[OpenWrt-Devel] [PATCH 1/2] ath79: Add GL.iNet AR-300M-Lite
Jeff Kletsky
lede at allycomm.com
Fri Mar 1 15:20:40 EST 2019
Update of patch based on feedback that the variants
have different colors for the LEDs. Confirmed with
OEM that they are not all green, in contrast to the
presently mach file in OEM's source.
This patch is now self-contained.
Patch [2/2] in this series should be withdrawn.
See also https://patchwork.ozlabs.org/patch/1049396/
Jeff Kletsky
From 5536569e7cf589d3c64e1405937c56c931f30eaa Mon Sep 17 00:00:00 2001
From: Jeff Kletsky <git-commits at allycomm.com>
Date: Wed, 16 Jan 2019 12:32:15 -0800
Subject: [PATCH] ath79: Add GL.iNet AR300M-Lite
AR300M-Lite is single-Ethernet variant of the AR300M series
Its eth0 would otherwise be assigned to the WAN interface
making it unreachable firstboot or failsafe.
Installation instructions from OEM (OpenWrt variant):
* Install sysupgrade.bin using OEM's "Advanced" GUI (LuCI),
* Do not preserve settings
* Access rebooted device via Ethernet at OpenWrt default address
Runtime-tested: GL.iNet AR300M-Lite
Signed-off-by: Jeff Kletsky <git-commits at allycomm.com>
---
.../linux/ath79/base-files/etc/board.d/02_network | 1 +
.../ath79/dts/qca9531_glinet_gl-ar300m-lite.dts | 22 +++++++++
.../ath79/dts/qca9531_glinet_gl-ar300m-nand.dts | 34 -------------
.../ath79/dts/qca9531_glinet_gl-ar300m-nor.dts | 39 ---------------
.../linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi | 57
+++++++++++++++++++---
target/linux/ath79/image/generic.mk | 14 +++++-
6 files changed, 84 insertions(+), 83 deletions(-)
create mode 100644
target/linux/ath79/dts/qca9531_glinet_gl-ar300m-lite.dts
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network
b/target/linux/ath79/base-files/etc/board.d/02_network
index f1171695bd..a275af0e9e 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -13,6 +13,7 @@ ath79_setup_interfaces()
devolo,dvl1200i|\
devolo,dvl1750c|\
devolo,dvl1750i|\
+ glinet,ar300m-lite|\
ocedo,koala|\
ocedo,raccoon|\
pcs,cap324|\
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-lite.dts
b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-lite.dts
new file mode 100644
index 0000000000..fba08e4295
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-lite.dts
@@ -0,0 +1,22 @@
+/dts-v1/;
+
+#include "qca9531_glinet_gl-ar300m-nor.dts"
+
+/ {
+ compatible = "glinet,gl-ar300m-lite", "qca,qca9531";
+ model = "GL.iNet GL-AR300M-Lite";
+};
+
+// GL-AR300M-Lite has different LED colors than the non-Lite version
+
+&led_status {
+ label = "gl-ar300m-lite:red:status";
+};
+
+&led_lan {
+ label = "gl-ar300m-lite:green:lan";
+};
+
+&led_wlan {
+ label = "gl-ar300m-lite:green:wlan";
+};
\ No newline at end of file
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts
b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts
index 9e78f83a76..26c30f2b72 100644
--- a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts
+++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts
@@ -8,42 +8,8 @@
};
&spi {
- status = "okay";
num-cs = <1>;
- flash at 0 {
- compatible = "winbond,w25q128", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition at 1 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- partition at 2 {
- label = "reserved";
- reg = <0x050000 0xfa0000>;
- };
-
- art: partition at 3 {
- label = "art";
- reg = <0xff0000 0x010000>;
- };
- };
- };
-
flash at 1 {
compatible = "spinand,mt29f";
reg = <1>;
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts
b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts
index 6b77af0401..02196cf9c4 100644
--- a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts
+++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts
@@ -9,42 +9,3 @@
compatible = "glinet,gl-ar300m-nor", "qca,qca9531";
model = "GL.iNet GL-AR300M (NOR)";
};
-
-&spi {
- status = "okay";
- num-cs = <0>;
-
- flash at 0 {
- compatible = "winbond,w25q128", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition at 1 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- partition at 2 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x050000 0xfa0000>;
- };
-
- art: partition at 3 {
- label = "art";
- reg = <0xff0000 0x010000>;
- };
- };
- };
-};
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi
b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi
index 55002b44e3..405fae98d9 100644
--- a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi
+++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi
@@ -41,20 +41,22 @@
leds {
compatible = "gpio-leds";
- wlan {
- label = "gl-ar300m:green:wlan";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
+ // Colors from non-Lite versions
+
+ led_status: status {
+ label = "gl-ar300m:green:status";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
- lan {
+ led_lan: lan {
label = "gl-ar300m:green:lan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
- led_status: status {
- label = "gl-ar300m:red:status";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ led_wlan: wlan {
+ label = "gl-ar300m:red:wlan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
};
};
};
@@ -63,6 +65,45 @@
status = "okay";
};
+&spi {
+ status = "okay";
+ num-cs = <0>;
+
+ flash at 0 {
+ compatible = "winbond,w25q128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition at 1 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition at 2 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition at 3 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ };
+ };
+ };
+};
+
&uart {
status = "okay";
};
diff --git a/target/linux/ath79/image/generic.mk
b/target/linux/ath79/image/generic.mk
index fa504ee0fc..b83c5ecc55 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -313,13 +313,23 @@ define Device/glinet_gl-ar150
endef
TARGET_DEVICES += glinet_gl-ar150
-define Device/glinet_gl-ar300m-nor
+define Device/glinet_gl-ar300m-common-nor
ATH_SOC := qca9531
- DEVICE_TITLE := GL.iNet GL-AR300M
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
IMAGE_SIZE := 16000k
SUPPORTED_DEVICES += gl-ar300m
endef
+
+define Device/glinet_gl-ar300m-lite
+ $(Device/glinet_gl-ar300m-common-nor)
+ DEVICE_TITLE := GL.iNet GL-AR300M-Lite
+endef
+TARGET_DEVICES += glinet_gl-ar300m-lite
+
+define Device/glinet_gl-ar300m-nor
+ $(Device/glinet_gl-ar300m-common-nor)
+ DEVICE_TITLE := GL.iNet GL-AR300M
+endef
TARGET_DEVICES += glinet_gl-ar300m-nor
define Device/glinet_gl-ar750s
--
2.11.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list