[OpenWrt-Devel] [PATCH v2] gemini: Bring up DSA switches

[Linus Walleij]

First group the interfaces on the DSA switch into the
right LAN/WAN groups. Tested successfully on the Itian
Square One SQ201 and the SL93512 reference design
with the Vitesse DSA switches.

As discussed on the mailing list, these switches are
untagged (DSA_TAG_PROTO_NONE) so the DSA slave devices
are only slave devices with not datapath control.
This means each of the CPU-facing interfaces need to
be brought up with the "none" protocol before any
slave devices are brought up. (The sequence matters
here.)

Tested on each of the three affected devices.

Cc: Pawel Dembicki <paweldembicki at gmail.com>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
ChangeLog v1->v2:
- Remove the eth1 from the LAN bridge in both the
  Vitesse switch devices, instead bring up each ethernet
  master interface independently with "none" protocol.
---
 .../gemini/base-files/etc/board.d/02_network  | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100755 target/linux/gemini/base-files/etc/board.d/02_network

diff --git a/target/linux/gemini/base-files/etc/board.d/02_network b/target/linux/gemini/base-files/etc/board.d/02_network
new file mode 100755
index 000000000000..b5c486666c82
--- /dev/null
+++ b/target/linux/gemini/base-files/etc/board.d/02_network
@@ -0,0 +1,27 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+storlink,gemini324)
+	# These are all connected to eth1 thru VSC7385
+	ucidef_set_interface "eth" ifname "eth1" protocol "none"
+	ucidef_set_interfaces_lan_wan "eth1 lan1 lan2 lan3 lan4" "eth0"
+	;;
+itian,sq201)
+	# These are all connected to eth1 thru VSC7395
+	ucidef_set_interface "eth" ifname "eth1" protocol "none"
+	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0"
+	;;
+dlink,dir-685)
+	# These are all connected to eth0 thru RTL8366RB
+	ucidef_set_interface "eth" ifname "eth0" protocol "none"
+	ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan"
+	;;
+esac
+
+board_config_flush
+
+exit 0
-- 
2.21.0


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel