[OpenWrt-Devel] [PATCH] ath79: GL.iNet AR300M family: correct LED definitions

[Andreas Ziegler]

add definition of LAN LED to board.d/01_leds
rename WiFi LED with correct color red
rename status LED with correct color green
(like they are used in stock firmware)

Signed-off-by: Andreas Ziegler <dev at andreas-ziegler.de>
---
 target/linux/ath79/base-files/etc/board.d/01_leds    | 4 ++++
 target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi | 4 ++--
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index a56fe58f76..666121e9a8 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -63,6 +63,10 @@ glinet,gl-ar150)
 	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
 	ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02"
 	;;
+glinet,gl-ar300m-nand|\
+glinet,gl-ar300m-nor)
+	ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth1"
+	;;
 glinet,gl-x750)
 	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
 	;;
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi
index 55002b44e3..0042a1cbde 100644
--- a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi
+++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi
@@ -42,7 +42,7 @@
 		compatible = "gpio-leds";
 
 		wlan {
-			label = "gl-ar300m:green:wlan";
+			label = "gl-ar300m:red:wlan";
 			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "phy0tpt";
 		};
@@ -53,7 +53,7 @@
 		};
 
 		led_status: status {
-			label = "gl-ar300m:red:status";
+			label = "gl-ar300m:green:status";
 			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 		};
 	};
-- 
2.20.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel