[OpenWrt-Devel] [PATCH v3 2/3] network/config: add xfrm interface support scripts

[André Valentin]

This package adds scripts for xfrm interfaces support.
Example configuration via /etc/config/network:

config interface 'xfrm0'
        option proto 'xfrm'
        option mtu '1300'
        option zone 'VPN'
        option tunlink 'wan'
        option ifid 30

config interface 'xfrm0_static'
        option proto 'static'
        option ifname '@xfrm0'
        option ip6addr 'fe80::1/64'
        option ipaddr '10.0.0.1/30'

Now set in strongswan IPsec policy:
 	if_id_in = 30
	if_id_out = 30
---
 package/network/config/xfrm/Makefile      | 38 ++++++++++++++++++
 package/network/config/xfrm/files/xfrm.sh | 65 +++++++++++++++++++++++++++++++
 2 files changed, 103 insertions(+)
 create mode 100644 package/network/config/xfrm/Makefile
 create mode 100755 package/network/config/xfrm/files/xfrm.sh

diff --git a/package/network/config/xfrm/Makefile b/package/network/config/xfrm/Makefile
new file mode 100644
index 0000000000..efc90cf318
--- /dev/null
+++ b/package/network/config/xfrm/Makefile
@@ -0,0 +1,38 @@
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=xfrm
+PKG_VERSION:=1
+PKG_RELEASE:=1
+PKG_LICENSE:=GPL-2.0
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/xfrm/Default
+  SECTION:=net
+  CATEGORY:=Network
+  MAINTAINER:=Andre Valentin <avalentin at marcant.net>
+endef
+
+define Package/xfrm
+$(call Package/xfrm/Default)
+  TITLE:=XFRM IPsec Tunnel Interface config support
+  DEPENDS:=+kmod-xfrm-interface
+endef
+
+define Package/xfrm/description
+ XFRM IPsec Tunnel Interface config support (IPv4 and IPv6) in /etc/config/network.
+endef
+
+define Build/Compile
+endef
+
+define Build/Configure
+endef
+
+define Package/xfrm/install
+	$(INSTALL_DIR) $(1)/lib/netifd/proto
+	$(INSTALL_BIN) ./files/xfrm.sh $(1)/lib/netifd/proto/xfrm.sh
+endef
+
+$(eval $(call BuildPackage,xfrm))
diff --git a/package/network/config/xfrm/files/xfrm.sh b/package/network/config/xfrm/files/xfrm.sh
new file mode 100755
index 0000000000..df28d38613
--- /dev/null
+++ b/package/network/config/xfrm/files/xfrm.sh
@@ -0,0 +1,65 @@
+#!/bin/sh
+
+[ -n "$INCLUDE_ONLY" ] || {
+	. /lib/functions.sh
+	. /lib/functions/network.sh
+	. ../netifd-proto.sh
+	init_proto "$@"
+}
+
+proto_xfrm_setup() {
+	local cfg="$1"
+	local mode="xfrm"
+
+	local tunlink ifid mtu zone
+	json_get_vars tunlink ifid mtu zone
+
+	proto_init_update "$cfg" 1
+
+	proto_add_tunnel
+	json_add_string mode "$mode"
+	json_add_int mtu "${mtu:-1280}"
+
+	[ -z "$tunlink" ] && {
+		proto_notify_error "$cfg" NO_TUNLINK
+		proto_block_restart "$cfg"
+		exit
+	}
+	json_add_string link "$tunlink"
+
+	[ -z "$ifid" ] && {
+		proto_notify_error "$cfg" NO_IFID
+		proto_block_restart "$cfg"
+		exit
+	}
+	json_add_object 'data'
+	[ -n "$ifid" ] && json_add_int ifid "$ifid"
+	json_close_object
+
+	proto_close_tunnel
+
+	proto_add_data
+	[ -n "$zone" ] && json_add_string zone "$zone"
+	proto_close_data
+
+	proto_send_update "$cfg"
+}
+
+proto_xfrm_teardown() {
+	local cfg="$1"
+}
+
+proto_xfrm_init_config() {
+	no_device=1
+	available=1
+
+	proto_config_add_int "mtu"
+	proto_config_add_string "tunlink"
+	proto_config_add_string "zone"
+	proto_config_add_int "ifid"
+}
+
+
+[ -n "$INCLUDE_ONLY" ] || {
+	[ -f /lib/modules/$(uname -r)/xfrm_interface.ko -o -d /sys/module/xfrm_interface ] && add_protocol xfrm
+}
-- 
2.11.0


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel