[OpenWrt-Devel] [PATCH 4/9] sunxi: switch to lzma compressed fit image

[Hauke Mehrtens]

On 1/14/19 6:54 PM, Oskari Lemmela wrote:
> Use LZMA compressed fit image to load kernel and dtb.
> Fit image can be used load kernel and dtb from SPI flash.
> 
> Signed-off-by: Oskari Lemmela <oskari at lemmela.net>
> ---
>  package/boot/uboot-sunxi/uEnv-a64.txt      |  5 ++-
>  package/boot/uboot-sunxi/uEnv-default.txt  |  5 ++-
>  package/boot/uboot-sunxi/uEnv-pangolin.txt |  5 ++-
>  target/linux/sunxi/Makefile                |  2 +-
>  target/linux/sunxi/cortexa53/target.mk     |  1 -
>  target/linux/sunxi/image/Makefile          | 17 +++++++---
>  target/linux/sunxi/image/cortex-a53.mk     | 25 ++++-----------
>  target/linux/sunxi/image/cortex-a7.mk      | 36 +++++++++++-----------
>  target/linux/sunxi/image/cortex-a8.mk      | 11 ++++---
>  9 files changed, 49 insertions(+), 58 deletions(-)
> 

My H3 Xunlong Orange Pi R1 does not boot fit images, CONFIG_FIT is not
set in my U-Boot configuration.

I am getting this error:
-------------------------------------------------------------------
Scanning mmc 0:1...
Found U-Boot script /boot.scr
301 bytes read in 1 ms (293.9 KiB/s)
## Executing script at 43100000
2770296 bytes read in 125 ms (21.1 MiB/s)
Wrong Image Format for bootm command
ERROR: can't get kernel image!
SCRIPT FAILED: continuing...

Device 0: device type unknown
... is now current device
ethernet at 1c30000 Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
-------------------------------------------------------------------

I activated these U-Boot configuration options:
CONFIG_FIT=y
CONFIG_LZMA=y
and now I am hitting the next problem:
-------------------------------------------------------------------
Found U-Boot script /boot.scr
301 bytes read in 2 ms (146.5 KiB/s)
## Executing script at 43100000
2772324 bytes read in 126 ms (21 MiB/s)
## Loading kernel from FIT Image at 43300000 ...
   Using 'config at 1' configuration
   Trying 'kernel at 1' kernel subimage
     Description:  ARM OpenWrt Linux-4.14.95
     Type:         Kernel Image
     Compression:  lzma compressed
     Data Start:   0x433000e4
     Data Size:    2755114 Bytes = 2.6 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x42000000
     Entry Point:  0x42000000
     Hash algo:    crc32
     Hash value:   62b0495d
     Hash algo:    sha1
     Hash value:   ca607078b06de248018641320577e910a1967dab
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 43300000 ...
   Using 'config at 1' configuration
   Trying 'fdt at 1' fdt subimage
     Description:  ARM OpenWrt sun8i-h2-plus-orangepi-r1 device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x435a0c54
     Data Size:    15325 Bytes = 15 KiB
     Architecture: ARM
     Hash algo:    crc32
     Hash value:   c9c29924
     Hash algo:    sha1
     Hash value:   6f4bee23444eb246cc8287c40ebb240cdf45aa9d
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x435a0c54
EHCI failed to shut down host controller.
EHCI failed to shut down host controller.
   Uncompressing Kernel Image ... Image too large: increase
CONFIG_SYS_BOOTM_LEN
Must RESET board to recover
resetting ...
-------------------------------------------------------------------

My H5 Xunlong Orange Pi Zero Plus works fine.

Hauke

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel