[OpenWrt-Devel] [PATCH] mdadm: revised mdadm config & init logic
Rosen Penev
rosenp at gmail.com
Sat Mar 2 04:11:00 EST 2019
On Tue, Feb 26, 2019 at 6:05 PM Joseph Tingiris
<joseph.tingiris at gmail.com> wrote:
>
> This is a significant revision of /etc/init.d/mdadm. It adds new
> features, support for new configuration options, safer error
> handling, (configurable) verbose output, and contains multiple bug
> fixes.
>
> Most notably, mdadm was being started with the --config flag and
> that prevented it from using its built in Auto Assembly features.
> Users were required to put a correct uuid in /etc/config/mdadm.
>
> The new default startup mode is now to automatically assemble all
> RAID arrays attached to the machine using device scans, rather than
> configuation options.
>
> A new UCI section, config mdadm global, was added with new options that
> are supported by the accompanying /etc/init.d/mdadm. Documentation for all
> new (and previous) options was added as well. See the
> /etc/config/mdadmin or mdadm.init file itself for more details.
>
> Additionally, a new stateful 'auto' feature was added that functions
> similarly to the stateless Auto Assembly feature. The benefits of
> stateful auto assembly are to support features that mdadm 4.0 will only
> read from a configuration file, such as setting the MAILFROM value. The
> new mdadm_conf_auto() function will also aid users in troubleshooting.
> When verbose is turned on it provides tips and better visibility for what's
> actually happening.
>
> Backward compatibility was retained. Stateful UCI only configurations are
> supported. All previously existing configurations will work in this mode.
> However, these users will now have to explicitly turn it on.
>
> A new reload_service() function was added to prevent reloads from
> stopping mdadm. Reloads will now be ignored, though the stage is set for
> reloads to trigger scans for new devices. Explicit restarts still work as
> expected.
>
> The start_service() function was enhanced to query new UCI mdadm.global
> options: alert_program, config, email, email_from, monitor_frequency,
> and verbose. Each option is documented in /etc/mdadm/config (config.init) and
> some additional code comments were added.
>
> Finally, error handling and verbose output was enhanced. Users will
> know what's going on (if verbose is turned on).
>
> Strict reliance on a shell global ($CONF) was removed and replaced with a
> single global ($TMP_FILE) that's for development convenience. When/if a config
> file is not specified in the UCI config, it will fall back to using $TMP_FILE as the
> configuration file.
>
> Incremented PKG_RELEASE from 1 to 2
>
> Signed-off-by: Joseph Tingiris <joseph.tingiris at gmail.com>
Tested-by: Rosen Penev <rosenp at gmail.com>
> ---
> package/utils/mdadm/Makefile | 2 +-
> package/utils/mdadm/files/mdadm.config | 162 +++++++++-
> package/utils/mdadm/files/mdadm.init | 555 +++++++++++++++++++++++++++++----
> 3 files changed, 646 insertions(+), 73 deletions(-)
>
> diff --git a/package/utils/mdadm/Makefile b/package/utils/mdadm/Makefile
> index 18026bb..f20a58b 100644
> --- a/package/utils/mdadm/Makefile
> +++ b/package/utils/mdadm/Makefile
> @@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
>
> PKG_NAME:=mdadm
> PKG_VERSION:=4.1
> -PKG_RELEASE:=1
> +PKG_RELEASE:=2
>
> PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
> PKG_SOURCE_URL:=@KERNEL/linux/utils/raid/mdadm
> diff --git a/package/utils/mdadm/files/mdadm.config b/package/utils/mdadm/files/mdadm.config
> index 50afbc2..0c78c96 100644
> --- a/package/utils/mdadm/files/mdadm.config
> +++ b/package/utils/mdadm/files/mdadm.config
> @@ -1,18 +1,154 @@
> -config mdadm
> +#
> +# The mdadm 'global' section is for options that apply to all sections.
> +#
> +
> +config mdadm global
> +
> + #
> + # option 'alert_program' values may be a path to a valid, executable binary.
> + #
> + # The default 'alert_program' is not set.
> + #
> + # When mdadm detects an event it will execute this program with 3 arguments, see https://linux.die.net/man/8/mdadm
> + # $1 = will be the event
> + # $2 = will be the meta device
> + # $3 = may be a related component (if one exists)
> + #
> + # * alert_program runs independently from sendmail.
> + # * If both options alert_program and email are set, and both work, then an email and a
> + # custom alert will be generated.
> + # * no alert program is included in mdadm 4.0-4.
> + #
> + # Lots of possibilities exist, i.e. scripts for netdata, slack, etc.
> + #
> + #option alert_program /usr/sbin/mdadm_alerts
> +
> +
> + #
> + # option 'config' values may be one of the following.
> + #
> + # The default 'config' is none (stateless auto assembly).
> + #
> + # auto - stateful, dynamically generated mdadm.conf via block info,
> + # stored in /var/etc/mdadm.conf
> + # containers - stateless, mdadm --assemble --scan --config=containers; see https://linux.die.net/man/8/mdadm
> + # none - stateless, mdadm --assemble --scan --config=none; aka 'Auto Assembly',
> + # see https://linux.die.net/man/8/mdadm
> + # partition - stateless, mdadm --assemble --scan --config=partition; see https://linux.die.net/man/8/mdadm
> + # uci - stateful, dynamically generated mdadm.conf via uci array values (below),
> + # stored in /var/etc/mdadm.conf
> + # file - stateful, manually generated mdadm.conf file(s),
> + # 'file' must be preceded by a / and may be a readable filename
> + # or directory with multiple .conf files
> + #
> + # Try uncommenting this and using 'auto' if there are issues. It provides more comprehensive
> + # diagnostics via verbose messages & the ability to set an email from address.
> + #
> + #option config auto
> +
> +
> + #
> + # option 'email' values may be a valid (to) email address, or empty.
> + #
> + # The default 'email' to send to is root (monitor email will be sent to the local root user).
> + #
> + # * Sending mail will only work if /usr/lib/sendmail or /usr/sbin/sendmail is available. Install postfix.
> + # * Comment, or unset, the email value causes mail to be disabled. With no email value, mdadm wont even try.
> + # * A single word name must be a valid user on the system, or it will bounce back to root.
> + # Unless user 'mdadm' exists (it doesn't by default), this will bounce:
> + # option email mdadm
> + # * A full email address does not need quoting and will deliver if tcp port 25 (SMTP) is allowed outbound, i.e.
> + # option email joseph.tingiris at gmail.com
> + # * mdadm only supports one email address (MAILADDR) for all arrays. see mdadm.conf(5)
> + #
> + # mail will be to 'root@$HOSTNAME', i.e. root at OpenWrt
> + #
> option email root
> - # list devices /dev/hd*
> - # list devices /dev/sd*
> - # list devices partitions
>
> -config array
> - option uuid 52c5c44a:d2162820:f75d3464:799750f8
> - option device /dev/md0
> - # option name raid:0
> - # option super_minor 0
> - # list devices /dev/sda1
> - # list devices /dev/sdb1
> - # option spares 0
> - # option spare_group spares
> +
> + #
> + # option 'email_from' values may be a valid (from) email address, or empty.
> + #
> + # The default 'email_from' is 'OpenWrt RAID Monitoring <mdadm@$HOSTNAME>', i.e. mdadm at OpenWrt
> + #
> + # * Sending mail will only work if /usr/lib/sendmail or /usr/sbin/sendmail is available. Install postfix.
> + # * Comment, or unset, the email_from value causes mdadm to send mail from
> + # root@$HOSTNAME, e.g. root at OpenWrt
> + # * A complete from envelope can be specified within quotes, i.e.
> + # option email_from 'mdadm monitoring <this_is_not_spam at example.com>'
> + # * mdadm only supports setting a from address (MAILFROM) with a stateful config,
> + # e.g. 'auto' or 'uci'. see mdadm.conf(5)
> + #
> + # mail will be from 'OpenWrt RAID Monitoring <mdadm@$HOSTNAME>', i.e. mdadm at OpenWrt
> + #
> + option email_from 'OpenWrt RAID Monitoring <mdadm>'
> +
> +
> + #
> + # option 'monitor_frequency' values may be a valid integer, or empty.
> + #
> + # The default monitor frequency (delayed poll) is 120 seconds.
> + #
> + # * This is the polling interval, frequency, or delay. It's the value for mdadm --delay. see https://linux.die.net/man/8/mdadm
> + #
> + option monitor_frequency 300
> +
> + #
> + # option 'verbose' values may be '1', 'on', or 'true', everything else is false.
> + #
> + # The default verbosity is false (quiet).
> + #
> + # * Standard errors will be sent to console and syslog regardless of this setting.
> + # * When verbose is false mdadm will run in --quiet mode and generate very little log
> + # or standard output.
> + #
> + # Turn this on if you're having problems, or want more detail. With SSH_TTY set output will
> + # be to that TTY, otherwise it will go to syslog via logger.
> + #
> + #option verbose on
> +
> +
> +#
> +# The mdadm 'array' section(s) are for stateful, manual configurations. Experts only. Use with caution.
> +#
> +#
> +# The use of multiple 'array' sections is supported by /etc/init.d/mdadm.
> +# They must all be named 'array'.
> +#
> +# As of this writing unnamed 'mdadm' sections are still allowed, but deprecated. Do not use.
> +#
> +
> +#config array
> + #
> + # example 'array' options may be a valid mix of:
> + #
> + # bitmap
> + # container
> + # device
> + # devices
> + # member
> + # name
> + # spare_group
> + # spares
> + # super_minor
> + # uuid
> + #
> # option bitmap /bitmap.md
> # option container 00000000:00000000:00000000:00000000
> + # option device /dev/md0
> + # -and/or a devices list-
> + # list devices /dev/hd* # mdadm allows glob, see glob(7)
> + # list devices /dev/sd*
> + # list devices /dev/sda1
> + # list devices /dev/sdb1
> + # list devices containers
> + # list devices partitions
> # option member 1
> + # option name raid:0
> + # option spare_group spares
> + # option spares 0
> + # option super_minor 0
> + # use uuid from block info (preferred), or mdadm --misc --detail /dev/md0
> + # option uuid 2084de11-70c4-4521-8f95-6113e75f1fe9
> + #
> + # These options directly translate to mdadm -- options, see https://linux.die.net/man/8/mdadm
> diff --git a/package/utils/mdadm/files/mdadm.init b/package/utils/mdadm/files/mdadm.init
> index 64a50b3..39b21e5 100644
> --- a/package/utils/mdadm/files/mdadm.init
> +++ b/package/utils/mdadm/files/mdadm.init
> @@ -1,93 +1,530 @@
> #!/bin/sh /etc/rc.common
>
> -START=13
> -STOP=98
> +START=12
> +STOP=99
>
> USE_PROCD=1
> PROG=/sbin/mdadm
> NAME=mdadm
>
> -CONF="/var/etc/mdadm.conf"
> +LOGGER=0 # off
> +VERBOSE=1 # off
> +
> +TMP_FILE="/var/etc/mdadm.conf" # /var/etc is on /tmp; used for temporary state, to enable stateful only mdadm features
> +
> +[ ! -x "$PROG" ] && exit 1
>
> append_list_item() {
> - append "$2" "$1" "$3"
> + append "$2" "$1" "$3"
> }
>
> append_option() {
> - local var="$1"
> - local cfg="$2"
> - local opt="$3"
> - local name="$4"
> - local sep="$5"
> - local str
> -
> - if [ -n "$sep" ]; then
> - config_list_foreach "$cfg" "$opt" append_list_item str "$sep"
> - else
> - config_get str "$cfg" "$opt"
> - fi
> -
> - [ -n "$str" ] && append "$var" $(printf "%s=%s" "${name:-${opt//_/-}}" "$str")
> + local var="$1"
> + local cfg="$2"
> + local opt="$3"
> + local name="$4"
> + local sep="$5"
> + local str
> +
> + if [ -n "$sep" ]; then
> + config_list_foreach "$cfg" "$opt" append_list_item str "$sep"
> + else
> + config_get str "$cfg" "$opt"
> + fi
> +
> + [ -n "$str" ] && append "$var" $(printf "%s=%s" "${name:-${opt//_/-}}" "$str")
> }
>
> -mdadm_common() {
> - local cfg="$1"
> - local email devices
> +verbose() {
> + local msg="$1"
> + local level="$2"
>
> - if [ -x /usr/sbin/sendmail ]; then
> - config_get email "$cfg" email
> - [ -n "$email" ] && printf "MAILADDR %s\n" "$email" >> $CONF
> - fi
> + [ -z "$level" ] && level="INFO"
>
> - config_list_foreach "$cfg" devices append_list_item devices " "
> - [ -n "$devices" ] && printf "DEVICE %s\n" "$devices" >> $CONF
> + if [ "$VERBOSE" == "1" ]; then
> + if [ ${#SSH_TTY} -gt 0 ]; then
> + printf "$NAME: init %7s - %b\n" "$level" "$msg"
> + else
> + # no SSH_TTY goes to logger
> + printf "$NAME: init %7s - %b\n" "$level" "$msg" | logger -t mdadm
> + fi
> + fi
> }
>
> -mdadm_array() {
> - local cfg="$1"
> - local uuid device devices name array
> +mdadm_conf_auto() {
> + local mdadm_conf="$1"
> +
> + if [ ! -w "$mdadm_conf" ]; then
> + if [ -z "$mdadm_conf" ]; then
> + verbose "mdadm_conf value is empty" ERROR
> + else
> + verbose "'$mdadm_conf' file not found writable" ERROR
> + fi
> + return 1
> + fi
> +
> + local block_md block_uuid mdadm_md mdadm_md_rc mdadm_uuid
> +
> + # Check block info for active linux_raid_members, if necessary then compare with mdadm, & dynamically update $mdadm_conf
> +
> + block_md=0 # counter
> + for block_uuid in $(block info 2> /dev/null | sed -nEe 's#^.* UUID="([^"]*)".*TYPE="linux_raid_member"#\1#p'); do
> + mdadm_md=""
> + mdadm_md_rc=0
> +
> + while [ -z "$mdadm_md" ]; do
> + if [ -b "/dev/md$block_md" ]; then
> + # handle mdadm restart, service reload, multiple starts without stops, physical unplug, etc.
> +
> + verbose "/dev/md$block_md block device already exists" NOTICE
>
> - config_get uuid "$cfg" uuid
> - config_get name "$cfg" name
> - config_get device "$cfg" device
> + # active arrays will promptly respond; first check
> + mdadm_uuid=$($PROG --detail --test --brief "/dev/md$block_md" 2> /dev/null | sed -nEe '1s#^.*UUID=((.){35})#\1#p')
>
> - if [ -z "$device" ] || [ -z "$uuid$name" ]; then
> - echo "Skipping array without device, uuid or name" >&2
> - return
> - fi
> + if [ -z "$mdadm_uuid" ]; then
> + # When an array is unplugged and then plugged in again (without rebooting) then it becomes an INACTIVE-ARRAY
> + # however the device file persists, e.g. /dev/md0, and should be reused, rather than a new device assigned.
> + if $PROG --detail --test --scan "/dev/md$block_md" 2> /dev/null | grep -E "^(INACTIVE-ARRAY(\ |\t)(.*)/dev/md(|/)$block_md(\ |\t)metadata)" &> /dev/null; then
> + verbose "attempting to revive INACTIVE-ARRAY on /dev/md$block_md" NOTICE
> + $PROG --examine --scan 2> /dev/null | egrep -qE "^(ARRAY(\ |\t)(.*)/dev/md(|/)$block_md(\ |\t))"
> + if [ $? -eq 0 ]; then
> + # this is relatively safe with the above regex validation
> + mdadm_md="/dev/md$block_md"
> + fi
> + else
> + # This is an unsafe condition to handle with a shell, mdadm sees an inactive device with a different /dev.
> + # Err to the side of caution;--assemble --scan shoud know what to do ... it will abandon the block device.
> + # If these are happening, suggest stateless & sacrifice some minor functionality, e.g. MAILFROM
> + # May be an mdadm or kernel bug with this hardware setup.
> + verbose "bug? unsafe to revive INACTIVE-ARRAY on /dev/md$block_md" WARNING
> + let block_md=$block_md+1
> + continue
> + fi
> + fi
>
> - [ -n "$uuid" ] && append array "uuid=$uuid"
> - [ -n "$name" ] && append array "name=$name"
> + if [ "${block_uuid//-/}" == "${mdadm_uuid//:/}" ]; then
> + # block info & mdadm concur all's well; the meta device is active; reuse
> + mdadm_md="/dev/md$block_md"
> + verbose "auto conf found active RAID member block_uuid=$block_uuid and will reused device '$mdadm_md'" OK
> + else
> + if [ ! -e "/dev/md$block_md" ]; then
> + # this block device was never assembled previously; new
> + mdadm_md="/dev/md$block_md"
> + verbose "auto conf found new RAID member block_uuid=$block_uuid and will assign device '$mdadm_md'" OK
> + else
> + let block_md=$block_md+1
> + continue
> + fi
> + fi
>
> - append_option array "$cfg" super_minor
> - append_option array "$cfg" spares
> - append_option array "$cfg" spare_group
> - append_option array "$cfg" bitmap
> - append_option array "$cfg" container
> - append_option array "$cfg" member
> - append_option array "$cfg" devices devices ","
> + else
> + if [ ! -e "/dev/md$block_md" ]; then
> + # best scenario; no device or file (yet), safest
> + mdadm_md="/dev/md$block_md"
> + verbose "auto conf found missing RAID member block_uuid=$block_uuid and will assign device '$mdadm_md'" OK
> + else
> + # a file exists, but it's not a block device? It's possible (touch), albeit a corner case; discretely say
> + # we know & pass over it.
> + verbose "/dev/md$block_md file found, not a block device" WARNING
> + let block_md=$block_md+1
> + continue
> + fi
> + fi
>
> - printf "ARRAY %s %s\n" "$device" "$array" >> $CONF
> + $PROG --detail --test --brief $mdadm_md &> /dev/null # rc 1=ok, 1=degrade, 2=dead, 4=missing
> + mdadm_md_rc=$?
> +
> + # todo: annouce degraded arrays in the logs? mdadmin monitor will do it but not on demand, only per frequency.
> + # nice to have for hot plugs ...
> +
> + verbose "block_md=$block_md, block_uuid=$block_uuid, mdadm_md=$mdadm_md, mdadm_uuid=$mdadm_uuid, rc=$mdadm_md_rc" INFO
> +
> + if [ $mdadm_md_rc -lt 4 ]; then
> + $PROG --detail --test --brief $mdadm_md 2> /dev/null >> $mdadm_conf
> + else
> + # there's a device with no header. maybe it's to replace a failed device ...
> + echo "ARRAY $mdadm_md uuid=$block_uuid" >> $mdadm_conf
> + fi
> +
> + done
> +
> + done
> +
> + if [ -n "$mdadm_md" ]; then
> + return 0
> + else
> + return 1
> + fi
> +}
> +
> +mdadm_conf_uci() {
> + local cfg="$1"
> + local mdadm_conf="$2"
> +
> + if [ -z "$cfg" ]; then
> + verbose "cfg is empty" WARNING
> + return 1
> + fi
> +
> + local cfg_name=$(uci_get mdadm.$cfg 2> /dev/null)
> +
> + if [ -z "$cfg_name" ]; then
> + verbose "($cfg) mdadm config name is empty" NOTICE
> + fi
> +
> + if [ -z "$mdadm_conf" ]; then
> + verbose "($cfg) skipping mdadm.$cfg_name array; config file is empty" WARNING
> + return 1
> + fi
> +
> + if ! touch "$mdadm_conf" 2> /dev/null; then
> + verbose "($cfg) skipping mdadm.$cfg_name array; can't touch '$mdadm_conf'" ERROR
> + return 1
> + fi
> +
> + local array device devices name uuid
> +
> + config_get name "$cfg" name
> + config_get device "$cfg" device
> + config_get uuid "$cfg" uuid
> +
> + config_list_foreach "$cfg" devices append_list_item devices " "
> + [ -n "$devices" ] && printf "DEVICE %s\n" "$devices" >> $mdadm_conf
> +
> + if [ -z "$device" ] || [ -z "$uuid$name" ]; then
> + verbose "($cfg) skipping mdadm.$cfg_name array; no device, uuid, or name" WARNING
> + return 1
> + fi
> +
> + [ -n "$uuid" ] && append array "uuid=$uuid"
> + [ -n "$name" ] && append array "name=$name"
> +
> + append_option array "$cfg" super_minor
> + append_option array "$cfg" spares
> + append_option array "$cfg" spare_group
> + append_option array "$cfg" bitmap
> + append_option array "$cfg" container
> + append_option array "$cfg" member
> + append_option array "$cfg" devices devices ","
> +
> + printf "ARRAY %s %s\n" "$device" "$array" >> $mdadm_conf
> +}
> +
> +reload_service() {
> + while read line; do echo $line; done <<< "$(echo hello; echo world)"
> + # running start_service() on reload should be OK in all modes, except manual configs.
> + # for auto & none, start_service() already rescans for hotplugged devices, add new arrays, etc.
> + # could check for the configured mode & call appropriately? doing nothing is safer; todo: test & resolve
> + verbose "reload_service called, ignoring" NOTICE
> + return 0
> }
>
> start_service() {
> - local email
> + local config config_detail config_file config_level config_mode config_rc config_state config_verbose mdadm_conf
> +
> + # mdadm.global specific locals
> + local alert_program email email_from mail_program mdadm_args monitor_frequency
> +
> + config_verbose=$(uci_get mdadm.global.verbose 2> /dev/null | awk '{print tolower($1)}')
> + if [ "$config_verbose" == "1" ] || [ "$config_verbose" == "on" ] || [ "$config_verbose" == "true" ]; then
> + VERBOSE=1 # turn verbose on globally
> + config_verbose=1
> + mdadm_args="--verbose"
> + else
> + unset -v config_verbose
> + mdadm_args="--quiet"
> + fi
> +
> + verbose "start_service $@" INFO
> +
> + config_rc=0
> + config_detail="start"
> + config_level="INFO"
> + config_mode="service"
> +
> + config=$(uci_get mdadm.global.config 2> /dev/null)
> + if [ -z "$config" ]; then
> + # per PR1713 discussion; this works very well for the majority of use cases; let mdadm do the heavy lifting.
> + # none is (Auto Assemble; or no --config); see mdadm(8), default
> + config='none'
> + config_detail="mdadm.global.config value is empty"
> + config_state='stateless'
> + config_mode="default"
> + config_level='OK'
> + else
> + # experts only
>
> - mkdir -p "${CONF%/*}"
> - printf "# Autogenerated from /etc/config/mdadm, do not edit!\n" > $CONF
> + config_mode="manual"
>
> - config_load mdadm
> - config_foreach mdadm_common mdadm
> - config_foreach mdadm_array array
> + # check file values first, to preserve case of file name values
> + if [ "${config:0:1}" == "/" ]; then
> + config_state='stateful' # all types of file configs are stateful
>
> - $PROG --assemble --scan --config="$CONF"
> + if [ -d "$config" ] && [ -r "$config" ]; then
> + local config_file_count=0
> + for config_file in ${config}/*.conf; do
> + if [ -r "$config_file" ]; then
> + let config_file_count=$config_file_count+1
> + fi
> + done
> + if [ $config_file_count -eq 0 ]; then
> + config_level="WARNING"
> + else
> + config_level="OK"
> + fi
> + config_detail="directory found with $config_file_count readable .conf files"
> + else
> + if [ -w "$config" ]; then
> + if [ -s "$config" ]; then
> + # regardless, this will rely on mdadm for final validation; for informational purposes ...
> + grep -E '^((DEVICE){1}(\ |\t)(.*)(/dev/|containers|partitions))' "$config" &> /dev/null # pattern per mdadm(8)
> + if [ $? -eq 0 ]; then
> + config_detail="file found, readable with a ^DEVICE"
> + config_level="OK"
> + else
> + config_detail="file found, readable without a ^DEVICE"
> + config_level="WARNING"
> + fi
> + else
> + config_detail="file found, writable and empty"
> + config_level="OK"
> + fi
> + else
> + config_detail="file not found, unwritable"
> + config_level="FATAL"
> + config_rc=1
> + fi
> + fi
> + else
> + config_mode="dynamic"
>
> - procd_open_instance
> - procd_set_param command "$PROG" --monitor --syslog --scan --config="$CONF"
> - procd_close_instance
> + # allow static values in mixed case; convert to lower
> + config="$(awk -v config="$config" 'BEGIN{print tolower(config)}')"
> + if [ "$config" == "containers" ] || [ "$config" == "none" ] || [ "$config" == "partition" ]; then
> + # pass through to mdadm --config=
> + config_detail="dynamic; uci static key value"
> + config_level="OK"
> + config_state='stateless'
> + else
> + if [ "$config" == "auto" ] || [ "$config" == "uci" ]; then
> + config_detail="dynamic; $config config"
> + config_level="OK"
> + config_state='stateful'
> + mdadm_conf="$TMP_FILE"
> + else
> + config_detail="invalid; unsupported uci config key value"
> + config_level="FATAL"
> + config_state='stateful'
> + config_rc=1
> + fi
> + fi
> + fi
> + fi
> +
> + # final safety & functional checks
> +
> + # check for fatality
> + if [ -z "$config" ]; then
> + config="${config}?"
> + config_detail="$config_detail (sorry, something went wrong; check the config settings)"
> + config_level="FATAL"
> + config_mode="${config_mode}?"
> + config_state="${config_state}?"
> + config_rc=1
> + fi
> +
> + # Prefer mdadm.global.email; only one is allowed and can be an --email argument per mdadm.conf(5)
> + email=$(uci_get mdadm.global.email 2> /dev/null)
> +
> + # mdadm (or postfix?) bug; workaround. mdadm 4.0 for 18.06.1 has a compiled in default of '/usr/lib/sendmail -t'.
> + # There's no configurable way to change it and mdadm must be recompiled differently for Openwrt, or posfix should
> + # add the link. In 18.06.1, postfix 3.3.0-1 installs sendmail in /usr/sbin; mdadm complains & no mail is delivered.
> + # Other distro's postfix pkg typically installs this link ... or one in /etc/alternatives.
> + # Since mdadm needs it, I'm adding it here to be sure mdadm can send email if there's a /usr/sbin/sendmail.
> +
> + # There's really no point in making mdadm's compiled in sendmail configurable via uci.
> + mail_program="/usr/lib/sendmail"
> + if [ -x /usr/sbin/sendmail ] && [ ! -e "$mail_program" ]; then
> + # a sym link will suffice
> + ln -s /usr/sbin/sendmail "$mail_program"
> + if [ $? -ne 0 ]; then
> + verbose "ln -s /usr/bin/sendmail /usr/lib/sendmail failed" WARNING
> + fi
> + fi
> +
> + if [ ! -x "$mail_program" ]; then
> + verbose "disabling email; mail program '/usr/lib/sendmail' not found executable (install postfix)" WARNING
> + email=""
> + fi
> +
> + if [ "$config_state" == "stateful" ] && [ -n "$mdadm_conf" ]; then
> + if mkdir -p "${mdadm_conf%/*}" &> /dev/null; then
> + printf "# Autogenerated from /etc/init.d/mdadm, do not edit!\n" > $mdadm_conf
> +
> + # Use mdadm.global.email_from only if there's a valid mta; only one is allowed per mdadm.conf(5)
> + # todo: see what other mtas Openwrt has in their opkg repos & maybe support others
> + if [ -x "$mail_program" ]; then
> + email_from=$(uci_get mdadm.global.email_from 2> /dev/null)
> + fi
> +
> + if [ "$config" == "auto" ]; then
> + # stateful mdadm.conf auto configuration
> + if ! mdadm_conf_auto "$mdadm_conf"; then
> + #there's quite a bit of logic & error handling in mdadm_conf_auto; if it doesn't return 0 then it's a fatality
> + config_detail="$config_detail (couldn't find any meta devices; check connections, or try stateless autoconfig)"
> + config_level="FATAL"
> + config_rc=1
> + fi
> + else
> + # stateful mdadm.conf uci configuration
> +
> + # load uci config from /etc/config/mdadm
> + config_load mdadm
> +
> + # This is how mdadm uci mdadm config sections should be named, like fstab does with 'mount'.
> + # The included uci /etc/config/mdadm provides more documentation & direction.
> + config_foreach mdadm_conf_uci array "$mdadm_conf"
> +
> + # The unlabled mdadm. at mdadm[0] section should be (is now) deprecated.
> + # It's more difficult to document how to use, redundant, and over complicated this init configuration.
> +
> + # Confused; originally config_foreach?
> + # It's possible to specify multiple mdadm sections with array options in all sections.
> + # Thus multiple option emails which could result in multiple MAILADDR being appended to mdadm.conf.
> + # That confuses mdadm.
> +
> + # The following code is here to prevent regressions.
> +
> + config_foreach mdadm_conf_uci mdadm "$mdadm_conf"
> +
> + # For backward compatibility; this will allow an mdadm. at mdadm[0] section's option email.
> + # (only if mdadm.global.email is not set; again, prefer mdadm.global.email)
> + #
> + # bug fixed. The first legacy mdadm section option email will be used.
> + # a better fix would be to *only* support array sections.
> + #
> + [ -z "$email" ] && [ -x "$mail_program" ] && email=$(uci_get mdadm. at mdadm[0].email 2> /dev/null)
> + # email_from is a new feature; was not previously handled; no need to and please don't backport
> +
> + fi
> +
> + # This is nice feature to have to get mdadm mails through spam filters, etc.
> + # Too bad mdadm (4.0) doesn't have an argument for it.
> + # Maybe mdadm 4.1 will ... todo: revisit when making mdadm 4.1 & it's in Openwrt mainline.
> + # This tests successfully with the postfix workaround above & mdadm 4.0.
> + if [ -x "$mail_program" ]; then
> + printf "MAILFROM %s\n" "$email_from" >> $mdadm_conf # only supported via stateful configs; see mdadm.conf(5)
> + fi
> +
> + if [ -n "$config_verbose" ] && [ -r "$mdadm_conf" ]; then
> + verbose "mdadm_conf = $mdadm_conf (config_verbose=$config_verbose)" INFO
> + verbose "---cut $mdadm_conf cut---" INFO
> + while read line; do
> + verbose "$line" INFO
> + done < "$mdadm_conf"
> + unset -v line
> + verbose "---cut $mdadm_conf cut---" INFO
> + fi
> +
> + else
> + config_detail="$config_detail (mkdir failed; check permissions)"
> + config_level="FATAL"
> + config_rc=1
> + fi
> + fi
> +
> + if [ $config_rc -ne 0 ]; then
> + # FATAL
> + verbose "$config_state,$config_mode config='$config', $config_detail" "$config_level" INFO
> + [ -n "$mdadm_conf" ] && [ -w "$mdadm_conf" ] && rm -f "$mdadm_conf"
> + exit $config_rc
> + fi
> +
> + # Good to go, no more fatal exits, finish getting global & setting local values ... they're all optional.
> +
> + mdadm_args="$mdadm_args --scan"
> +
> + if [ -n "$mdadm_conf" ]; then
> + # mdadm.global.config </file>
> + mdadm_args="$mdadm_args --config=$mdadm_conf"
> + else
> + # mdadm.global.config all (containers, partitions, etc), except none
> + [ -n "$config" ] && [ "$config" != 'none' ] && mdadm_args="$mdadm_args --config=$config"
> + fi
> +
> + local assemble_count assemble_rc
> +
> + assemble_count=$($PROG --detail --brief --scan 2> /dev/null | wc -l)
> + verbose "$assemble_count arrays are currently assembled" INFO
> +
> + # setup assembly mode
> +
> + verbose "(assemble) '$PROG --assemble $mdadm_args'" INFO
> + $PROG --assemble $mdadm_args &> /dev/null
> + assemble_rc=$?
> +
> + if [ $assemble_rc -eq 0 ]; then
> + verbose "all arrays assembled successfully" OK
> + if [ -n "$config_verbose" ]; then
> + >/var/log/mdadm.detail
> + local assemble_dev assemble_devs=$($PROG --detail --brief --scan | awk '{print $2}')
> + for assemble_dev in $assemble_devs; do
> + printf "\n" >> /var/log/mdadm.detail
> + $PROG --verbose --detail $assemble_dev >> /var/log/mdadm.detail
> + printf "\n" >> /var/log/mdadm.detail
> + done
> + unset -v assemble_dev
> + while read line; do
> + verbose "$line" INFO
> + done < "/var/log/mdadm.detail"
> + unset -v line
> + fi
> + else
> + if [ $assemble_count -eq 0 ]; then
> + verbose "no arrays assembled successfully" ERROR
> + else
> + verbose "no new arrays need assembly" NOTICE
> + fi
> + fi
> +
> + # setup monitor mode
> +
> + alert_program=$(uci_get mdadm.global.alert_program 2> /dev/null)
> + if [ -n "$alert_program" ]; then
> + if [ -x "$alert_program" ]; then
> + mdadm_args="$mdadm_args --alert=$alert_program"
> + else
> + verbose "disabling alerts; alert_progam '$alert_program' not found executable" WARNING
> + fi
> + fi
> +
> + [ -n "$email" ] && mdadm_args="$mdadm_args --mail=$email"
> +
> + monitor_frequency=$(uci_get mdadm.global.monitor_frequency 2> /dev/null | sed -e 's/[^0-9]*//g')
> + if [ -n "$monitor_frequency" ]; then
> + mdadm_args="$mdadm_args --delay=$monitor_frequency"
> + verbose "setting monitor frequency to '$monitor_frequency' seconds"
> + fi
> +
> + verbose "(monitor) '$PROG --monitor --syslog $mdadm_args'" INFO
> +
> + # /etc/rc.common doesn't like valid sh constructs like while read line; do echo $line; done <<< "$(echo hello; echo world)" # 8|
> + # Taking the time machine back to sh is rough enough as it is ... I need to better understand its purpose. I spent too much time
> + # in /lib/functions. It's all circa 2006-2013. Yikes. Where's the man pages? Or even code comments? It would've been way
> + # easier just to do *everything* the good ol' sysvinit fashioned way, or use systemd. Just a gripe, I really do like OpenWrt.
> + procd_open_instance
> + procd_set_param command "$PROG" --monitor --syslog $mdadm_args
> + procd_close_instance
> +
> + verbose "$config_state,$config_mode config=$config, $config_detail complete" "$config_level"
> }
>
> stop_service() {
> - $PROG --stop --scan
> + $PROG --stop --scan
> + echo "here VERBOSE=$VERBOSE"
> + if [ $? -eq 0 ]; then
> + verbose "'$PROG --stop --scan' stop_service succeeded" OK
> + else
> + verbose "'$PROG --stop --scan' stop_service failed" ERROR
> + fi
> }
> -
> --
> 1.8.3.1
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list