rfkill";
- linux,code = <KEY_RFKILL>;
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- pinctrl-names = "default";
- pinctrl-0 = <&enable_gpio_11>;
-
- led_power_green: power_green {
- label = "netgear:green:power";
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- };
-
- led_power_amber: power_amber {
- label = "netgear:amber:power";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- wan_green {
- label = "netgear:green:wan";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- };
-
- wan_amber {
- label = "netgear:amber:wan";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g_green {
- label = "netgear:green:wlan2g";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g_blue {
- label = "netgear:blue:wlan5g";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
-
- wps_green {
- label = "netgear:green:wps";
- gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- };
-
- wps_amber {
- label = "netgear:amber:wps";
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- };
-
- usb_green {
- label = "netgear:green:usb";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- trigger-sources = <&hub_port>;
- linux,default-trigger = "usbport";
- };
- };
-};
-
-&pinmux {
- enable_gpio_11: pinmux_enable_gpio_11 {
- pinctrl-single,bits = <0x8 0x0 0xff000000>;
- };
-};
-
-&nand {
- status = "okay";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- label = "u-boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition at 40000 {
- label = "u-boot-env";
- reg = <0x40000 0x40000>;
- };
-
- art: partition at 80000 {
- label = "caldata";
- reg = <0x80000 0x40000>;
- read-only;
- };
-
- partition at c0000 {
- label = "pot";
- reg = <0xc0000 0x80000>;
- };
-
- partition at 140000 {
- label = "language";
- reg = <0x140000 0x200000>;
- };
-
- partition at 340000 {
- label = "config";
- reg = <0x340000 0x80000>;
- };
-
- partition at 3c0000 {
- label = "traffic_meter";
- reg = <0x3c0000 0x300000>;
- };
-
- kernel at 6c0000 {
- label = "kernel";
- reg = <0x6c0000 0x200000>;
- };
-
- ubi at 8c0000 {
- label = "ubi";
- reg = <0x8c0000 0x1700000>;
- };
-
- partition at 6c0000 {
- label = "firmware";
- reg = <0x6c0000 0x1900000>;
- compatible = "netgear,uimage";
- };
-
- partition at 1fc0000 {
- label = "caldata_backup";
- reg = <0x1fc0000 0x40000>;
- read-only;
- };
-
- partition at 2000000 {
- label = "reserved";
- reg = <0x2000000 0x6000000>;
- read-only;
- };
- };
-};
-
-&ref {
- clock-frequency = <40000000>;
-};
-
-&builtin_switch {
- resets = <&rst 8>, <&rst 12>;
- reset-names = "switch", "switch-analog";
-};
-
-&mdio0 {
- status = "okay";
-
- phy-mask = <0>;
-
- phy0: ethernet-phy at 0 {
- reg = <0>;
- phy-mode = "rgmii";
- qca,mib-poll-interval = <500>;
-
- qca,ar8327-initvals = <
- 0x04 0x07600000
- 0x0c 0x01000000
- 0x10 0xc1000000
- 0x50 0xcc35cc35
- 0x54 0xcb37cb37
- 0x58 0x00000000
- 0x5c 0x00f3cf00
- 0x7c 0x0000007e
- 0x94 0x0000007e
- >;
- };
-};
-
-ð0 {
- status = "okay";
-
- /* default for ar934x, except for 1000M */
- pll-data = <0x06000000 0x00000101 0x00001616>;
-
- mtd-mac-address = <&art 0x0>;
-
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
-};
-
-&gpio {
- status = "okay";
-
- lna0 {
- gpio-hog;
- line-name = "netgear:ext:lna0";
- gpios = <18 GPIO_ACTIVE_HIGH>;
- output-high;
- };
-
- lna1 {
- gpio-hog;
- line-name = "netgear:ext:lna1";
- gpios = <19 GPIO_ACTIVE_HIGH>;
- output-high;
- };
-};
-
-&wmac {
- status = "okay";
-
- mtd-mac-address = <&art 0x0>;
- qca,no-eeprom;
-};
-
-&pcie {
- status = "okay";
-
- ath9k: wifi at 0,0 {
- compatible = "pci168c,0033";
- reg = <0x0000 0 0 0 0>;
- mtd-mac-address = <&art 0xc>;
- qca,no-eeprom;
- #gpio-cells = <2>;
- gpio-controller;
-
- usb_power {
- gpio-hog;
- line-name = "netgear:power:usb";
- gpios = <0 GPIO_ACTIVE_HIGH>;
- output-high;
- };
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub_port: port at 1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&uart {
- status = "okay";
};
--
2.24.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list