[OpenWrt-Devel] [PATCH v3 1/2] base-files: improve lib/upgrade/common.sh
Klaus Kudielka
klaus.kudielka at gmail.com
Tue May 7 01:07:07 EDT 2019
Recently, upgrade device autodetection has been added to the mvebu target.
This exposes some shortcomings of the generic export_bootdevice function,
e.g. on the Turris Omnia: export_bootdevice silently reports the root
partition to be the boot device. This makes the sysupgrade process fail at
several places.
Fix this by clearly distinguishing between /proc/cmdline arguments which
specify the boot disk, and those which specify the root partition. Only in
the latter case, strip off the partition, and do it consistently. Include
/dev/mmcblk* and /dev/sd* as potential arguments to "root=".
The root of the problem is that the *existing* export_bootdevice in
/lib/upgrade/common.sh behaves differently, if the kernel is booted with
root=/dev/..., or if it is booted with root=PARTUUID=...
In the former case, it reports back major/minor of the root partition,
in the latter case it reports back major/minor of the complete boot disk.
The targets mentioned below have added workarounds to this behaviour, by
specifying *negative* increments to the export_partdevice function.
And then came the mvebu target to use export_bootdevice / export_partdevice
as well. Now, different subtargets boot differently, and the workaround
would be even more complex.
I think now is the time to make export_bootdevice behave consistently,
and to report major/minor of the boot disk, period.
Consequently, those targets, which boot with root=/dev/... *and* use
export_bootdevice / export_partdevice, have to be adapted to use
positive increments, otherwise they are broken by the change
to export_bootdevice.
v2:
Remove workarounds for the old, inconsistent behaviour from the following
targets: apm821xx, brcm2708, omap, sunxi. The targets affected were easy
to spot with find & grep.
v3:
Make export_bootdevice more generic. It now accepts
root=PARTUUID=<pseudo PARTUUID for MBR> (any partition) and
root=/dev/* (any partition).
Fixes: 4e8345ff68 ("mvebu: base-files: autodetect upgrade device")
Signed-off-by: Klaus Kudielka <klaus.kudielka at gmail.com>
---
.../base-files/files/lib/upgrade/common.sh | 32 +++++++++++--------
.../apm821xx/base-files/lib/upgrade/wdbook.sh | 11 ++-----
.../base-files/lib/upgrade/platform.sh | 11 ++-----
.../base-files/lib/preinit/79_move_config | 2 +-
.../omap/base-files/lib/upgrade/platform.sh | 7 ++--
.../base-files/lib/preinit/79_move_config | 2 +-
.../sunxi/base-files/lib/upgrade/platform.sh | 7 ++--
7 files changed, 33 insertions(+), 39 deletions(-)
diff --git a/package/base-files/files/lib/upgrade/common.sh b/package/base-files/files/lib/upgrade/common.sh
index b3a29fb32..bbedeefd2 100644
--- a/package/base-files/files/lib/upgrade/common.sh
+++ b/package/base-files/files/lib/upgrade/common.sh
@@ -101,35 +101,41 @@ get_magic_long() {
}
export_bootdevice() {
- local cmdline uuid disk uevent line
+ local cmdline bootdisk rootpart uuid blockdev uevent line
local MAJOR MINOR DEVNAME DEVTYPE
if read cmdline < /proc/cmdline; then
case "$cmdline" in
*block2mtd=*)
- disk="${cmdline##*block2mtd=}"
- disk="${disk%%,*}"
+ bootdisk="${cmdline##*block2mtd=}"
+ bootdisk="${bootdisk%%,*}"
;;
*root=*)
- disk="${cmdline##*root=}"
- disk="${disk%% *}"
+ rootpart="${cmdline##*root=}"
+ rootpart="${rootpart%% *}"
;;
esac
- case "$disk" in
- PARTUUID=[a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9]-02)
- uuid="${disk#PARTUUID=}"
- uuid="${uuid%-02}"
- for disk in $(find /dev -type b); do
- set -- $(dd if=$disk bs=1 skip=440 count=4 2>/dev/null | hexdump -v -e '4/1 "%02x "')
+ case "$bootdisk" in
+ /dev/*)
+ uevent="/sys/class/block/${bootdisk##*/}/uevent"
+ ;;
+ esac
+
+ case "$rootpart" in
+ PARTUUID=[a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9]-[a-f0-9][a-f0-9])
+ uuid="${rootpart#PARTUUID=}"
+ uuid="${uuid%-[a-f0-9][a-f0-9]}"
+ for blockdev in $(find /dev -type b); do
+ set -- $(dd if=$blockdev bs=1 skip=440 count=4 2>/dev/null | hexdump -v -e '4/1 "%02x "')
if [ "$4$3$2$1" = "$uuid" ]; then
- uevent="/sys/class/block/${disk##*/}/uevent"
+ uevent="/sys/class/block/${blockdev##*/}/uevent"
break
fi
done
;;
/dev/*)
- uevent="/sys/class/block/${disk##*/}/uevent"
+ uevent="/sys/class/block/${rootpart##*/}/../uevent"
;;
esac
diff --git a/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh b/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh
index 2287e0619..c19127114 100644
--- a/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh
+++ b/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh
@@ -7,7 +7,7 @@ mbl_do_platform_check() {
[ "$#" -gt 1 ] && return 1
- export_bootdevice && export_partdevice diskdev -2 || {
+ export_bootdevice && export_partdevice diskdev 0 || {
echo "Unable to determine upgrade device"
return 1
}
@@ -36,7 +36,7 @@ mbl_do_platform_check() {
mbl_do_upgrade() {
local diskdev partdev diff
- export_bootdevice && export_partdevice diskdev -2 || {
+ export_bootdevice && export_partdevice diskdev 0 || {
echo "Unable to determine upgrade device"
return 1
}
@@ -70,10 +70,6 @@ mbl_do_upgrade() {
#iterate over each partition from the image and write it to the boot disk
while read part start size; do
- # root is /dev/sd[a|b]2 and not /dev/sd[a|b] this causes some problem
- # one of which is this offset, I'm not sure what's the best fix, so
- # here's a WA.
- let part=$((part - 2))
if export_partdevice partdev $part; then
echo "Writing image to /dev/$partdev..."
get_image "$@" | dd of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
@@ -90,8 +86,7 @@ mbl_do_upgrade() {
mbl_copy_config() {
local partdev
- # Same as above /dev/sd[a|b]2 is root, so /boot is -1
- if export_partdevice partdev -1; then
+ if export_partdevice partdev 1; then
mount -t ext4 -o rw,noatime "/dev/$partdev" /mnt
cp -af "$CONF_TAR" /mnt/
umount /mnt
diff --git a/target/linux/brcm2708/base-files/lib/upgrade/platform.sh b/target/linux/brcm2708/base-files/lib/upgrade/platform.sh
index 62eede53d..37e479272 100644
--- a/target/linux/brcm2708/base-files/lib/upgrade/platform.sh
+++ b/target/linux/brcm2708/base-files/lib/upgrade/platform.sh
@@ -9,7 +9,7 @@ platform_check_image() {
[ "$#" -gt 1 ] && return 1
- export_bootdevice && export_partdevice diskdev -2 || {
+ export_bootdevice && export_partdevice diskdev 0 || {
echo "Unable to determine upgrade device"
return 1
}
@@ -38,7 +38,7 @@ platform_check_image() {
platform_do_upgrade() {
local diskdev partdev diff
- export_bootdevice && export_partdevice diskdev -2 || {
+ export_bootdevice && export_partdevice diskdev 0 || {
echo "Unable to determine upgrade device"
return 1
}
@@ -72,10 +72,6 @@ platform_do_upgrade() {
#iterate over each partition from the image and write it to the boot disk
while read part start size; do
- # root is /dev/sd[a|b]2 and not /dev/sd[a|b] this causes some problem
- # one of which is this offset, I'm not sure what's the best fix, so
- # here's a WA.
- let part=$((part - 2))
if export_partdevice partdev $part; then
echo "Writing image to /dev/$partdev..."
get_image "$@" | dd of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
@@ -92,8 +88,7 @@ platform_do_upgrade() {
platform_copy_config() {
local partdev
- # Same as above /dev/sd[a|b]2 is root, so /boot is -1
- if export_partdevice partdev -1; then
+ if export_partdevice partdev 1; then
mkdir -p /boot
[ -f /boot/kernel.img ] || mount -t vfat -o rw,noatime "/dev/$partdev" /boot
cp -af "$CONF_TAR" /boot/
diff --git a/target/linux/omap/base-files/lib/preinit/79_move_config b/target/linux/omap/base-files/lib/preinit/79_move_config
index c11258868..83171b3ba 100644
--- a/target/linux/omap/base-files/lib/preinit/79_move_config
+++ b/target/linux/omap/base-files/lib/preinit/79_move_config
@@ -6,7 +6,7 @@ move_config() {
. /lib/upgrade/common.sh
- if export_bootdevice && export_partdevice partdev -1; then
+ if export_bootdevice && export_partdevice partdev 1; then
if mount -t vfat -o rw,noatime "/dev/$partdev" /mnt; then
if [ -f /mnt/sysupgrade.tgz ]; then
mv -f /mnt/sysupgrade.tgz /
diff --git a/target/linux/omap/base-files/lib/upgrade/platform.sh b/target/linux/omap/base-files/lib/upgrade/platform.sh
index 88ef4790e..abe910b15 100644
--- a/target/linux/omap/base-files/lib/upgrade/platform.sh
+++ b/target/linux/omap/base-files/lib/upgrade/platform.sh
@@ -1,7 +1,7 @@
platform_check_image() {
local diskdev partdev diff
- export_bootdevice && export_partdevice diskdev -2 || {
+ export_bootdevice && export_partdevice diskdev 0 || {
echo "Unable to determine upgrade device"
return 1
}
@@ -28,7 +28,7 @@ platform_check_image() {
platform_copy_config() {
local partdev
- if export_partdevice partdev -1; then
+ if export_partdevice partdev 1; then
mount -t vfat -o rw,noatime "/dev/$partdev" /mnt
cp -af "$CONF_TAR" /mnt/
umount /mnt
@@ -38,7 +38,7 @@ platform_copy_config() {
platform_do_upgrade() {
local diskdev partdev diff
- export_bootdevice && export_partdevice diskdev -2 || {
+ export_bootdevice && export_partdevice diskdev 0 || {
echo "Unable to determine upgrade device"
return 1
}
@@ -74,7 +74,6 @@ platform_do_upgrade() {
get_image "$@" | dd of="$diskdev" bs=1024 skip=8 seek=8 count=1016 conv=fsync
#iterate over each partition from the image and write it to the boot disk
while read part start size; do
- part="$(($part - 2))"
if export_partdevice partdev $part; then
echo "Writing image to /dev/$partdev..."
get_image "$@" | dd of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
diff --git a/target/linux/sunxi/base-files/lib/preinit/79_move_config b/target/linux/sunxi/base-files/lib/preinit/79_move_config
index c11258868..83171b3ba 100644
--- a/target/linux/sunxi/base-files/lib/preinit/79_move_config
+++ b/target/linux/sunxi/base-files/lib/preinit/79_move_config
@@ -6,7 +6,7 @@ move_config() {
. /lib/upgrade/common.sh
- if export_bootdevice && export_partdevice partdev -1; then
+ if export_bootdevice && export_partdevice partdev 1; then
if mount -t vfat -o rw,noatime "/dev/$partdev" /mnt; then
if [ -f /mnt/sysupgrade.tgz ]; then
mv -f /mnt/sysupgrade.tgz /
diff --git a/target/linux/sunxi/base-files/lib/upgrade/platform.sh b/target/linux/sunxi/base-files/lib/upgrade/platform.sh
index 88ef4790e..abe910b15 100644
--- a/target/linux/sunxi/base-files/lib/upgrade/platform.sh
+++ b/target/linux/sunxi/base-files/lib/upgrade/platform.sh
@@ -1,7 +1,7 @@
platform_check_image() {
local diskdev partdev diff
- export_bootdevice && export_partdevice diskdev -2 || {
+ export_bootdevice && export_partdevice diskdev 0 || {
echo "Unable to determine upgrade device"
return 1
}
@@ -28,7 +28,7 @@ platform_check_image() {
platform_copy_config() {
local partdev
- if export_partdevice partdev -1; then
+ if export_partdevice partdev 1; then
mount -t vfat -o rw,noatime "/dev/$partdev" /mnt
cp -af "$CONF_TAR" /mnt/
umount /mnt
@@ -38,7 +38,7 @@ platform_copy_config() {
platform_do_upgrade() {
local diskdev partdev diff
- export_bootdevice && export_partdevice diskdev -2 || {
+ export_bootdevice && export_partdevice diskdev 0 || {
echo "Unable to determine upgrade device"
return 1
}
@@ -74,7 +74,6 @@ platform_do_upgrade() {
get_image "$@" | dd of="$diskdev" bs=1024 skip=8 seek=8 count=1016 conv=fsync
#iterate over each partition from the image and write it to the boot disk
while read part start size; do
- part="$(($part - 2))"
if export_partdevice partdev $part; then
echo "Writing image to /dev/$partdev..."
get_image "$@" | dd of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
--
2.17.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list