[OpenWrt-Devel] [PATCH] ramips: ethernet: fix to interrupt handling
Rosen Penev
rosenp at gmail.com
Tue Mar 5 23:08:46 EST 2019
From: NeilBrown <neil at brown.name>
The current code acknowledged interrupts *after* polling.
This is the wrong way around, and could cause an interrupt to
be missed.
This is not likely to be fatal as another packet, and so another
interrupt, should come along soon. But maybe it is causing
problems, so let's fix it anyway.
Signed-off-by: NeilBrown <neil at brown.name>
Signed-off-by: Rosen Penev <rosenp at gmail.com>
---
.../drivers/net/ethernet/mediatek/mtk_eth_soc.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index e0bc0ab818..2e0c8f94ca 100644
--- a/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -876,6 +876,8 @@ static int fe_poll_rx(struct napi_struct *napi, int budget,
struct fe_rx_dma *rxd, trxd;
int done = 0, pad;
+ fe_reg_w32(rx_intr, FE_REG_FE_INT_STATUS);
+
if (netdev->features & NETIF_F_RXCSUM)
checksum_bit = soc->checksum_bit;
else
@@ -963,9 +965,6 @@ release_desc:
done++;
}
- if (done < budget)
- fe_reg_w32(rx_intr, FE_REG_FE_INT_STATUS);
-
return done;
}
@@ -981,6 +980,8 @@ static int fe_poll_tx(struct fe_priv *priv, int budget, u32 tx_intr,
u32 idx, hwidx;
struct fe_tx_ring *ring = &priv->tx_ring;
+ fe_reg_w32(tx_intr, FE_REG_FE_INT_STATUS);
+
idx = ring->tx_free_idx;
hwidx = fe_reg_r32(FE_REG_TX_DTX_IDX0);
@@ -1004,9 +1005,7 @@ static int fe_poll_tx(struct fe_priv *priv, int budget, u32 tx_intr,
if (idx == hwidx) {
/* read hw index again make sure no new tx packet */
hwidx = fe_reg_r32(FE_REG_TX_DTX_IDX0);
- if (idx == hwidx)
- fe_reg_w32(tx_intr, FE_REG_FE_INT_STATUS);
- else
+ if (idx != hwidx)
*tx_again = 1;
} else {
*tx_again = 1;
--
2.17.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list