[OpenWrt-Devel] [PATCH v2] ath79: add D-Link DIR-615 E4

[Paul Fertser]

On Mon, Nov 11, 2019 at 01:53:10PM +0100, Adrian Schmutzler wrote:
> > I've made specific effort to flash vendor firmware and confirmed by
> > testing on hardware that the vendor firmware doesn't need those
> > partitions. Isn't that enough? What important aspects did I not check?
> 
> I haven't been able to extract that precise information from your
> previous comments (I don't want to blame you for that, maybe I just
> overlooked it ...).
> 
> If stock firmware works without those partitions, removing them is
> fine for me. Please explicitly state in your commit message (after
> telling about the removal) that you tested successfully on vendor
> firmware. :-)

Funny thing but it's exactly the commit message for my v2 where I
tried to express it. For the next version I'll try to make it more
clear. The vendor firmware was split out of a full flash dump I found
on the net (I copied the whole original "firmware" partition with "mtd
write").

-- 
Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
mailto:fercerpav at gmail.com

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel