[OpenWrt-Devel] [PATCH RESEND V3 1/2] base-files: improve lib/upgrade/common.sh
Tomasz Maciej Nowak
tomek_n at o2.pl
Thu May 9 09:30:48 EDT 2019
W dniu 08.05.2019 o 20:40, Klaus Kudielka pisze:
> Recently, upgrade device autodetection has been added to the mvebu target.
> This exposes some shortcomings of the generic export_bootdevice function,
> e.g. on the Turris Omnia: export_bootdevice silently reports the root
> partition to be the boot device. This makes the sysupgrade process fail at
> several places.
>
> Fix this by clearly distinguishing between /proc/cmdline arguments which
> specify the boot disk, and those which specify the root partition. Only in
> the latter case, strip off the partition, and do it consistently.
> root=PARTUUID=<pseudo PARTUUID for MBR> (any partition) and root=/dev/*
> (any partition) are accepted.
>
> The root of the problem is that the *existing* export_bootdevice in
> /lib/upgrade/common.sh behaves differently, if the kernel is booted with
> root=/dev/..., or if it is booted with root=PARTUUID=...
>
> In the former case, it reports back major/minor of the root partition,
> in the latter case it reports back major/minor of the complete boot disk.
>
> Targets, which boot with root=/dev/... *and* use export_bootdevice /
> export_partdevice, have added workarounds to this behaviour, by specifying
> *negative* increments to the export_partdevice function.
>
> Consequently, those targets have to be adapted to use positive increments,
> otherwise they are broken by the change to export_bootdevice.
>
> Fixes: 4e8345ff68 ("mvebu: base-files: autodetect upgrade device")
> Signed-off-by: Klaus Kudielka <klaus.kudielka at gmail.com>
Tested-by: Tomasz Maciej Nowak <tomek_n at o2.pl>
on GlobalScale ESPRESSObin.
> ---
> v2:
>
> Remove workarounds for the old, inconsistent behaviour from the following
> targets: apm821xx, brcm2708, omap, sunxi.
>
> v3:
>
> Make export_bootdevice more generic. It now accepts
> root=PARTUUID=<pseudo PARTUUID for MBR> (any partition) and
> root=/dev/* (any partition).
>
> .../base-files/files/lib/upgrade/common.sh | 32 +++++++++++--------
> .../apm821xx/base-files/lib/upgrade/wdbook.sh | 11 ++-----
> .../base-files/lib/upgrade/platform.sh | 11 ++-----
> .../base-files/lib/preinit/79_move_config | 2 +-
> .../omap/base-files/lib/upgrade/platform.sh | 7 ++--
> .../base-files/lib/preinit/79_move_config | 2 +-
> .../sunxi/base-files/lib/upgrade/platform.sh | 7 ++--
> 7 files changed, 33 insertions(+), 39 deletions(-)
>
> diff --git a/package/base-files/files/lib/upgrade/common.sh b/package/base-files/files/lib/upgrade/common.sh
> index b3a29fb32..bbedeefd2 100644
> --- a/package/base-files/files/lib/upgrade/common.sh
> +++ b/package/base-files/files/lib/upgrade/common.sh
> @@ -101,35 +101,41 @@ get_magic_long() {
> }
>
> export_bootdevice() {
> - local cmdline uuid disk uevent line
> + local cmdline bootdisk rootpart uuid blockdev uevent line
> local MAJOR MINOR DEVNAME DEVTYPE
>
> if read cmdline < /proc/cmdline; then
> case "$cmdline" in
> *block2mtd=*)
> - disk="${cmdline##*block2mtd=}"
> - disk="${disk%%,*}"
> + bootdisk="${cmdline##*block2mtd=}"
> + bootdisk="${bootdisk%%,*}"
> ;;
> *root=*)
> - disk="${cmdline##*root=}"
> - disk="${disk%% *}"
> + rootpart="${cmdline##*root=}"
> + rootpart="${rootpart%% *}"
> ;;
> esac
>
> - case "$disk" in
> - PARTUUID=[a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9]-02)
> - uuid="${disk#PARTUUID=}"
> - uuid="${uuid%-02}"
> - for disk in $(find /dev -type b); do
> - set -- $(dd if=$disk bs=1 skip=440 count=4 2>/dev/null | hexdump -v -e '4/1 "%02x "')
> + case "$bootdisk" in
> + /dev/*)
> + uevent="/sys/class/block/${bootdisk##*/}/uevent"
> + ;;
> + esac
> +
> + case "$rootpart" in
> + PARTUUID=[a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9]-[a-f0-9][a-f0-9])
> + uuid="${rootpart#PARTUUID=}"
> + uuid="${uuid%-[a-f0-9][a-f0-9]}"
> + for blockdev in $(find /dev -type b); do
> + set -- $(dd if=$blockdev bs=1 skip=440 count=4 2>/dev/null | hexdump -v -e '4/1 "%02x "')
> if [ "$4$3$2$1" = "$uuid" ]; then
> - uevent="/sys/class/block/${disk##*/}/uevent"
> + uevent="/sys/class/block/${blockdev##*/}/uevent"
> break
> fi
> done
> ;;
> /dev/*)
> - uevent="/sys/class/block/${disk##*/}/uevent"
> + uevent="/sys/class/block/${rootpart##*/}/../uevent"
> ;;
> esac
>
> diff --git a/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh b/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh
> index 2287e0619..c19127114 100644
> --- a/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh
> +++ b/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh
> @@ -7,7 +7,7 @@ mbl_do_platform_check() {
>
> [ "$#" -gt 1 ] && return 1
>
> - export_bootdevice && export_partdevice diskdev -2 || {
> + export_bootdevice && export_partdevice diskdev 0 || {
> echo "Unable to determine upgrade device"
> return 1
> }
> @@ -36,7 +36,7 @@ mbl_do_platform_check() {
> mbl_do_upgrade() {
> local diskdev partdev diff
>
> - export_bootdevice && export_partdevice diskdev -2 || {
> + export_bootdevice && export_partdevice diskdev 0 || {
> echo "Unable to determine upgrade device"
> return 1
> }
> @@ -70,10 +70,6 @@ mbl_do_upgrade() {
>
> #iterate over each partition from the image and write it to the boot disk
> while read part start size; do
> - # root is /dev/sd[a|b]2 and not /dev/sd[a|b] this causes some problem
> - # one of which is this offset, I'm not sure what's the best fix, so
> - # here's a WA.
> - let part=$((part - 2))
> if export_partdevice partdev $part; then
> echo "Writing image to /dev/$partdev..."
> get_image "$@" | dd of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
> @@ -90,8 +86,7 @@ mbl_do_upgrade() {
> mbl_copy_config() {
> local partdev
>
> - # Same as above /dev/sd[a|b]2 is root, so /boot is -1
> - if export_partdevice partdev -1; then
> + if export_partdevice partdev 1; then
> mount -t ext4 -o rw,noatime "/dev/$partdev" /mnt
> cp -af "$CONF_TAR" /mnt/
> umount /mnt
> diff --git a/target/linux/brcm2708/base-files/lib/upgrade/platform.sh b/target/linux/brcm2708/base-files/lib/upgrade/platform.sh
> index 62eede53d..37e479272 100644
> --- a/target/linux/brcm2708/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/brcm2708/base-files/lib/upgrade/platform.sh
> @@ -9,7 +9,7 @@ platform_check_image() {
>
> [ "$#" -gt 1 ] && return 1
>
> - export_bootdevice && export_partdevice diskdev -2 || {
> + export_bootdevice && export_partdevice diskdev 0 || {
> echo "Unable to determine upgrade device"
> return 1
> }
> @@ -38,7 +38,7 @@ platform_check_image() {
> platform_do_upgrade() {
> local diskdev partdev diff
>
> - export_bootdevice && export_partdevice diskdev -2 || {
> + export_bootdevice && export_partdevice diskdev 0 || {
> echo "Unable to determine upgrade device"
> return 1
> }
> @@ -72,10 +72,6 @@ platform_do_upgrade() {
>
> #iterate over each partition from the image and write it to the boot disk
> while read part start size; do
> - # root is /dev/sd[a|b]2 and not /dev/sd[a|b] this causes some problem
> - # one of which is this offset, I'm not sure what's the best fix, so
> - # here's a WA.
> - let part=$((part - 2))
> if export_partdevice partdev $part; then
> echo "Writing image to /dev/$partdev..."
> get_image "$@" | dd of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
> @@ -92,8 +88,7 @@ platform_do_upgrade() {
> platform_copy_config() {
> local partdev
>
> - # Same as above /dev/sd[a|b]2 is root, so /boot is -1
> - if export_partdevice partdev -1; then
> + if export_partdevice partdev 1; then
> mkdir -p /boot
> [ -f /boot/kernel.img ] || mount -t vfat -o rw,noatime "/dev/$partdev" /boot
> cp -af "$CONF_TAR" /boot/
> diff --git a/target/linux/omap/base-files/lib/preinit/79_move_config b/target/linux/omap/base-files/lib/preinit/79_move_config
> index c11258868..83171b3ba 100644
> --- a/target/linux/omap/base-files/lib/preinit/79_move_config
> +++ b/target/linux/omap/base-files/lib/preinit/79_move_config
> @@ -6,7 +6,7 @@ move_config() {
>
> . /lib/upgrade/common.sh
>
> - if export_bootdevice && export_partdevice partdev -1; then
> + if export_bootdevice && export_partdevice partdev 1; then
> if mount -t vfat -o rw,noatime "/dev/$partdev" /mnt; then
> if [ -f /mnt/sysupgrade.tgz ]; then
> mv -f /mnt/sysupgrade.tgz /
> diff --git a/target/linux/omap/base-files/lib/upgrade/platform.sh b/target/linux/omap/base-files/lib/upgrade/platform.sh
> index 88ef4790e..abe910b15 100644
> --- a/target/linux/omap/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/omap/base-files/lib/upgrade/platform.sh
> @@ -1,7 +1,7 @@
> platform_check_image() {
> local diskdev partdev diff
>
> - export_bootdevice && export_partdevice diskdev -2 || {
> + export_bootdevice && export_partdevice diskdev 0 || {
> echo "Unable to determine upgrade device"
> return 1
> }
> @@ -28,7 +28,7 @@ platform_check_image() {
> platform_copy_config() {
> local partdev
>
> - if export_partdevice partdev -1; then
> + if export_partdevice partdev 1; then
> mount -t vfat -o rw,noatime "/dev/$partdev" /mnt
> cp -af "$CONF_TAR" /mnt/
> umount /mnt
> @@ -38,7 +38,7 @@ platform_copy_config() {
> platform_do_upgrade() {
> local diskdev partdev diff
>
> - export_bootdevice && export_partdevice diskdev -2 || {
> + export_bootdevice && export_partdevice diskdev 0 || {
> echo "Unable to determine upgrade device"
> return 1
> }
> @@ -74,7 +74,6 @@ platform_do_upgrade() {
> get_image "$@" | dd of="$diskdev" bs=1024 skip=8 seek=8 count=1016 conv=fsync
> #iterate over each partition from the image and write it to the boot disk
> while read part start size; do
> - part="$(($part - 2))"
> if export_partdevice partdev $part; then
> echo "Writing image to /dev/$partdev..."
> get_image "$@" | dd of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
> diff --git a/target/linux/sunxi/base-files/lib/preinit/79_move_config b/target/linux/sunxi/base-files/lib/preinit/79_move_config
> index c11258868..83171b3ba 100644
> --- a/target/linux/sunxi/base-files/lib/preinit/79_move_config
> +++ b/target/linux/sunxi/base-files/lib/preinit/79_move_config
> @@ -6,7 +6,7 @@ move_config() {
>
> . /lib/upgrade/common.sh
>
> - if export_bootdevice && export_partdevice partdev -1; then
> + if export_bootdevice && export_partdevice partdev 1; then
> if mount -t vfat -o rw,noatime "/dev/$partdev" /mnt; then
> if [ -f /mnt/sysupgrade.tgz ]; then
> mv -f /mnt/sysupgrade.tgz /
> diff --git a/target/linux/sunxi/base-files/lib/upgrade/platform.sh b/target/linux/sunxi/base-files/lib/upgrade/platform.sh
> index 88ef4790e..abe910b15 100644
> --- a/target/linux/sunxi/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/sunxi/base-files/lib/upgrade/platform.sh
> @@ -1,7 +1,7 @@
> platform_check_image() {
> local diskdev partdev diff
>
> - export_bootdevice && export_partdevice diskdev -2 || {
> + export_bootdevice && export_partdevice diskdev 0 || {
> echo "Unable to determine upgrade device"
> return 1
> }
> @@ -28,7 +28,7 @@ platform_check_image() {
> platform_copy_config() {
> local partdev
>
> - if export_partdevice partdev -1; then
> + if export_partdevice partdev 1; then
> mount -t vfat -o rw,noatime "/dev/$partdev" /mnt
> cp -af "$CONF_TAR" /mnt/
> umount /mnt
> @@ -38,7 +38,7 @@ platform_copy_config() {
> platform_do_upgrade() {
> local diskdev partdev diff
>
> - export_bootdevice && export_partdevice diskdev -2 || {
> + export_bootdevice && export_partdevice diskdev 0 || {
> echo "Unable to determine upgrade device"
> return 1
> }
> @@ -74,7 +74,6 @@ platform_do_upgrade() {
> get_image "$@" | dd of="$diskdev" bs=1024 skip=8 seek=8 count=1016 conv=fsync
> #iterate over each partition from the image and write it to the boot disk
> while read part start size; do
> - part="$(($part - 2))"
> if export_partdevice partdev $part; then
> echo "Writing image to /dev/$partdev..."
> get_image "$@" | dd of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
>
--
TMN
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list