[OpenWrt-Devel] [PATCH 5/5] apm821xx: add disk-activity triggers via DT.
Christian Lamparter
chunkeey at gmail.com
Mon Oct 15 14:00:09 EDT 2018
The WNDR4700 and the MBL have a dedicated HDD activity LED.
This patch adds the default led triggers to the DTS and
removes the entries in 01_leds.
Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
---
target/linux/apm821xx/base-files/etc/board.d/01_leds | 5 -----
target/linux/apm821xx/dts/netgear-wndr4700.dts | 1 +
target/linux/apm821xx/dts/wd-mybooklive.dts | 1 +
3 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/target/linux/apm821xx/base-files/etc/board.d/01_leds b/target/linux/apm821xx/base-files/etc/board.d/01_leds
index 8ba57bdf06..632d22a470 100755
--- a/target/linux/apm821xx/base-files/etc/board.d/01_leds
+++ b/target/linux/apm821xx/base-files/etc/board.d/01_leds
@@ -23,12 +23,7 @@ meraki,mx60)
ucidef_set_led_switch "lan4" "LAN4" "mx60:green:lan4" "switch0" "0x02"
;;
-wd,mybooklive)
- ucidef_set_led_ide "sata" "SATA" "mbl:blue:power"
- ;;
-
netgear,wndr4700)
- ucidef_set_led_ide "sata" "SATA" "wndr4700:green:hd"
ucidef_set_led_switch "wan_green" "WAN (green)" "wndr4700:green:wan" "switch0" "0x20"
ucidef_set_led_netdev "wan_yellow" "WAN (yellow)" "wndr4700:yellow:wan" "eth0.2" "tx rx"
ucidef_set_led_usbport "usb3" "USB3" "wndr4700:blue:usb" "usb2-port1" "usb2-port2" "usb3-port1" "usb3-port2"
diff --git a/target/linux/apm821xx/dts/netgear-wndr4700.dts b/target/linux/apm821xx/dts/netgear-wndr4700.dts
index a8f73e8a04..6a8c9990e6 100644
--- a/target/linux/apm821xx/dts/netgear-wndr4700.dts
+++ b/target/linux/apm821xx/dts/netgear-wndr4700.dts
@@ -390,6 +390,7 @@
hd-green {
label = "wndr4700:green:hd";
gpios = <&GPIO0 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "disk-activity";
};
hd-red {
diff --git a/target/linux/apm821xx/dts/wd-mybooklive.dts b/target/linux/apm821xx/dts/wd-mybooklive.dts
index 4c61987119..9412f38d4a 100644
--- a/target/linux/apm821xx/dts/wd-mybooklive.dts
+++ b/target/linux/apm821xx/dts/wd-mybooklive.dts
@@ -103,6 +103,7 @@
power-blue {
label = "mbl:blue:power";
gpios = <&GPIO1 6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "disk-activity";
};
};
--
2.19.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list