[OpenWrt-Devel] [PATCH 1/2] ath10k-firmware: update Candela Tech firmware images
Robert Marko
robimarko at gmail.com
Thu May 9 11:27:57 EDT 2019
Here are recent release notes:
wave-1:
* April 2, 2019: Support some get/set API for eeprom rate power tables. Mostly
backported from 10.2
* April 2, 2019: Support adaptive-CCA, backported from 10.2
* April 3, 2019: Support adding eeprom configAddr pairs via the set-special API.
These configAddrs can be used to change the default register settings
for up to 12 registers.
* May 3, 2019: Fix tx-power settings for 2x2, 3x3 rates. Original logic I put in back in
2016 set 2x2 and 3x3 lower than the needed to be when using most NICs (very
high powered NICs would not have been affected I think, not sure any of those
exist though.) This improves throughput for 2x2 and 3x3 devices,
especially when the signal is weaker.
wave-2:
* April 8, 2019: When setting keys, if high bit of high value of key_rsc_counter is set to 0x1,
then the lower 48 bits will be used as the PN value. By default, PN is set to
1 each time the key is set.
* April 8, 2019: Pack PN into un-used 'excretries' aka 'num_pkt_loss_excess_retry' high
16 bits. This lets us report peer PN, but *only* if driver has previously
set a PN when setting key (or set-special cmd is used to enable PN reporting).
This is done so that we know the driver is recent
enough to deal with the PN stat reporting.
* April 16, 2019: Support specifying tx rate on a per-beacon packet.
See ath10k_wmi_op_gen_beacon_dma and ath10k_convert_hw_rate_to_rate_info
for API details. Driver needs additional work to actually enable this
feature currently.
* April 30, 2019 Compile out tx-prefetch caching logic. It is full of tricky bugs that cause
tx hangs. I fixed at least one, but more remain and I have wasted too much
time on this already.
* May 8, 2019 Start rate-ctrl at mcs-3 instead of mcs-5. This significantly helps DHCP happen
quickly, probably because the initial rate being too high would take a while to
ramp down, especially since there are few packets sent by the time DHCP needs to
start. This bug was triggered by me decreasing retries of 0x1e (upstream default)
to 0x4. But, I think it is better to start with lower initial MCS instead
of always having a very high retry count.
Tested on 8devices Jalapeno dev board(IPQ4019)
Signed-off-by: Robert Marko <robimarko at gmail.com>
---
package/firmware/ath10k-firmware/Makefile | 48 +++++++++++------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/package/firmware/ath10k-firmware/Makefile b/package/firmware/ath10k-firmware/Makefile
index 452e7a36b3..dca1520ec4 100644
--- a/package/firmware/ath10k-firmware/Makefile
+++ b/package/firmware/ath10k-firmware/Makefile
@@ -64,92 +64,92 @@ define Download/ct-firmware-htt
URL_FILE:=$($(1)_FIRMWARE_FILE_CT_HTT)
endef
-QCA988X_FIRMWARE_FILE_CT:=firmware-2-ct-full-community-22.bin.lede.007
+QCA988X_FIRMWARE_FILE_CT:=firmware-2-ct-full-community-22.bin.lede.008
define Download/ath10k-firmware-qca988x-ct
$(call Download/ct-firmware,QCA988X,)
- HASH:=56b8faa255d053404981fc0e2ffa8dec1aa6adfffd4e4a2af2b6ac25f131ecce
+ HASH:=c2407cbdaaf143c9796e654aed026f0aa70fc93a82dd1244c62e95ede894e829
endef
$(eval $(call Download,ath10k-firmware-qca988x-ct))
-QCA988X_FIRMWARE_FILE_CT_HTT:=firmware-2-ct-full-htt-mgt-community-22.bin.lede.007
+QCA988X_FIRMWARE_FILE_CT_HTT:=firmware-2-ct-full-htt-mgt-community-22.bin.lede.008
define Download/ath10k-firmware-qca988x-ct-htt
$(call Download/ct-firmware-htt,QCA988X,)
- HASH:=f85296afae06548256167a58ecf58f11cc79aba7f96629124dc7b07611f4614f
+ HASH:=789c4d1c8ac5edeb43d507157944102b564cd6970c365a14b50cab08ffa4e3b5
endef
$(eval $(call Download,ath10k-firmware-qca988x-ct-htt))
-QCA9887_FIRMWARE_FILE_CT:=firmware-2-ct-full-community-22.bin.lede.007
+QCA9887_FIRMWARE_FILE_CT:=firmware-2-ct-full-community-22.bin.lede.008
define Download/ath10k-firmware-qca9887-ct
$(call Download/ct-firmware,QCA9887,ath10k-9887)
- HASH:=d42d57ded7de4f8caf4bfd163db0910af7f0e155b11e484dbaa94c341f1e6dec
+ HASH:=07692a63ab9d11a65c17cc896aff89ea33b7af4e0e1e51ae100651291afe3a4d
endef
$(eval $(call Download,ath10k-firmware-qca9887-ct))
-QCA9887_FIRMWARE_FILE_CT_HTT:=firmware-2-ct-full-htt-mgt-community-22.bin.lede.007
+QCA9887_FIRMWARE_FILE_CT_HTT:=firmware-2-ct-full-htt-mgt-community-22.bin.lede.008
define Download/ath10k-firmware-qca9887-ct-htt
$(call Download/ct-firmware-htt,QCA9887,ath10k-9887)
- HASH:=2b016a6f59520925ff9996e458c26dde3422e2d142a36e235cca7aad822ad2b6
+ HASH:=ef336462d4a44ab9a0d89e83064124e647a9fb4a8af8be9df5724378611d2e82
endef
$(eval $(call Download,ath10k-firmware-qca9887-ct-htt))
-QCA99X0_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.007
+QCA99X0_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.008
define Download/ath10k-firmware-qca99x0-ct
$(call Download/ct-firmware,QCA99X0,ath10k-10-4b)
- HASH:=3dbf966fdbad9e55936fa62516e2fcca2a5952030132407f80c41d7da819c82c
+ HASH:=3357d7ba739512619ccd14043338cfe8e148d5d8e99343e3ccf7a2ff0d07d05f
endef
$(eval $(call Download,ath10k-firmware-qca99x0-ct))
-QCA99X0_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.007
+QCA99X0_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.008
define Download/ath10k-firmware-qca99x0-ct-htt
$(call Download/ct-firmware-htt,QCA99X0,ath10k-10-4b)
- HASH:=c98993f541fbe02e88dfd3d5ed70bbaaad228776da29260348c5b00966682b69
+ HASH:=ce81e1b9b80b30263e9d5010e38fac3f005214fd955dc2cff95e7fe633796212
endef
$(eval $(call Download,ath10k-firmware-qca99x0-ct-htt))
-QCA9984_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.007
+QCA9984_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.008
define Download/ath10k-firmware-qca9984-ct
$(call Download/ct-firmware,QCA9984,ath10k-9984-10-4b)
- HASH:=1bdb2f62fb7f6947db992f0dc48b2864b51c7544ff8672a6c7570ecf2273054c
+ HASH:=e2794ce577ff7942dc5f767a77fa52167f323bc8f50f04570fc5efe92ed761cf
endef
$(eval $(call Download,ath10k-firmware-qca9984-ct))
-QCA9984_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.007
+QCA9984_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.008
define Download/ath10k-firmware-qca9984-ct-htt
$(call Download/ct-firmware-htt,QCA9984,ath10k-9984-10-4b)
- HASH:=ff4c4f734711d4ead8a8ed226c5347073a9ce32b60b91d995f197b6e7809b7c6
+ HASH:=1f90555963c2e52ac8fc5581b2a0f9c658e3f5205844898bdc48c78d009bb6eb
endef
$(eval $(call Download,ath10k-firmware-qca9984-ct-htt))
-QCA4019_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.007
+QCA4019_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.008
define Download/ath10k-firmware-qca4019-ct
$(call Download/ct-firmware,QCA4019,ath10k-4019-10-4b)
- HASH:=98568845cf82dea679b1f4dee23f3d3eb39755c6bcdaeb89ed188e52e0f42b2d
+ HASH:=4e73cf8e24e83df87d6dce2038e350b3f67753ccca37a8c0d1b861818991e6aa
endef
$(eval $(call Download,ath10k-firmware-qca4019-ct))
-QCA4019_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.007
+QCA4019_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.008
define Download/ath10k-firmware-qca4019-ct-htt
$(call Download/ct-firmware-htt,QCA4019,ath10k-4019-10-4b)
- HASH:=b791820962e26ba186d2310c024dd16c5ec44bfbbaf40bfeb77ab30bb297e75f
+ HASH:=8f6434856d6f0207bc3f519cf50d2bf45df1bfcbc69b864ed02fcb5cd5ef6f4b
endef
$(eval $(call Download,ath10k-firmware-qca4019-ct-htt))
-QCA9888_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.007
+QCA9888_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.008
define Download/ath10k-firmware-qca9888-ct
$(call Download/ct-firmware,QCA9888,ath10k-9888-10-4b)
- HASH:=f96e5d62c9b5d79cad0b0ff702cdd2644c408bcaeb1bd23f340f0425a002c8cd
+ HASH:=6b627746f88c1bfecb872e72c61d6097192e389592e391630d2661b44f13b10d
endef
$(eval $(call Download,ath10k-firmware-qca9888-ct))
-QCA9888_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.007
+QCA9888_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.008
define Download/ath10k-firmware-qca9888-ct-htt
$(call Download/ct-firmware-htt,QCA9888,ath10k-9888-10-4b)
- HASH:=1f6d872f29d1635df55737458fc054adc64803638b4ad220ce0ccb13be5c0010
+ HASH:=4ef46b2bdd3ddc894f79da2dbf90ee04cb58781f3eb193840bd5fdb8624b447b
endef
$(eval $(call Download,ath10k-firmware-qca9888-ct-htt))
--
2.21.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list