[OpenWrt-Devel] [PATCH v2] ramips: Add support for Head Weblink HDRM200
Petr Štetiar
ynezz at true.cz
Fri May 3 12:32:47 EDT 2019
Kristian Evensen <kristian.evensen at gmail.com> [2019-05-03 16:58:52]:
Hi,
> In order to install OpenWRT, you first need to compile an initramfs
> (ramdisk)-image for the device.
if the ramdisk image is needed, then we probably should enable it for that
target and provide it, we shouldn't demand end users to build the ramdisk
images by themselves in order to be able to install OpenWrt, right?
This needs adding `ramdisk` in FEATURES in target.mk.
> * Copy the initramfs-image to your tftp-root (default filename is
> test.bin) and configure networking accordingly (default server IP is
> 10.10.10.3, client 10.10.10.123). Start your tftp server.
> * Open the board and connect to UART. The pins are exposed and clearly
> marked.
> * Boot the board and press 1.
> * Either use the default filename and client/server IP-addresses, or
> specify your own.
>
> The image should now be loaded to memory and board boot. If the router
> reboots while the image is loading, you need to try again.
Why does it reboot? Is there any kind of watchdog? Do you get any error in the
bootloader?
> diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
> index fa20ab0714..f9ca5c47b8 100755
> --- a/target/linux/ramips/base-files/etc/board.d/01_leds
> +++ b/target/linux/ramips/base-files/etc/board.d/01_leds
> @@ -184,6 +184,9 @@ hc5861)
> ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
> ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
> ;;
> +hdrm200)
this should match device from the DT compatible property and use generic
board/model detection as introduced in commit b3d699bdd3caa3d ("base-files:
add generic preinit script to extract board/model info from device-tree").
> + set_wifi_led "$boardname:green:wifi"
> + ;;
> hg255d)
> set_wifi_led "$boardname:green:wlan"
> ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2"
> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
> index c2646876a2..8ae41ae59e 100755
> --- a/target/linux/ramips/base-files/etc/board.d/02_network
> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> @@ -314,6 +314,7 @@ ramips_setup_interfaces()
> "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6 at eth0"
> ;;
> hc5661|\
> + hdrm200|\
ditto here.
> y1s)
> ucidef_add_switch "switch0" \
> "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6 at eth0"
> diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
> index 093303892c..6d5a9cc391 100755
> --- a/target/linux/ramips/base-files/lib/ramips.sh
> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> @@ -229,6 +229,9 @@ ramips_board_detect() {
> *"HC5962")
> name="hc5962"
> ;;
> + *"HDRM200")
> + name="hdrm200"
> + ;;
so this is not necessary anymore and you can drop it.
> diff --git a/target/linux/ramips/dts/HDRM200.dts b/target/linux/ramips/dts/HDRM200.dts
> new file mode 100644
> index 0000000000..05e0b1a6dc
> --- /dev/null
> +++ b/target/linux/ramips/dts/HDRM200.dts
...
> + gpio-export {
> + compatible = "gpio-export";
> + #size-cells = <0>;
> +
> + sim_switch {
> + gpio-export,name = "sim_switch";
> + gpio-export,output = <1>;
> + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
> + };
> +
> + io1 {
> + gpio-export,name = "io1";
> + gpio-export,output = <1>;
> + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
> + };
> +
> + io2 {
> + gpio-export,name = "io2";
> + gpio-export,output = <1>;
> + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + io3 {
> + gpio-export,name = "io3";
> + gpio-export,output = <1>;
> + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
> + };
> +
> + io4 {
> + gpio-export,name = "io4";
> + gpio-export,output = <1>;
> + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
> + };
> +
> + power_mpcie {
> + gpio-export,name = "power_mpcie";
> + gpio-export,output = <1>;
> + gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
> + };
> + };
We're trying to get rid of the `gpio-export` functionality as it's hack for
missing kernel functionality, which was rejected in upstream kernel long time
ago, for details see this email
http://lists.infradead.org/pipermail/openwrt-devel/2019-February/015772.html,
discussion in #1366 or
https://github.com/openwrt/openwrt/pull/1814#issuecomment-462942022.
So I'm wondering if it would be possible to replace the `gpio-export`
construct with the userspace gpio-switch alternative, for example
https://github.com/openwrt/openwrt/blob/master/target/linux/layerscape/base-files/etc/board.d/03_gpio_switches#L20-L22
> +&spi0 {
> + status = "okay";
> +
> + w25q128 at 0 {
Can you please change the node name to more generic name `flash at 0` and try if
it boots for you?
> +ðernet {
> + status = "okay";
I would add newline here in order to separate the `status` property from the
rest.
> +&pinctrl {
> + state_default: pinctrl0 {
> + default {
> + ralink,group = "i2c", "uartf", "pa", "spi refclk", "wled";
> + ralink,function = "gpio";
> + };
> + };
> +};
...
> --- a/target/linux/ramips/image/mt7620.mk
> +++ b/target/linux/ramips/image/mt7620.mk
> @@ -358,6 +358,14 @@ define Device/hc5861
> endef
> TARGET_DEVICES += hc5861
>
> +define Device/hdrm200
this should be set to `Device/head-weblink_hdrm200` in order to add
SUPPORTED_DEVICES variable with the proper value, matching the one in the DT
compatible.
> + DTS := HDRM200
> + IMAGE_SIZE := $(ralink_default_fw_size_16M)
> + DEVICE_TITLE := Head Weblink HDRM2000
> + DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620
> +endef
> +TARGET_DEVICES += hdrm200
TARGET_DEVICES += head-weblink_hdrm200
-- ynezz
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list