[OpenWrt-Devel] [PATCH] x86: image: add test module to bootloader

[Tomasz Maciej Nowak]

It was previously added in 546fced, which was part of "intel-microcode:
load as early as possible" series.
Unfortunately the conditionals added to GRUB config caused error on boot,
because on sysupgrade, bootloader is not updated and is left with old
features/modules. Since this module is needed for early microcode load
and transition to this needs to be done step by step, enable the test
module now, so that every newly created image has it already embedded.

Signed-off-by: Tomasz Maciej Nowak <tomek_n at o2.pl>
---
 target/linux/x86/image/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/target/linux/x86/image/Makefile b/target/linux/x86/image/Makefile
index dbf8a8594b..f8c3700d32 100644
--- a/target/linux/x86/image/Makefile
+++ b/target/linux/x86/image/Makefile
@@ -9,8 +9,8 @@ include $(INCLUDE_DIR)/image.mk
 
 export PATH=$(TARGET_PATH):/sbin
 
-GRUB2_MODULES = biosdisk boot chain configfile ext2 linux ls part_msdos reboot serial vga
-GRUB2_MODULES_ISO = biosdisk boot chain configfile iso9660 linux ls part_msdos reboot serial vga
+GRUB2_MODULES = biosdisk boot chain configfile ext2 linux ls part_msdos reboot serial test vga
+GRUB2_MODULES_ISO = biosdisk boot chain configfile iso9660 linux ls part_msdos reboot serial test vga
 GRUB_TERMINALS =
 GRUB_SERIAL_CONFIG =
 GRUB_TERMINAL_CONFIG =
-- 
2.20.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel