[OpenWrt-Devel] [PATCH] ar71xx: enable QCA955x SGMII fixup on Mikrotik wAP AC
Etienne Champetier
champetier.etienne at gmail.com
Sun Jul 14 22:30:04 EDT 2019
Hi David,
Le dim. 14 juil. 2019 à 04:25, David Bauer <mail at david-bauer.net> a écrit :
>
> Hi Etienne,
>
> one small remark:
>
> On 14.07.19 04:43, Etienne Champetier wrote:
> > ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
> > ath79_eth1_data.mii_bus_dev = &rbwapgsc_phy_device.dev;
> > ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
> > ath79_eth1_data.phy_mask = BIT(RBWAPGSC_MDIO_PHYADDR);
> > + ath79_eth1_data.enable_sgmii_fixup = 1;
>
> This should be dropped as it's not necessary anymore.
Did some more tests and it's definitely needed (here this is ar71xx &
Linux 4.14)
It's still used for other boards, could you detail why it's not needed
anymore, since what version, reference some commits ?
Thanks
Etienne
>
> Best wishes
> David
>
> > ath79_eth1_pll_data.pll_1000 = 0x03000101;
> > ath79_eth1_pll_data.pll_100 = 0x80000101;
> > ath79_eth1_pll_data.pll_10 = 0x80001313;
> >
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list