[OpenWrt-Devel] [PATCH v2 0/3] Speed up caldata/eeprom handling for ar71xx/ath79

[Adrian Schmutzler]

Based on the ipq40xx commit from chunkeey, I tried to do the same for
ar71xx/ath79.

This does NOT cover ramips as suggested in an alternate patch.

Note that I am in favor of the unified code library proposed on the
devel list, but until this has been decided this patch will fix the
target-specific files.

Version 2:
Just changed the commit messages, since obviously prefixing statements with
hash is not such a good idea ...
Sorry for the resend.

BTW: The 99.9 % speed improvement seems really unbelievable. Did I do it right?

Adrian Schmutzler (3):
  ath79: Speed up caldata/eeprom handling
  ar71xx: Speed up caldata/eeprom handling
  ar71xx: Speed up mtd extraction in ar71xx.sh

 .../linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom  | 6 +++---
 .../ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata      | 6 +++---
 target/linux/ar71xx/base-files/lib/ar71xx.sh                        | 4 ++--
 .../linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom   | 4 ++--
 .../linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 6 +++---
 5 files changed, 13 insertions(+), 13 deletions(-)

-- 
2.11.0


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel