[OpenWrt-Devel] [PATCH] ar71xx: add support for MikroTik RouterBOARD 922UAGS-5HPacD
Koen Vandeputte
koen.vandeputte at ncentric.com
Mon Mar 25 11:54:43 EDT 2019
This patch adds support for the MikroTik RouterBOARD 922UAGS-5HPacD
with a built-in 802.11ac High-Power radio (31dBm).
See https://mikrotik.com/product/RB922UAGS-5HPacD for more info.
Specifications:
- SoC: Qualcomm Atheros QCA9557 (720 MHz)
- RAM: 128 MB
- Storage: 128 MB NAND
- Wireless: external QCA9882 802.11a/ac 2x2:2
- Ethernet: 1x 1000/100/10 Mbps, integrated, via AR8031 PHY, passive
PoE in
- SFP: 1x host
- USB: 1x 2.0 type A
- PCIe: 1x Mini slot (also contains USB 2.0 for 3G/LTE modems)
- SIM slot: 1x mini-SIM
Working:
- Board/system detection
- NAND storage detection
- PCIe
- USB
- Wireless
- Ethernet
- LED's (excl. SFP)
- Reset button
- Sysupgrade
Not working:
- Switching USB lanes towards Type-A slot (GPIO pin nr unknown)
- SFP cage
Notes:
The USB controller needs to be switched to either the Type-A slot, or
the PCIe socket. It's not possible to use both concurrently.
Selection can be done by toggling a GPIO.
By default, the USB is routed to the mini-PCIe slot.
Installation:
- Boot vmlinux-initramfs image via BOOTP/TFTP and then flash sysupgrade
image using "sysupgrade -n"
Signed-off-by: Koen Vandeputte <koen.vandeputte at ncentric.com>
---
.../ar71xx/base-files/etc/board.d/02_network | 1 +
.../etc/hotplug.d/firmware/11-ath10k-caldata | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 2 +
.../ar71xx/files/arch/mips/ath79/mach-rb922.c | 102 +++++++++++++-----
target/linux/ar71xx/image/mikrotik.mk | 2 +-
6 files changed, 83 insertions(+), 28 deletions(-)
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 0588e1b3c156..8dd2f6c6c039 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -107,6 +107,7 @@ ar71xx_setup_interfaces()
rb-912uag-2hpnd|\
rb-912uag-5hpnd|\
rb-921gs-5hpacd-r2|\
+ rb-922uags-5hpacd|\
rb-lhg-5nd|\
rb-mapl-2nd|\
rb-sxt2n|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index cd5c1c2bcb80..2ded261c8891 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -156,6 +156,7 @@ case "$FIRMWARE" in
;;
rb-911g-5hpacd|\
rb-921gs-5hpacd-r2|\
+ rb-922uags-5hpacd|\
rb-962uigs-5hact2hnt)
ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116
;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 166def960180..9a123b60e1ac 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -1089,6 +1089,9 @@ ar71xx_board_detect() {
*"RouterBOARD 921GS-5HPacD r2")
name="rb-921gs-5hpacd-r2"
;;
+ *"RouterBOARD 922UAGS-5HPacD")
+ name="rb-922uags-5hpacd"
+ ;;
*"RouterBOARD 931-2nD")
name="rb-931-2nd"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index e970b6482d1b..e9227aaa7b77 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -557,6 +557,7 @@ platform_check_image() {
rb-912uag-2hpnd|\
rb-912uag-5hpnd|\
rb-921gs-5hpacd-r2|\
+ rb-922uags-5hpacd|\
rb-951g-2hnd|\
rb-951ui-2hnd|\
rb-2011l|\
@@ -878,6 +879,7 @@ platform_do_upgrade() {
rb-912uag-2hpnd|\
rb-912uag-5hpnd|\
rb-921gs-5hpacd-r2|\
+ rb-922uags-5hpacd|\
rb-951g-2hnd|\
rb-951ui-2hnd|\
rb-2011il|\
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c
index 43bcc99fc7cd..7895422bc972 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c
@@ -1,5 +1,5 @@
/*
- * MikroTik RouterBOARD 91X support
+ * MikroTik RouterBOARD 92X support
*
* Copyright (C) 2015 Gabor Juhos <juhosg at openwrt.org>
*
@@ -49,6 +49,9 @@
#define RB922_GPIO_BTN_RESET 20
#define RB922_GPIO_NAND_NCE 23
+#define RB92X_FLAG_USB BIT(0)
+#define RB92X_FLAG_PCIE BIT(1)
+
#define RB922_PHY_ADDR 4
#define RB922_KEYS_POLL_INTERVAL 20 /* msecs */
@@ -62,6 +65,11 @@
#define RB_SOFT_CFG_OFFSET 0xf000
#define RB_SOFT_CFG_SIZE 0x1000
+struct rb_board_info {
+ const char *name;
+ u32 flags;
+};
+
static struct mtd_partition rb922gs_spi_partitions[] = {
{
.name = "routerboot",
@@ -82,6 +90,32 @@ static struct mtd_partition rb922gs_spi_partitions[] = {
}
};
+static void __init rb922gs_init_partitions(const struct rb_info *info)
+{
+ rb922gs_spi_partitions[0].size = info->hard_cfg_offs;
+ rb922gs_spi_partitions[1].offset = info->hard_cfg_offs;
+ rb922gs_spi_partitions[3].offset = info->soft_cfg_offs;
+}
+
+static struct mtd_partition rb922gs_nand_partitions[] = {
+ {
+ .name = "booter",
+ .offset = 0,
+ .size = (256 * 1024),
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .offset = (256 * 1024),
+ .size = (4 * 1024 * 1024) - (256 * 1024),
+ },
+ {
+ .name = "ubi",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
static struct flash_platform_data rb922gs_spi_flash_data = {
.parts = rb922gs_spi_partitions,
.nr_parts = ARRAY_SIZE(rb922gs_spi_partitions),
@@ -118,12 +152,7 @@ static struct mdio_board_info rb922gs_mdio0_info[] = {
},
};
-static void __init rb922gs_init_partitions(const struct rb_info *info)
-{
- rb922gs_spi_partitions[0].size = info->hard_cfg_offs;
- rb922gs_spi_partitions[1].offset = info->hard_cfg_offs;
- rb922gs_spi_partitions[3].offset = info->soft_cfg_offs;
-}
+
static void rb922gs_nand_select_chip(int chip_no)
{
@@ -221,25 +250,6 @@ static int rb922gs_nand_scan_fixup(struct mtd_info *mtd)
return 0;
}
-static struct mtd_partition rb922gs_nand_partitions[] = {
- {
- .name = "booter",
- .offset = 0,
- .size = (256 * 1024),
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "kernel",
- .offset = (256 * 1024),
- .size = (4 * 1024 * 1024) - (256 * 1024),
- },
- {
- .name = "ubi",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
static void __init rb922gs_nand_init(void)
{
gpio_request_one(RB922_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
@@ -252,10 +262,37 @@ static void __init rb922gs_nand_init(void)
ath79_register_nfc();
}
+#define RB_BOARD_INFO(_name, _flags) \
+ { \
+ .name = (_name), \
+ .flags = (_flags), \
+ }
+
+static const struct rb_board_info rb92x_boards[] __initconst = {
+ RB_BOARD_INFO("921GS-5HPacD r2", RB92X_FLAG_PCIE),
+ RB_BOARD_INFO("922UAGS-5HPacD", RB92X_FLAG_USB | RB92X_FLAG_PCIE),
+};
+
+static u32 rb92x_get_flags(const struct rb_info *info)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(rb92x_boards); i++) {
+ const struct rb_board_info *bi;
+
+ bi = &rb92x_boards[i];
+ if (strcmp(info->board_name, bi->name) == 0)
+ return bi->flags;
+ }
+
+ return 0;
+}
+
static void __init rb922gs_setup(void)
{
const struct rb_info *info;
char buf[64];
+ u32 flags;
info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000);
if (!info)
@@ -281,7 +318,9 @@ static void __init rb922gs_setup(void)
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(RB922_PHY_ADDR);
- if (strcmp(info->board_name, "921GS-5HPacD r2") == 0) {
+ if (strcmp(info->board_name, "921GS-5HPacD r2") == 0 ||
+ strcmp(info->board_name, "922UAGS-5HPacD") == 0)
+ {
ath79_eth0_pll_data.pll_10 = 0xa0001313;
ath79_eth0_pll_data.pll_100 = 0xa0000101;
ath79_eth0_pll_data.pll_1000 = 0x8f000000;
@@ -294,7 +333,16 @@ static void __init rb922gs_setup(void)
ath79_register_eth(0);
+ flags = rb92x_get_flags(info);
+
+ if (flags & RB92X_FLAG_USB)
+ ath79_register_usb();
+
+ if (flags & RB92X_FLAG_PCIE)
+ ath79_register_pci();
+
ath79_register_pci();
+ ath79_register_usb();
ath79_register_leds_gpio(-1, ARRAY_SIZE(rb922gs_leds), rb922gs_leds);
ath79_register_gpio_keys_polled(-1, RB922_KEYS_POLL_INTERVAL,
ARRAY_SIZE(rb922gs_gpio_keys),
diff --git a/target/linux/ar71xx/image/mikrotik.mk b/target/linux/ar71xx/image/mikrotik.mk
index 96dff4905fb2..23d348b6a981 100644
--- a/target/linux/ar71xx/image/mikrotik.mk
+++ b/target/linux/ar71xx/image/mikrotik.mk
@@ -36,7 +36,7 @@ define Device/nand-large-ac
MIKROTIK_CHUNKSIZE := 2048
DEVICE_TITLE := MikroTik RouterBoard (>= 128 MB NAND, 802.11ac)
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
- SUPPORTED_DEVICES := rb-921gs-5hpacd-r2
+ SUPPORTED_DEVICES := rb-921gs-5hpacd-r2 rb-922uags-5hpacd
endef
TARGET_DEVICES += nand-large-ac
--
2.17.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list