[OpenWrt-Devel] [PATCH] ath79: add D-Link DIR-615 rev. E4

Adrian Schmutzler mail at adrianschmutzler.de
Tue Nov 5 07:41:59 EST 2019


Hi,

> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org] On
> Behalf Of Paul Fertser
> Sent: Montag, 4. November 2019 22:20
> To: Adrian Schmutzler <mail at adrianschmutzler.de>
> Cc: openwrt-devel at lists.openwrt.org
> Subject: Re: [OpenWrt-Devel] [PATCH] ath79: add D-Link DIR-615 rev. E4
> 
> On Mon, Nov 04, 2019 at 05:16:15PM +0100, Adrian Schmutzler wrote:
> > > +		power_green: power_green {
> > > +			label = "d-link:green:power";
> >
> > It's policy to use boardname instead of "d-link" here, except for tplink as far as I
> know.
> 
> But in this case there're three other boards that can be supported by
> almost the same code (they lack "wlan" led but they also get a bigger
> firmware partition becase they have no "lp" partition). I am not sure
> how to properly add support for all of them, especially given I have
> no way to test on real hardware (except for the E4).

I've just looked into ar71xx leds definitions and it seems like d-link has been used there consistently.
So, ignore my comment in this context and keep your current d-link:green...

Concerning adding further devices:
No merge without testing on device. You can try to build a patch and then look for other people testing, either in the forum or as WIP Pull-Request. You can try to check older commits for that device to ask people for help. But without proper testing we won't accept a support patch, no matter whether it's a new device or just migrated from ar71xx. The only exception may be made when there is clear evidence on a 100 % clone of a supported device just with different name.

Best

Adrian 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: openpgp-digital-signature.asc
Type: application/pgp-signature
Size: 834 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20191105/b24ff2dc/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list