[OpenWrt-Devel] [PATCH 1/3] ramips: ethernet: Replace alloc_etherdev with devm variant

Rosen Penev rosenp at gmail.com
Wed Mar 13 17:05:42 EDT 2019


Allows simplifying the code slightly.

Also get rid of devm_iounmap as it is not necessary.

Tested on GnuBee PC1.

Signed-off-by: Rosen Penev <rosenp at gmail.com>
---
 .../net/ethernet/mediatek/mtk_eth_soc.c       | 38 ++++++-------------
 1 file changed, 11 insertions(+), 27 deletions(-)

diff --git a/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 2e0c8f94ca..d110787731 100644
--- a/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -1559,16 +1559,13 @@ static int fe_probe(struct platform_device *pdev)
 		soc->reg_table = fe_reg_table;
 
 	fe_base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(fe_base)) {
-		err = -EADDRNOTAVAIL;
-		goto err_out;
-	}
+	if (IS_ERR(fe_base))
+		 return PTR_ERR(fe_base);
 
-	netdev = alloc_etherdev(sizeof(*priv));
+	netdev = devm_alloc_etherdev(&pdev->dev, sizeof(*priv));
 	if (!netdev) {
-		dev_err(&pdev->dev, "alloc_etherdev failed\n");
-		err = -ENOMEM;
-		goto err_iounmap;
+		dev_err(&pdev->dev, "devm_alloc_etherdev failed\n");
+		return -ENOMEM;
 	}
 
 	SET_NETDEV_DEV(netdev, &pdev->dev);
@@ -1578,8 +1575,7 @@ static int fe_probe(struct platform_device *pdev)
 	netdev->irq = platform_get_irq(pdev, 0);
 	if (netdev->irq < 0) {
 		dev_err(&pdev->dev, "no IRQ resource found\n");
-		err = -ENXIO;
-		goto err_free_dev;
+		return -ENXIO;
 	}
 
 	if (soc->init_data)
@@ -1598,10 +1594,8 @@ static int fe_probe(struct platform_device *pdev)
 	spin_lock_init(&priv->page_lock);
 	if (fe_reg_table[FE_REG_FE_COUNTER_BASE]) {
 		priv->hw_stats = kzalloc(sizeof(*priv->hw_stats), GFP_KERNEL);
-		if (!priv->hw_stats) {
-			err = -ENOMEM;
-			goto err_free_dev;
-		}
+		if (!priv->hw_stats)
+			return -ENOMEM;
 		spin_lock_init(&priv->hw_stats->stats_lock);
 	}
 
@@ -1610,15 +1604,13 @@ static int fe_probe(struct platform_device *pdev)
 		priv->sysclk = clk_get_rate(sysclk);
 	} else if ((priv->flags & FE_FLAG_CALIBRATE_CLK)) {
 		dev_err(&pdev->dev, "this soc needs a clk for calibration\n");
-		err = -ENXIO;
-		goto err_free_dev;
+		return -ENXIO;
 	}
 
 	priv->switch_np = of_parse_phandle(pdev->dev.of_node, "mediatek,switch", 0);
 	if ((priv->flags & FE_FLAG_HAS_SWITCH) && !priv->switch_np) {
 		dev_err(&pdev->dev, "failed to read switch phandle\n");
-		err = -ENODEV;
-		goto err_free_dev;
+		return -ENODEV;
 	}
 
 	priv->netdev = netdev;
@@ -1644,7 +1636,7 @@ static int fe_probe(struct platform_device *pdev)
 	err = register_netdev(netdev);
 	if (err) {
 		dev_err(&pdev->dev, "error bringing up device\n");
-		goto err_free_dev;
+		return err;
 	}
 
 	platform_set_drvdata(pdev, netdev);
@@ -1653,13 +1645,6 @@ static int fe_probe(struct platform_device *pdev)
 		   netdev->base_addr, netdev->irq);
 
 	return 0;
-
-err_free_dev:
-	free_netdev(netdev);
-err_iounmap:
-	devm_iounmap(&pdev->dev, fe_base);
-err_out:
-	return err;
 }
 
 static int fe_remove(struct platform_device *pdev)
@@ -1673,7 +1658,6 @@ static int fe_remove(struct platform_device *pdev)
 	cancel_work_sync(&priv->pending_work);
 
 	unregister_netdev(dev);
-	free_netdev(dev);
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
-- 
2.17.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list