[OpenWrt-Devel] [PATCH] mtd: add spi nand driver
Luochongjun
luochongjun at gl-inet.com
Thu May 17 22:08:35 EDT 2018
The source code from https://github.com/bbrezillon/linux-0day/tree/nand/spi-nand/drivers/mtd/nand/spi,
I made some modification for it,added to GD5F1GQ4 and EM73C04 and FM25G01A
support, the driver on the gl-ar300m and gl-ar750 validation to pass.
Signed-off-by: Luo chongjun <luochongjun at gl-inet.com>
---
.../patches-4.9/491-mtd-spi-nand-driver.patch | 2785 ++++++++++++++++++++
1 file changed, 2785 insertions(+)
create mode 100644 target/linux/ar71xx/patches-4.9/491-mtd-spi-nand-driver.patch
diff --git a/target/linux/ar71xx/patches-4.9/491-mtd-spi-nand-driver.patch b/target/linux/ar71xx/patches-4.9/491-mtd-spi-nand-driver.patch
new file mode 100644
index 0000000..e77ecca
--- /dev/null
+++ b/target/linux/ar71xx/patches-4.9/491-mtd-spi-nand-driver.patch
@@ -0,0 +1,2785 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -589,4 +589,12 @@ config MTD_NAND_AR934X_HW_ECC
+ bool "Hardware ECC support for the AR934X NAND Controller (EXPERIMENTAL)"
+ depends on MTD_NAND_AR934X
+
++config MTD_NAND_SPI_NAND
++ tristate "SPI Nand flash support"
++ default n
++ depends on MTD_NAND
++ help
++ Enables the driver for SPI NAND flash controller on Qualcomm-Atheros System on Chips
++ This controller is used on families AR71xx and AR9xxx.
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -62,5 +62,6 @@ obj-$(CONFIG_MTD_NAND_HISI504) +
+ obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
+ obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
+ obj-$(CONFIG_MTD_NAND_MTK) += mtk_nand.o mtk_ecc.o
++obj-$(CONFIG_MTD_NAND_SPI_NAND) += spi_nand/
+
+ nand-objs := nand_base.o nand_bbt.o nand_timings.o
+--- /dev/null
++++ b/drivers/mtd/nand/spi_nand/Makefile
+@@ -0,0 +1 @@
++obj-$(CONFIG_MTD_NAND_SPI_NAND) += generic-spinand-controller.o core.o bbt.o nand_core.o micron.o etron.o gigadevice.o paragon.o
+\ No newline at end of file
+--- /dev/null
++++ b/drivers/mtd/nand/spi_nand/bbt.c
+@@ -0,0 +1,79 @@
++/*
++ * Copyright (c) 2017 Free Electrons
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Authors:
++ * Boris Brezillon <boris.brezillon at free-electrons.com>
++ * Peter Pan <peterpandong at micron.com>
++ */
++
++#define pr_fmt(fmt) "nand-bbt: " fmt
++
++#include <linux/mtd/nand.h>
++#include <linux/slab.h>
++#include <linux/mtd/spinand.h>
++
++int nanddev_bbt_init(struct nand_device *nand)
++{
++ unsigned int nwords = nanddev_neraseblocks(nand);
++
++ nand->bbt.cache = kzalloc(nwords, GFP_KERNEL);
++ if (!nand->bbt.cache)
++ return -ENOMEM;
++ memset(nand->bbt.cache,0,nwords);
++ return 0;
++}
++EXPORT_SYMBOL_GPL(nanddev_bbt_init);
++
++void nanddev_bbt_cleanup(struct nand_device *nand)
++{
++ kfree(nand->bbt.cache);
++}
++EXPORT_SYMBOL_GPL(nanddev_bbt_cleanup);
++
++int nanddev_bbt_update(struct nand_device *nand)
++{
++ return 0;
++}
++EXPORT_SYMBOL_GPL(nanddev_bbt_update);
++
++int nanddev_bbt_get_block_status(const struct nand_device *nand,
++ unsigned int entry)
++{
++ unsigned char *pos = nand->bbt.cache + entry;
++ unsigned long status;
++
++ if (entry >= nanddev_neraseblocks(nand)){
++ return -ERANGE;
++ }
++
++ status = pos[0];
++
++
++ return status & 0xff;
++}
++EXPORT_SYMBOL_GPL(nanddev_bbt_get_block_status);
++
++int nanddev_bbt_set_block_status(struct nand_device *nand, unsigned int entry,
++ enum nand_bbt_block_status status)
++{
++ unsigned char *pos = nand->bbt.cache + entry;;
++
++ if (entry >= nanddev_neraseblocks(nand)){
++ return -ERANGE;
++ }
++
++ pos[0] = status & 0xff;
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(nanddev_bbt_set_block_status);
+--- /dev/null
++++ b/drivers/mtd/nand/spi_nand/core.c
+@@ -0,0 +1,902 @@
++/*
++ *
++ * Copyright (c) 2016-2017 Micron Technology, Inc.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#define pr_fmt(fmt) "spi-nand: " fmt
++
++#include <linux/kernel.h>
++#include <linux/device.h>
++#include <linux/module.h>
++#include <linux/jiffies.h>
++#include <linux/mtd/spinand.h>
++#include <linux/slab.h>
++#include <linux/of.h>
++static inline void spinand_adjust_cache_op(struct spinand_device *spinand,
++ const struct nand_page_io_req *req,
++ struct spinand_op *op)
++{
++ if (!spinand->manufacturer.manu->ops->adjust_cache_op)
++ return;
++
++ spinand->manufacturer.manu->ops->adjust_cache_op(spinand, req, op);
++}
++
++static inline int spinand_exec_op(struct spinand_device *spinand,
++ struct spinand_op *op)
++{
++ return spinand->controller.controller->ops->exec_op(spinand, op);
++}
++
++static inline void spinand_op_init(struct spinand_op *op)
++{
++ memset(op, 0, sizeof(struct spinand_op));
++ op->addr_nbits = 1;
++ op->data_nbits = 1;
++}
++
++static int spinand_read_reg_op(struct spinand_device *spinand, u8 reg, u8 *val)
++{
++ struct spinand_op op;
++ int ret;
++
++ spinand_op_init(&op);
++ op.cmd = SPINAND_CMD_GET_FEATURE;
++ op.n_addr = 1;
++ op.addr[0] = reg;
++ op.n_rx = 1;
++ op.rx_buf = val;
++
++ ret = spinand_exec_op(spinand, &op);
++ if (ret < 0)
++ pr_err("failed to read register %d (err = %d)\n", reg, ret);
++
++ return ret;
++}
++
++static int spinand_write_reg_op(struct spinand_device *spinand, u8 reg, u8 val)
++{
++ struct spinand_op op;
++ int ret;
++
++ spinand_op_init(&op);
++ op.cmd = SPINAND_CMD_SET_FEATURE;
++ op.n_addr = 1;
++ op.addr[0] = reg;
++ op.n_tx = 1;
++ op.tx_buf = &val;
++
++ ret = spinand_exec_op(spinand, &op);
++ if (ret < 0)
++ pr_err("failed to write register %d (err = %d)\n", reg, ret);
++
++ return ret;
++}
++
++static int spinand_get_cfg(struct spinand_device *spinand, u8 *cfg)
++{
++ return spinand_read_reg_op(spinand, REG_CFG, cfg);
++}
++
++static int spinand_set_cfg(struct spinand_device *spinand, u8 cfg)
++{
++ return spinand_write_reg_op(spinand, REG_CFG, cfg);
++}
++
++static int spinand_read_status(struct spinand_device *spinand, u8 *status)
++{
++ return spinand_read_reg_op(spinand, REG_STATUS, status);
++}
++
++static void spinand_disable_ecc(struct spinand_device *spinand)
++{
++ u8 cfg = 0;
++
++ spinand_get_cfg(spinand, &cfg);
++
++ if ((cfg & CFG_ECC_MASK) == CFG_ECC_ENABLE) {
++ cfg &= ~CFG_ECC_ENABLE;
++ spinand_set_cfg(spinand, cfg);
++ }
++}
++
++static void spinand_enable_ecc(struct spinand_device *spinand)
++{
++ u8 cfg = 0;
++
++ spinand_get_cfg(spinand, &cfg);
++
++ if ((cfg & CFG_ECC_MASK) != CFG_ECC_ENABLE) {
++ cfg |= CFG_ECC_ENABLE;
++ spinand_set_cfg(spinand, cfg);
++ }
++}
++static int spinand_write_enable_op(struct spinand_device *spinand)
++{
++ struct spinand_op op;
++
++ spinand_op_init(&op);
++ op.cmd = SPINAND_CMD_WR_ENABLE;
++
++ return spinand_exec_op(spinand, &op);
++}
++
++static int spinand_load_page_op(struct spinand_device *spinand,
++ const struct nand_page_io_req *req)
++{
++ struct nand_device *nand = &spinand->base;
++ unsigned int row = nanddev_pos_to_offs(nand, &req->pos);
++ struct spinand_op op;
++
++ spinand_op_init(&op);
++ op.cmd = SPINAND_CMD_PAGE_READ;
++ op.n_addr = 3;
++ unsigned int page = row /nand->memorg.pagesize;
++ unsigned int block = page /nand->memorg.pages_per_eraseblock;
++ op.addr[0] = block >> 10;
++ op.addr[1] = block >> 2;
++ op.addr[2] = ((block & 0x3)<<6)|(page & 0x3f);
++
++ return spinand_exec_op(spinand, &op);
++}
++
++static int spinand_get_address_bits(u8 opcode)
++{
++ switch (opcode) {
++ case SPINAND_CMD_READ_FROM_CACHE_QUAD_IO:
++ return 4;
++ case SPINAND_CMD_READ_FROM_CACHE_DUAL_IO:
++ return 2;
++ default:
++ return 1;
++ }
++}
++
++static int spinand_get_data_bits(u8 opcode)
++{
++ switch (opcode) {
++ case SPINAND_CMD_READ_FROM_CACHE_QUAD_IO:
++ case SPINAND_CMD_READ_FROM_CACHE_X4:
++ case SPINAND_CMD_PROG_LOAD_X4:
++ case SPINAND_CMD_PROG_LOAD_RDM_DATA_X4:
++ return 4;
++ case SPINAND_CMD_READ_FROM_CACHE_DUAL_IO:
++ case SPINAND_CMD_READ_FROM_CACHE_X2:
++ return 2;
++ default:
++ return 1;
++ }
++}
++
++static int spinand_read_from_cache_op(struct spinand_device *spinand,
++ const struct nand_page_io_req *req)
++{
++ struct nand_device *nand = &spinand->base;
++ struct nand_page_io_req adjreq = *req;
++ struct spinand_op op;
++ u16 column = 0;
++ int ret;
++
++ spinand_op_init(&op);
++ op.cmd = spinand->read_cache_op;
++ op.n_addr = 3;
++ op.addr_nbits = spinand_get_address_bits(spinand->read_cache_op);
++ if (req->datalen) {
++ adjreq.datalen = nanddev_page_size(nand);
++ adjreq.dataoffs = 0;
++ adjreq.databuf.in = spinand->buf;
++ op.rx_buf = spinand->buf;
++ op.n_rx = adjreq.datalen;
++ }
++
++ if (req->ooblen) {
++ adjreq.ooblen = nanddev_per_page_oobsize(nand);
++ adjreq.ooboffs = 0;
++ adjreq.oobbuf.in = spinand->oobbuf;
++ op.n_rx = nanddev_per_page_oobsize(nand);
++ if (!op.rx_buf) {
++ op.rx_buf = spinand->oobbuf;
++ column = nanddev_page_size(nand);
++ }
++ }
++ op.addr[0] = 0;
++ op.addr[1] = column >> 8;
++ op.addr[2] = column;
++ op.data_nbits = spinand_get_data_bits(spinand->read_cache_op);
++ spinand_adjust_cache_op(spinand, &adjreq, &op);
++
++ ret = spinand_exec_op(spinand, &op);
++ if (ret)
++ return ret;
++
++ if (req->datalen)
++ memcpy(req->databuf.in, spinand->buf + req->dataoffs,
++ req->datalen);
++
++ if (req->ooblen)
++ memcpy(req->oobbuf.in, spinand->oobbuf + req->ooboffs,
++ req->ooblen);
++
++ return 0;
++}
++
++static int spinand_write_to_cache_op(struct spinand_device *spinand,
++ const struct nand_page_io_req *req)
++{
++ struct nand_device *nand = &spinand->base;
++ struct nand_page_io_req adjreq = *req;
++ struct spinand_op op;
++ u16 column = 0;
++
++ spinand_op_init(&op);
++ op.cmd = spinand->write_cache_op;
++ op.n_addr = 2;
++
++ memset(spinand->buf, 0xff,
++ nanddev_page_size(nand) +
++ nanddev_per_page_oobsize(nand));
++
++ if (req->datalen) {
++ memcpy(spinand->buf + req->dataoffs, req->databuf.out,
++ req->datalen);
++ adjreq.dataoffs = 0;
++ adjreq.datalen = nanddev_page_size(nand);
++ adjreq.databuf.out = spinand->buf;
++ op.tx_buf = spinand->buf;
++ op.n_tx = adjreq.datalen;
++ }
++
++ if (req->ooblen) {
++ memcpy(spinand->oobbuf + req->ooboffs, req->oobbuf.out,
++ req->ooblen);
++ memset(spinand->oobbuf,0x00,2);
++ adjreq.ooblen = nanddev_per_page_oobsize(nand);
++ adjreq.ooboffs = 0;
++ op.n_tx = nanddev_page_size(nand)+adjreq.ooblen;
++
++ if (!op.tx_buf) {
++ printk("oob write \n");
++ op.tx_buf = spinand->buf;
++ //column = nanddev_page_size(nand);
++ }
++ }
++
++ op.addr[0] = column >> 8;
++ op.addr[1] = column;
++
++ op.addr_nbits = spinand_get_address_bits(spinand->write_cache_op);
++ op.data_nbits = spinand_get_data_bits(spinand->write_cache_op);
++ spinand_adjust_cache_op(spinand, &adjreq, &op);
++
++ return spinand_exec_op(spinand, &op);
++}
++
++static int spinand_program_op(struct spinand_device *spinand,
++ const struct nand_page_io_req *req)
++{
++ struct nand_device *nand = spinand_to_nand(spinand);
++ unsigned int row = nanddev_pos_to_offs(nand, &req->pos);
++ struct spinand_op op;
++ spinand_op_init(&op);
++ op.cmd = SPINAND_CMD_PROG_EXC;
++ op.n_addr = 3;
++ unsigned int page = row /nand->memorg.pagesize;
++ unsigned int block = page /nand->memorg.pages_per_eraseblock;
++ op.addr[0] = block >> 10;
++ op.addr[1] = block >> 2;
++ op.addr[2] = ((block & 0x3)<<6)|(page & 0x3f);
++
++ return spinand_exec_op(spinand, &op);
++}
++
++static int spinand_erase_op(struct spinand_device *spinand,
++ const struct nand_pos *pos)
++{
++ struct nand_device *nand = &spinand->base;
++ unsigned int row = nanddev_pos_to_offs(nand, pos);
++ struct spinand_op op;
++
++ spinand_op_init(&op);
++ op.cmd = SPINAND_CMD_BLK_ERASE;
++ op.n_addr = 3;
++ unsigned int page = row /nand->memorg.pagesize;
++ unsigned int block = page /nand->memorg.pages_per_eraseblock;
++ op.addr[0] = block >> 10;
++ op.addr[1] = block >> 2;
++ op.addr[2] = ((block & 0x3)<<6)|(page & 0x3f);
++
++ return spinand_exec_op(spinand, &op);
++}
++
++static int spinand_wait(struct spinand_device *spinand, u8 *s)
++{
++ unsigned long timeo = jiffies + msecs_to_jiffies(400);
++ u8 status;
++
++ do {
++ spinand_read_status(spinand, &status);
++ if ((status & STATUS_OIP_MASK) == STATUS_READY)
++ goto out;
++ } while (time_before(jiffies, timeo));
++
++ /*
++ * Extra read, just in case the STATUS_READY bit has changed
++ * since our last check
++ */
++ spinand_read_status(spinand, &status);
++out:
++ if (s)
++ *s = status;
++
++ return (status & STATUS_OIP_MASK) == STATUS_READY ? 0 : -ETIMEDOUT;
++}
++
++static int spinand_read_id_op(struct spinand_device *spinand, u8 *buf)
++{
++ struct spinand_op op;
++
++ spinand_op_init(&op);
++ op.cmd = SPINAND_CMD_READ_ID;
++ op.n_rx = SPINAND_MAX_ID_LEN;
++ op.rx_buf = buf;
++
++ return spinand_exec_op(spinand, &op);
++}
++
++static int spinand_reset_op(struct spinand_device *spinand)
++{
++ struct spinand_op op;
++ int ret;
++
++ spinand_op_init(&op);
++ op.cmd = SPINAND_CMD_RESET;
++
++ ret = spinand_exec_op(spinand, &op);
++ if (ret < 0) {
++ pr_err("failed to reset the NAND (err = %d)\n", ret);
++ goto out;
++ }
++
++ ret = spinand_wait(spinand, NULL);
++
++out:
++ return ret;
++}
++
++static int spinand_lock_block(struct spinand_device *spinand, u8 lock)
++{
++ return spinand_write_reg_op(spinand, REG_BLOCK_LOCK, lock);
++}
++
++static int spinand_read_page(struct spinand_device *spinand,
++ const struct nand_page_io_req *req)
++{
++ struct nand_device *nand = spinand_to_nand(spinand);
++ int ret;
++
++ spinand_load_page_op(spinand, req);
++
++ ret = spinand_wait(spinand, NULL);
++ if (ret < 0) {
++ pr_err("failed to load page @%llx (err = %d)\n",
++ nanddev_pos_to_offs(nand, &req->pos), ret);
++ return ret;
++ }
++
++ spinand_read_from_cache_op(spinand, req);
++
++ return 0;
++}
++
++static int spinand_write_page(struct spinand_device *spinand,
++ const struct nand_page_io_req *req)
++{
++ struct nand_device *nand = spinand_to_nand(spinand);
++ u8 status;
++ int ret = 0;
++
++ spinand_write_enable_op(spinand);
++ spinand_write_to_cache_op(spinand, req);
++ spinand_program_op(spinand, req);
++
++ ret = spinand_wait(spinand, &status);
++ if (!ret && (status & STATUS_P_FAIL_MASK) == STATUS_P_FAIL)
++ ret = -EIO;
++
++ if (ret < 0)
++ pr_err("failed to program page @%llx (err = %d)\n",
++ nanddev_pos_to_offs(nand, &req->pos), ret);
++
++ return ret;
++}
++
++static int spinand_mtd_read(struct mtd_info *mtd, loff_t from,
++ struct mtd_oob_ops *ops)
++{
++ struct spinand_device *spinand = mtd_to_spinand(mtd);
++ struct nand_device *nand = mtd_to_nanddev(mtd);
++ struct nand_io_iter iter;
++ int ret;
++
++ mutex_lock(&spinand->lock);
++ nanddev_io_for_each_page(nand, from, ops, &iter) {
++ ret = spinand_read_page(spinand, &iter.req);
++ if (ret)
++ break;
++
++ ops->retlen += iter.req.datalen;
++ ops->oobretlen += iter.req.datalen;
++ }
++ mutex_unlock(&spinand->lock);
++
++ return ret;
++}
++
++static int spinand_mtd_write(struct mtd_info *mtd, loff_t to,
++ struct mtd_oob_ops *ops)
++{
++ struct spinand_device *spinand = mtd_to_spinand(mtd);
++ struct nand_device *nand = mtd_to_nanddev(mtd);
++ struct nand_io_iter iter;
++ int ret = 0;
++ mutex_lock(&spinand->lock);
++ nanddev_io_for_each_page(nand, to, ops, &iter) {
++ ret = spinand_write_page(spinand, &iter.req);
++ if (ret)
++ return ret;
++
++ ops->retlen += iter.req.datalen;
++ ops->oobretlen += iter.req.ooblen;
++ }
++ mutex_unlock(&spinand->lock);
++
++ return ret;
++}
++
++static bool spinand_isbad(struct nand_device *nand, const struct nand_pos *pos)
++{
++ struct spinand_device *spinand = nand_to_spinand(nand);
++ struct nand_page_io_req req = {
++ .pos = *pos,
++ .ooblen = 2,
++ .ooboffs = 0,
++ .oobbuf.in = spinand->oobbuf,
++ };
++
++ memset(spinand->oobbuf, 0, 2);
++ spinand_read_page(spinand, &req);
++ if (spinand->oobbuf[0] != 0xff || spinand->oobbuf[1] != 0xff)
++ return true;
++
++ return false;
++}
++
++static int spinand_mtd_block_isbad(struct mtd_info *mtd, loff_t offs)
++{
++ struct nand_device *nand = mtd_to_nanddev(mtd);
++ struct spinand_device *spinand = nand_to_spinand(nand);
++ struct nand_pos pos;
++ int ret;
++ nanddev_offs_to_pos(nand, offs, &pos);
++ mutex_lock(&spinand->lock);
++ ret = spinand_isbad(nand, &pos);
++ mutex_unlock(&spinand->lock);
++
++ return ret;
++}
++
++static int spinand_markbad(struct nand_device *nand, const struct nand_pos *pos)
++{
++ struct spinand_device *spinand = nand_to_spinand(nand);
++ struct nand_page_io_req req = {
++ .pos = *pos,
++ .ooboffs = 0,
++ .ooblen = 2,
++ .oobbuf.out = spinand->oobbuf,
++ };
++
++ /* Erase block before marking it bad. */
++ spinand_write_enable_op(spinand);
++ spinand_erase_op(spinand, pos);
++ u8 status;
++ spinand_wait(spinand, &status);
++
++ memset(spinand->oobbuf, 0x00, 2);
++ return spinand_write_page(spinand, &req);
++}
++
++
++static int spinand_mtd_block_markbad(struct mtd_info *mtd, loff_t offs)
++{
++ struct nand_device *nand = mtd_to_nanddev(mtd);
++ struct spinand_device *spinand = nand_to_spinand(nand);
++ struct nand_pos pos;
++ int ret;
++ nanddev_offs_to_pos(nand, offs, &pos);
++ /*bad block mark the first page*/
++ pos.page=0;
++
++ mutex_lock(&spinand->lock);
++ ret = nanddev_markbad(nand, &pos);
++ mutex_unlock(&spinand->lock);
++
++ return ret;
++}
++
++static int spinand_erase(struct nand_device *nand, const struct nand_pos *pos)
++{
++ struct spinand_device *spinand = nand_to_spinand(nand);
++ u8 status;
++ int ret;
++
++ spinand_write_enable_op(spinand);
++ spinand_erase_op(spinand, pos);
++
++ ret = spinand_wait(spinand, &status);
++
++ if (!ret && (status & STATUS_E_FAIL_MASK) == STATUS_E_FAIL)
++ ret = -EIO;
++
++ if (ret)
++ pr_err("failed to erase block %d (err = %d)\n",
++ pos->eraseblock, ret);
++
++ return ret;
++}
++
++static int spinand_mtd_erase(struct mtd_info *mtd,
++ struct erase_info *einfo)
++{
++ struct spinand_device *spinand = mtd_to_spinand(mtd);
++ int ret;
++// printk("erase block\n");
++ mutex_lock(&spinand->lock);
++ ret = nanddev_mtd_erase(mtd, einfo);
++ mutex_unlock(&spinand->lock);
++
++ //if (!ret)
++ // mtd_erase_callback(einfo);
++
++ return ret;
++}
++
++static int spinand_mtd_block_isreserved(struct mtd_info *mtd, loff_t offs)
++{
++ struct spinand_device *spinand = mtd_to_spinand(mtd);
++ struct nand_device *nand = mtd_to_nanddev(mtd);
++ struct nand_pos pos;
++ int ret;
++
++ nanddev_offs_to_pos(nand, offs, &pos);
++ mutex_lock(&spinand->lock);
++ ret = nanddev_isreserved(nand, &pos);
++ mutex_unlock(&spinand->lock);
++
++ return ret;
++}
++
++static void spinand_set_rd_wr_op(struct spinand_device *spinand)
++{
++ u32 controller_cap = spinand->controller.controller->caps;
++ u32 rw_mode = spinand->rw_mode;
++
++ if ((controller_cap & SPINAND_CAP_RD_QUAD) &&
++ (rw_mode & SPINAND_RD_QUAD))
++ spinand->read_cache_op = SPINAND_CMD_READ_FROM_CACHE_QUAD_IO;
++ else if ((controller_cap & SPINAND_CAP_RD_X4) &&
++ (rw_mode & SPINAND_RD_X4))
++ spinand->read_cache_op = SPINAND_CMD_READ_FROM_CACHE_X4;
++ else if ((controller_cap & SPINAND_CAP_RD_DUAL) &&
++ (rw_mode & SPINAND_RD_DUAL))
++ spinand->read_cache_op = SPINAND_CMD_READ_FROM_CACHE_DUAL_IO;
++ else if ((controller_cap & SPINAND_CAP_RD_X2) &&
++ (rw_mode & SPINAND_RD_X2))
++ spinand->read_cache_op = SPINAND_CMD_READ_FROM_CACHE_X2;
++ else
++ spinand->read_cache_op = SPINAND_CMD_READ_FROM_CACHE_FAST;
++
++ if ((controller_cap & SPINAND_CAP_WR_X4) &&
++ (rw_mode & SPINAND_WR_X4))
++ spinand->write_cache_op = SPINAND_CMD_PROG_LOAD_X4;
++ else
++ spinand->write_cache_op = SPINAND_CMD_PROG_LOAD;
++}
++
++static const struct nand_ops spinand_ops = {
++ .erase = spinand_erase,
++ .markbad = spinand_markbad,
++ .isbad = spinand_isbad,
++};
++
++static const struct spinand_manufacturer *spinand_manufacturers[] = {
++ µn_spinand_manufacturer,
++ &etron_spinand_manufacturer,
++ &giga_spinand_manufacturer,
++ ¶gon_spinand_manufacturer,
++};
++
++
++static int spinand_manufacturer_detect(struct spinand_device *spinand)
++{
++ unsigned int i;
++
++ for (i = 0; i < ARRAY_SIZE(spinand_manufacturers); i++) {
++ if (spinand_manufacturers[i]->ops->detect(spinand)) {
++ spinand->manufacturer.manu = spinand_manufacturers[i];
++
++ return 0;
++ }
++ }
++
++ return -ENODEV;
++}
++
++static int spinand_manufacturer_init(struct spinand_device *spinand)
++{
++ if (spinand->manufacturer.manu->ops->init)
++ return spinand->manufacturer.manu->ops->init(spinand);
++
++ return 0;
++}
++
++static void spinand_manufacturer_cleanup(struct spinand_device *spinand)
++{
++ /* Release manufacturer private data */
++ if (spinand->manufacturer.manu->ops->cleanup)
++ return spinand->manufacturer.manu->ops->cleanup(spinand);
++}
++static int spinand_detect(struct spinand_device *spinand)
++{
++ struct nand_device *nand = &spinand->base;
++ int ret;
++
++ spinand_reset_op(spinand);
++ spinand_read_id_op(spinand, spinand->id.data);
++ spinand->id.len = SPINAND_MAX_ID_LEN;
++
++ ret = spinand_manufacturer_detect(spinand);
++ if (ret) {
++ pr_err("unknown raw ID %*phN\n",
++ SPINAND_MAX_ID_LEN, spinand->id.data);
++ return ret;
++ }
++
++ pr_info("%s SPI NAND was found.\n", spinand->manufacturer.manu->name);
++ pr_info("%d MiB, block size: %d KiB, page size: %d, OOB size: %d\n",
++ (int)(nanddev_size(nand) >> 20),
++ nanddev_eraseblock_size(nand) >> 10,
++ nanddev_page_size(nand), nanddev_per_page_oobsize(nand));
++ return 0;
++}
++/**
++ * devm_spinand_alloc - [SPI NAND Interface] allocate SPI NAND device instance
++ * @dev: pointer to device model structure
++ */
++struct spinand_device *devm_spinand_alloc(struct device *dev)
++{
++ struct spinand_device *spinand;
++ struct mtd_info *mtd;
++
++ spinand = devm_kzalloc(dev, sizeof(*spinand), GFP_KERNEL);
++ if (!spinand)
++ return ERR_PTR(-ENOMEM);
++
++ spinand_set_of_node(spinand, dev->of_node);
++ mutex_init(&spinand->lock);
++ mtd = spinand_to_mtd(spinand);
++ mtd->dev.parent = dev;
++
++ return spinand;
++}
++EXPORT_SYMBOL_GPL(devm_spinand_alloc);
++static int spinand_read(struct mtd_info *mtd, loff_t from, size_t len,size_t *retlen, u_char *buf)
++{
++ int ret;
++ struct mtd_oob_ops ops = {
++ .len = len,
++ .datbuf = buf,
++ };
++ ret = mtd->_read_oob(mtd, from, &ops);
++ *retlen = ops.retlen;
++
++ if (unlikely(ret < 0))
++ return ret;
++ if (mtd->ecc_strength == 0)
++ return 0; /* device lacks ecc */
++ return ret >= mtd->bitflip_threshold ? -EUCLEAN : 0;
++}
++
++static int spinand_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,const u_char *buf)
++{
++ struct mtd_oob_ops ops = {
++ .len = len,
++ .datbuf = (u8 *)buf,
++ };
++ int ret;
++
++ ret = mtd->_write_oob(mtd, to, &ops);
++ *retlen = ops.retlen;
++ return ret;
++
++}
++
++int spinand_bbt_create(struct nand_device *nand )
++{
++ unsigned int block=0;
++ unsigned int entry=0;
++ int status=NAND_BBT_BLOCK_STATUS_UNKNOWN;
++ int ret = 0;
++ struct nand_pos pos;
++ struct mtd_info *mtd = nanddev_to_mtd(nand);
++ if (nanddev_bbt_is_initialized(nand)) {
++ for(block=0;block < nand->memorg.eraseblocks_per_lun;block++){
++ pos.eraseblock=block;
++ pos.lun=0;
++ pos.page=0;
++ pos.plane=0;
++ pos.target=0;
++ entry = nanddev_bbt_pos_to_entry(nand, &pos);
++ if(nand->ops->isbad(nand, &pos)){
++ printk("found bad block %llx\n",nanddev_pos_to_offs(nand,&pos));
++ ret = nanddev_bbt_set_block_status(nand, entry, NAND_BBT_BLOCK_FACTORY_BAD);
++ ret = nanddev_bbt_update(nand);
++ mtd->ecc_stats.badblocks++;
++ }
++ else{
++ nanddev_bbt_set_block_status(nand, entry, NAND_BBT_BLOCK_GOOD);
++ }
++ }
++
++ }
++ return 0;
++
++}
++int write_test(struct mtd_info *mtd,loff_t to,size_t len)
++{
++ struct nand_device *nand = mtd_to_nanddev(mtd);
++ size_t retlen;
++ unsigned char *buf;
++ int i=0;
++
++ buf = kzalloc(nanddev_page_size(nand) +
++ nanddev_per_page_oobsize(nand),
++ GFP_KERNEL);
++ for(i=0;i<len;i++){
++ buf[i]=i%16;
++ }
++ spinand_write(mtd,to,len,&retlen,buf);
++ kfree(buf);
++ return 0;
++}
++int erase_test(struct mtd_info *mtd,uint64_t from,uint64_t len)
++{
++ struct erase_info einfo={
++ .mtd=mtd,
++ .addr=from,
++ .len=len,
++ .callback = NULL,
++ };
++
++ spinand_mtd_erase(mtd,&einfo);
++ return 0;
++}
++int read_test(struct mtd_info *mtd,loff_t from,size_t len)
++{
++ struct nand_device *nand = mtd_to_nanddev(mtd);
++ size_t retlen;
++ unsigned char *buf;
++ int i=0;
++ char en=16;
++ buf = kzalloc(nanddev_page_size(nand) +
++ nanddev_per_page_oobsize(nand),
++ GFP_KERNEL);
++ spinand_read(mtd,from,len,&retlen,buf);
++ for(i=0;i<len;i++){
++ if(i%en==0){
++ printk("\n");
++ }
++ printk("%2X ",buf[i]);
++ if(i==2047)en=8;
++ }
++ kfree(buf);
++ return 0;
++}
++
++int mark_bad_test(struct mtd_info *mtd,loff_t offs)
++{
++ return spinand_mtd_block_markbad(mtd,offs);
++}
++/**
++ * spinand_init - [SPI NAND Interface] initialize the SPI NAND device
++ * @spinand: SPI NAND device structure
++ */
++int spinand_init(struct spinand_device *spinand, struct module *owner)
++{
++ struct mtd_info *mtd = spinand_to_mtd(spinand);
++ struct nand_device *nand = mtd_to_nanddev(mtd);
++ int ret;
++
++ ret = spinand_detect(spinand);
++ if (ret) {
++ pr_err("Failed to detect a SPI NAND (err = %d).\n", ret);
++ return ret;
++ }
++
++ ret = nanddev_init(nand, &spinand_ops, owner);
++ if (ret)
++ return ret;
++
++ spinand_set_rd_wr_op(spinand);
++
++ /*
++ * Use kzalloc() instead of devm_kzalloc() here, because some drivers
++ * may use this buffer for DMA access.
++ * Memory allocated by devm_ does not guarantee DMA-safe alignment.
++ */
++ spinand->buf = kzalloc(nanddev_page_size(nand) +
++ nanddev_per_page_oobsize(nand),
++ GFP_KERNEL);
++ if (!spinand->buf)
++ return -ENOMEM;
++
++ spinand->oobbuf = spinand->buf + nanddev_page_size(nand);
++
++ ret = spinand_manufacturer_init(spinand);
++ if (ret) {
++ pr_err("Init of SPI NAND failed (err = %d).\n", ret);
++ goto err_free_buf;
++ }
++
++ /*
++ * Right now, we don't support ECC, so let the whole oob
++ * area is available for user.
++ */
++ mtd->_read_oob = spinand_mtd_read;
++ mtd->_write_oob = spinand_mtd_write;
++ mtd->_block_isbad = spinand_mtd_block_isbad;
++ mtd->_block_markbad = spinand_mtd_block_markbad;
++ mtd->_block_isreserved = spinand_mtd_block_isreserved;
++ mtd->_erase = spinand_mtd_erase;
++ mtd->_read = spinand_read;
++ mtd->_write = spinand_write;
++
++ /* After power up, all blocks are locked, so unlock it here. */
++ spinand_lock_block(spinand, BL_ALL_UNLOCKED);
++ /* Right now, we don't support ECC, so disable on-die ECC */
++ //spinand_disable_ecc(spinand);
++ spinand_enable_ecc(spinand);
++
++ return 0;
++
++err_free_buf:
++ kfree(spinand->buf);
++ return ret;
++}
++EXPORT_SYMBOL_GPL(spinand_init);
++/**
++ * spinand_cleanup - clean SPI NAND device
++ * @spinand: SPI NAND device structure
++ */
++void spinand_cleanup(struct spinand_device *spinand)
++{
++ struct nand_device *nand = &spinand->base;
++
++ spinand_manufacturer_cleanup(spinand);
++ kfree(spinand->buf);
++ nanddev_cleanup(nand);
++}
++EXPORT_SYMBOL_GPL(spinand_cleanup);
++
++MODULE_DESCRIPTION("SPI NAND framework");
++MODULE_AUTHOR("Peter Pan<peterpandong at micron.com>");
++MODULE_LICENSE("GPL v2");
+--- /dev/null
++++ b/drivers/mtd/nand/spi_nand/etron.c
+@@ -0,0 +1,147 @@
++/*
++ *
++ * Copyright (c) 2016-2017 Micron Technology, Inc.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/device.h>
++#include <linux/kernel.h>
++#include <linux/mtd/spinand.h>
++
++#define SPINAND_MFR_ETRON 0xD5
++
++struct etron_spinand_info {
++ char *name;
++ u8 dev_id;
++ struct nand_memory_organization memorg;
++ struct nand_ecc_req eccreq;
++ unsigned int rw_mode;
++};
++
++#define ETRON_SPI_NAND_INFO(nm, did, mo, er, rwm) \
++ { \
++ .name = (nm), \
++ .dev_id = (did), \
++ .memorg = mo, \
++ .eccreq = er, \
++ .rw_mode = (rwm) \
++ }
++
++static const struct etron_spinand_info etron_spinand_table[] = {
++ ETRON_SPI_NAND_INFO("ETNORxxxx", 0x11,
++ NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
++ NAND_ECCREQ(8, 512),
++ SPINAND_RW_COMMON),
++};
++
++static int etron_spinand_get_dummy(struct spinand_device *spinand,
++ struct spinand_op *op)
++{
++ u8 opcode = op->cmd;
++
++ switch (opcode) {
++ case SPINAND_CMD_READ_FROM_CACHE:
++ case SPINAND_CMD_READ_FROM_CACHE_FAST:
++ case SPINAND_CMD_READ_FROM_CACHE_X2:
++ case SPINAND_CMD_READ_FROM_CACHE_DUAL_IO:
++ case SPINAND_CMD_READ_FROM_CACHE_X4:
++ case SPINAND_CMD_READ_ID:
++ return 1;
++
++ case SPINAND_CMD_READ_FROM_CACHE_QUAD_IO:
++ return 2;
++
++ default:
++ return 0;
++ }
++}
++
++/**
++ * etron_spinand_scan_id_table - scan SPI NAND info in id table
++ * @spinand: SPI NAND device structure
++ * @id: point to manufacture id and device id
++ * Description:
++ * If found in id table, config device with table information.
++ */
++static bool etron_spinand_scan_id_table(struct spinand_device *spinand,
++ u8 dev_id)
++{
++ struct mtd_info *mtd = spinand_to_mtd(spinand);
++ struct nand_device *nand = mtd_to_nanddev(mtd);
++ struct etron_spinand_info *item;
++ unsigned int i;
++
++ for (i = 0; i < ARRAY_SIZE(etron_spinand_table); i++) {
++ item = (struct etron_spinand_info *)etron_spinand_table + i;
++ if (dev_id != item->dev_id)
++ continue;
++
++ nand->memorg = item->memorg;
++ nand->eccreq = item->eccreq;
++ spinand->rw_mode = item->rw_mode;
++
++ return true;
++ }
++
++ return false;
++}
++
++/**
++ * etron_spinand_detect - initialize device related part in spinand_device
++ * struct if it is Micron device.
++ * @spinand: SPI NAND device structure
++ */
++static bool etron_spinand_detect(struct spinand_device *spinand)
++{
++ u8 *id = spinand->id.data;
++
++ /*
++ * Micron SPI NAND read ID need a dummy byte,
++ * so the first byte in raw_id is dummy.
++ */
++ if (id[1] != SPINAND_MFR_ETRON)
++ return false;
++
++ return etron_spinand_scan_id_table(spinand, id[2]);
++}
++
++/**
++ * etron_spinand_prepare_op - Fix address for cache operation.
++ * @spinand: SPI NAND device structure
++ * @op: pointer to spinand_op struct
++ * @page: page address
++ * @column: column address
++ */
++static void etron_spinand_adjust_cache_op(struct spinand_device *spinand,
++ const struct nand_page_io_req *req,
++ struct spinand_op *op)
++{
++ struct nand_device *nand = spinand_to_nand(spinand);
++ unsigned int shift;
++
++ op->n_addr= 2;
++ op->addr[0] = op->addr[1];
++ op->addr[1] = op->addr[2];
++ op->addr[2] = 0;
++ op->dummy_bytes = etron_spinand_get_dummy(spinand, op);
++}
++
++static const struct spinand_manufacturer_ops etron_spinand_manuf_ops = {
++ .detect = etron_spinand_detect,
++ .adjust_cache_op = etron_spinand_adjust_cache_op,
++};
++
++const struct spinand_manufacturer etron_spinand_manufacturer = {
++ .id = SPINAND_MFR_ETRON,
++ .name = "Etron",
++ .ops = &etron_spinand_manuf_ops,
++};
+--- /dev/null
++++ b/drivers/mtd/nand/spi_nand/micron.c
+@@ -0,0 +1,153 @@
++/*
++ *
++ * Copyright (c) 2016-2017 Micron Technology, Inc.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/device.h>
++#include <linux/kernel.h>
++#include <linux/mtd/spinand.h>
++
++#define SPINAND_MFR_MICRON 0x2C
++
++struct micron_spinand_info {
++ char *name;
++ u8 dev_id;
++ struct nand_memory_organization memorg;
++ struct nand_ecc_req eccreq;
++ unsigned int rw_mode;
++};
++
++#define MICRON_SPI_NAND_INFO(nm, did, mo, er, rwm) \
++ { \
++ .name = (nm), \
++ .dev_id = (did), \
++ .memorg = mo, \
++ .eccreq = er, \
++ .rw_mode = (rwm) \
++ }
++
++static const struct micron_spinand_info micron_spinand_table[] = {
++ MICRON_SPI_NAND_INFO("MT29F2G01ABAGD", 0x24,
++ NAND_MEMORG(1, 2048, 128, 64, 2048, 2, 1, 1),
++ NAND_ECCREQ(8, 512),
++ SPINAND_RW_COMMON),
++};
++
++static int micron_spinand_get_dummy(struct spinand_device *spinand,
++ struct spinand_op *op)
++{
++ u8 opcode = op->cmd;
++
++ switch (opcode) {
++ case SPINAND_CMD_READ_FROM_CACHE:
++ case SPINAND_CMD_READ_FROM_CACHE_FAST:
++ case SPINAND_CMD_READ_FROM_CACHE_X2:
++ case SPINAND_CMD_READ_FROM_CACHE_DUAL_IO:
++ case SPINAND_CMD_READ_FROM_CACHE_X4:
++ case SPINAND_CMD_READ_ID:
++ return 1;
++
++ case SPINAND_CMD_READ_FROM_CACHE_QUAD_IO:
++ return 2;
++
++ default:
++ return 0;
++ }
++}
++
++/**
++ * micron_spinand_scan_id_table - scan SPI NAND info in id table
++ * @spinand: SPI NAND device structure
++ * @id: point to manufacture id and device id
++ * Description:
++ * If found in id table, config device with table information.
++ */
++static bool micron_spinand_scan_id_table(struct spinand_device *spinand,
++ u8 dev_id)
++{
++ struct mtd_info *mtd = spinand_to_mtd(spinand);
++ struct nand_device *nand = mtd_to_nanddev(mtd);
++ struct micron_spinand_info *item;
++ unsigned int i;
++
++ for (i = 0; i < ARRAY_SIZE(micron_spinand_table); i++) {
++ item = (struct micron_spinand_info *)micron_spinand_table + i;
++ if (dev_id != item->dev_id)
++ continue;
++
++ nand->memorg = item->memorg;
++ nand->eccreq = item->eccreq;
++ spinand->rw_mode = item->rw_mode;
++
++ return true;
++ }
++
++ return false;
++}
++
++/**
++ * micron_spinand_detect - initialize device related part in spinand_device
++ * struct if it is Micron device.
++ * @spinand: SPI NAND device structure
++ */
++static bool micron_spinand_detect(struct spinand_device *spinand)
++{
++ u8 *id = spinand->id.data;
++
++ /*
++ * Micron SPI NAND read ID need a dummy byte,
++ * so the first byte in raw_id is dummy.
++ */
++ if (id[1] != SPINAND_MFR_MICRON)
++ return false;
++
++ return micron_spinand_scan_id_table(spinand, id[2]);
++}
++
++/**
++ * micron_spinand_prepare_op - Fix address for cache operation.
++ * @spinand: SPI NAND device structure
++ * @op: pointer to spinand_op struct
++ * @page: page address
++ * @column: column address
++ */
++static void micron_spinand_adjust_cache_op(struct spinand_device *spinand,
++ const struct nand_page_io_req *req,
++ struct spinand_op *op)
++{
++ struct nand_device *nand = spinand_to_nand(spinand);
++ unsigned int shift;
++
++ /*
++ * No need to specify the plane number if there's only one plane per
++ * LUN.
++ */
++ if (nand->memorg.planes_per_lun < 2)
++ return;
++
++ /* The plane number is passed in MSB just above the column address */
++ shift = fls(nand->memorg.pagesize);
++ op->addr[(16 - shift) / 8] |= req->pos.plane << (shift % 8);
++ op->dummy_bytes = micron_spinand_get_dummy(spinand, op);
++}
++
++static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = {
++ .detect = micron_spinand_detect,
++ .adjust_cache_op = micron_spinand_adjust_cache_op,
++};
++
++const struct spinand_manufacturer micron_spinand_manufacturer = {
++ .id = SPINAND_MFR_MICRON,
++ .name = "Micron",
++ .ops = µn_spinand_manuf_ops,
++};
+--- /dev/null
++++ b/drivers/mtd/nand/spi_nand/nand_core.c
+@@ -0,0 +1,213 @@
++/*
++ * Copyright (c) 2017 Free Electrons
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Authors:
++ * Boris Brezillon <boris.brezillon at free-electrons.com>
++ * Peter Pan <peterpandong at micron.com>
++ */
++
++#define pr_fmt(fmt) "nand: " fmt
++
++#include <linux/mtd/nand.h>
++#include <linux/mtd/spinand.h>
++
++bool nanddev_isbad(struct nand_device *nand, const struct nand_pos *pos)
++{
++#if 1
++ if (nanddev_bbt_is_initialized(nand)) {
++ unsigned int entry=0;
++ int status=0;
++
++ entry = nanddev_bbt_pos_to_entry(nand, pos);
++ status = nanddev_bbt_get_block_status(nand, entry);
++ /* Lazy block status retrieval */
++ if (status == NAND_BBT_BLOCK_STATUS_UNKNOWN) {
++ if (nand->ops->isbad(nand, pos))
++ status = NAND_BBT_BLOCK_FACTORY_BAD;
++ else
++ status = NAND_BBT_BLOCK_GOOD;
++
++ nanddev_bbt_set_block_status(nand, entry, status);
++ }
++ //printk("status %llx,%x\n",nanddev_pos_to_offs(nand, pos),status);
++ if (status == NAND_BBT_BLOCK_WORN ||
++ status == NAND_BBT_BLOCK_FACTORY_BAD)
++ return true;
++
++ return false;
++ }
++#endif
++ return nand->ops->isbad(nand, pos);
++}
++EXPORT_SYMBOL_GPL(nanddev_isbad);
++
++/**
++ * nanddev_markbad - Write a bad block marker to a block
++ * @nand: NAND device
++ * @block: block to mark bad
++ *
++ * Mark a block bad. This function is updating the BBT if available and
++ * calls the low-level markbad hook (nand->ops->markbad()) if
++ * NAND_BBT_NO_OOB_BBM is not set.
++ *
++ * Return: 0 in case of success, a negative error code otherwise.
++ */
++int nanddev_markbad(struct nand_device *nand, const struct nand_pos *pos)
++{
++ struct mtd_info *mtd = nanddev_to_mtd(nand);
++ unsigned int entry;
++ int ret = 0;
++ if (nanddev_isbad(nand, pos))
++ return 0;
++
++ ret = nand->ops->markbad(nand, pos);
++ if (ret)
++ pr_warn("failed to write BBM to block @%llx (err = %d)\n",
++ nanddev_pos_to_offs(nand, pos), ret);
++
++ if (!nanddev_bbt_is_initialized(nand))
++ goto out;
++
++ entry = nanddev_bbt_pos_to_entry(nand, pos);
++ ret = nanddev_bbt_set_block_status(nand, entry, NAND_BBT_BLOCK_WORN);
++ if (ret)
++ goto out;
++
++ ret = nanddev_bbt_update(nand);
++
++out:
++ if (!ret)
++ mtd->ecc_stats.badblocks++;
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(nanddev_markbad);
++
++bool nanddev_isreserved(struct nand_device *nand, const struct nand_pos *pos)
++{
++ unsigned int entry;
++ int status;
++
++ if (!nanddev_bbt_is_initialized(nand))
++ return false;
++
++ /* Return info from the table */
++ entry = nanddev_bbt_pos_to_entry(nand, pos);
++ status = nanddev_bbt_get_block_status(nand, entry);
++ return status == NAND_BBT_BLOCK_RESERVED;
++}
++EXPORT_SYMBOL_GPL(nanddev_isreserved);
++
++/**
++ * nanddev_erase - Erase a NAND portion
++ * @nand: NAND device
++ * @block: eraseblock to erase
++ *
++ * Erase @block block if it's not bad.
++ *
++ * Return: 0 in case of success, a negative error code otherwise.
++ */
++
++int nanddev_erase(struct nand_device *nand, const struct nand_pos *pos)
++{
++ if (nanddev_isbad(nand, pos) || nanddev_isreserved(nand, pos)) {
++ //pr_warn("attempt to erase a bad/reserved block @%llx\n",
++ // nanddev_pos_to_offs(nand, pos));
++ return -EIO;
++ }
++
++ return nand->ops->erase(nand, pos);
++}
++EXPORT_SYMBOL_GPL(nanddev_erase);
++
++int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo)
++{
++ struct nand_device *nand = mtd_to_nanddev(mtd);
++ struct nand_pos pos, last;
++ int ret;
++
++ nanddev_offs_to_pos(nand, einfo->addr, &pos);
++ nanddev_offs_to_pos(nand, einfo->addr + einfo->len - 1, &last);
++ while (nanddev_pos_cmp(&pos, &last) <= 0) {
++ ret = nanddev_erase(nand, &pos);
++ if (ret) {
++ einfo->fail_addr = nanddev_pos_to_offs(nand, &pos);
++ einfo->state = MTD_ERASE_FAILED;
++ //printk("erase failed ....\n");
++ return ret;
++ }
++
++ nanddev_pos_next_eraseblock(nand, &pos);
++ }
++
++ einfo->state = MTD_ERASE_DONE;
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(nanddev_mtd_erase);
++
++/**
++ * nanddev_init - Initialize a NAND device
++ * @nand: NAND device
++ * @memorg: NAND memory organization descriptor
++ * @ops: NAND device operations
++ *
++ * Initialize a NAND device object. Consistency checks are done on @memorg and
++ * @ops.
++ *
++ * Return: 0 in case of success, a negative error code otherwise.
++ */
++int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
++ struct module *owner)
++{
++ struct mtd_info *mtd = nanddev_to_mtd(nand);
++ struct nand_memory_organization *memorg = nanddev_get_memorg(nand);
++
++ if (!nand || !ops)
++ return -EINVAL;
++
++ if (!ops->erase || !ops->markbad || !ops->isbad)
++ return -EINVAL;
++
++ if (!memorg->bits_per_cell || !memorg->pagesize ||
++ !memorg->pages_per_eraseblock || !memorg->eraseblocks_per_lun ||
++ !memorg->planes_per_lun || !memorg->luns_per_target ||
++ !memorg->ntargets)
++ return -EINVAL;
++
++ nand->rowconv.eraseblock_addr_shift = fls(memorg->pagesize);
++ nand->rowconv.lun_addr_shift = fls(memorg->eraseblocks_per_lun) +
++ nand->rowconv.eraseblock_addr_shift;
++
++ nand->ops = ops;
++
++ mtd->type = memorg->bits_per_cell == 1 ?
++ MTD_NANDFLASH : MTD_MLCNANDFLASH;
++ mtd->flags = MTD_CAP_NANDFLASH;
++ mtd->erasesize = memorg->pagesize * memorg->pages_per_eraseblock;
++ mtd->writesize = memorg->pagesize;
++ mtd->writebufsize = memorg->pagesize;
++ mtd->oobsize = memorg->oobsize;
++ mtd->size = nanddev_size(nand);
++ mtd->owner = owner;
++
++ return nanddev_bbt_init(nand);
++}
++EXPORT_SYMBOL_GPL(nanddev_init);
++
++void nanddev_cleanup(struct nand_device *nand)
++{
++ if (nanddev_bbt_is_initialized(nand))
++ nanddev_bbt_cleanup(nand);
++}
++EXPORT_SYMBOL_GPL(nanddev_cleanup);
+--- /dev/null
++++ b/include/linux/mtd/spinand.h
+@@ -0,0 +1,764 @@
++/*
++ *
++ * Copyright (c) 2016-2017 Micron Technology, Inc.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++#ifndef __LINUX_MTD_SPINAND_H
++#define __LINUX_MTD_SPINAND_H
++
++#include <linux/mutex.h>
++#include <linux/bitops.h>
++#include <linux/device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/of.h>
++
++/**
++ * Standard SPI NAND flash commands
++ */
++#define SPINAND_CMD_RESET 0xff
++#define SPINAND_CMD_GET_FEATURE 0x0f
++#define SPINAND_CMD_SET_FEATURE 0x1f
++#define SPINAND_CMD_PAGE_READ 0x13
++#define SPINAND_CMD_READ_FROM_CACHE 0x03
++#define SPINAND_CMD_READ_FROM_CACHE_FAST 0x0b
++#define SPINAND_CMD_READ_FROM_CACHE_X2 0x3b
++#define SPINAND_CMD_READ_FROM_CACHE_DUAL_IO 0xbb
++#define SPINAND_CMD_READ_FROM_CACHE_X4 0x6b
++#define SPINAND_CMD_READ_FROM_CACHE_QUAD_IO 0xeb
++#define SPINAND_CMD_BLK_ERASE 0xd8
++#define SPINAND_CMD_PROG_EXC 0x10
++#define SPINAND_CMD_PROG_LOAD 0x02
++#define SPINAND_CMD_PROG_LOAD_RDM_DATA 0x84
++#define SPINAND_CMD_PROG_LOAD_X4 0x32
++#define SPINAND_CMD_PROG_LOAD_RDM_DATA_X4 0x34
++#define SPINAND_CMD_READ_ID 0x9f
++#define SPINAND_CMD_WR_DISABLE 0x04
++#define SPINAND_CMD_WR_ENABLE 0x06
++
++/* feature register */
++#define REG_BLOCK_LOCK 0xa0
++#define REG_CFG 0xb0
++#define REG_STATUS 0xc0
++
++/* status register */
++#define STATUS_OIP_MASK BIT(0)
++#define STATUS_CRBSY_MASK BIT(7)
++#define STATUS_READY 0
++#define STATUS_BUSY BIT(0)
++
++#define STATUS_E_FAIL_MASK BIT(2)
++#define STATUS_E_FAIL BIT(2)
++
++#define STATUS_P_FAIL_MASK BIT(3)
++#define STATUS_P_FAIL BIT(3)
++
++/* configuration register */
++#define CFG_ECC_MASK BIT(4)
++#define CFG_ECC_ENABLE BIT(4)
++
++/* block lock register */
++#define BL_ALL_UNLOCKED 0X00
++
++struct spinand_op;
++struct spinand_device;
++struct nand_device;
++
++/**
++ * struct nand_memory_organization - memory organization structure
++ * @bits_per_cell: number of bits per NAND cell
++ * @pagesize: page size
++ * @oobsize: OOB area size
++ * @pages_per_eraseblock: number of pages per eraseblock
++ * @eraseblocks_per_die: number of eraseblocks per die
++ * @ndies: number of dies
++ */
++struct nand_memory_organization {
++ unsigned int bits_per_cell;
++ unsigned int pagesize;
++ unsigned int oobsize;
++ unsigned int pages_per_eraseblock;
++ unsigned int eraseblocks_per_lun;
++ unsigned int planes_per_lun;
++ unsigned int luns_per_target;
++ unsigned int ntargets;
++};
++
++#define NAND_MEMORG(bpc, ps, os, ppe, epl, ppl, lpt, nt) \
++ { \
++ .bits_per_cell = (bpc), \
++ .pagesize = (ps), \
++ .oobsize = (os), \
++ .pages_per_eraseblock = (ppe), \
++ .eraseblocks_per_lun = (epl), \
++ .planes_per_lun = (ppl), \
++ .luns_per_target = (lpt), \
++ .ntargets = (nt), \
++ }
++
++/**
++ * struct nand_bbt - bad block table structure
++ * @cache: in memory BBT cache
++ */
++struct nand_bbt {
++ unsigned char *cache;
++};
++
++struct nand_row_converter {
++ unsigned int lun_addr_shift;
++ unsigned int eraseblock_addr_shift;
++};
++
++struct nand_pos {
++ unsigned int target;
++ unsigned int lun;
++ unsigned int plane;
++ unsigned int eraseblock;
++ unsigned int page;
++};
++
++struct nand_page_io_req {
++ struct nand_pos pos;
++ unsigned int dataoffs;
++ unsigned int datalen;
++ union {
++ const void *out;
++ void *in;
++ } databuf;
++ unsigned int ooboffs;
++ unsigned int ooblen;
++ union {
++ const void *out;
++ void *in;
++ } oobbuf;
++};
++/**
++ * struct nand_ops - NAND operations
++ * @erase: erase a specific block
++ * @markbad: mark a specific block bad
++ */
++struct nand_ops {
++ int (*erase)(struct nand_device *nand, const struct nand_pos *pos);
++ int (*markbad)(struct nand_device *nand, const struct nand_pos *pos);
++ bool (*isbad)(struct nand_device *nand, const struct nand_pos *pos);
++};
++
++struct nand_ecc_req {
++ unsigned int strength;
++ unsigned int step_size;
++};
++
++#define NAND_ECCREQ(str, stp) { .strength = (str), .step_size = (stp) }
++
++struct nand_device{
++ struct mtd_info mtd;
++ struct nand_memory_organization memorg;
++ struct nand_ecc_req eccreq;
++ struct nand_row_converter rowconv;
++ struct nand_bbt bbt;
++ const struct nand_ops *ops;
++};
++
++#define SPINAND_MAX_ID_LEN 4
++
++/**
++ * struct spinand_id - SPI NAND id structure
++ * @data: buffer containing the id bytes. Currently 4 bytes large, but can
++ * be extended if required.
++ * @len: ID length
++ */
++struct spinand_id {
++ u8 data[SPINAND_MAX_ID_LEN];
++ int len;
++};
++
++/**
++ * struct spinand_controller_ops - SPI NAND controller operations
++ * @exec_op: executute SPI NAND operation
++ */
++struct spinand_controller_ops {
++ int (*exec_op)(struct spinand_device *spinand,
++ struct spinand_op *op);
++};
++
++
++/**
++ * struct manufacurer_ops - SPI NAND manufacturer specified operations
++ * @detect: detect SPI NAND device, should bot be NULL.
++ * ->detect() implementation for manufacturer A never sends
++ * any manufacturer specific SPI command to a SPI NAND from
++ * manufacturer B, so the proper way is to decode the raw id
++ * data in spinand->id.data first, if manufacture ID dismatch,
++ * return directly and let others to detect.
++ * @init: initialize SPI NAND device.
++ * @cleanup: clean SPI NAND device footprint.
++ * @prepare_op: prepara read/write operation.
++ */
++struct spinand_manufacturer_ops {
++ bool (*detect)(struct spinand_device *spinand);
++ int (*init)(struct spinand_device *spinand);
++ void (*cleanup)(struct spinand_device *spinand);
++ void (*adjust_cache_op)(struct spinand_device *spinand,
++ const struct nand_page_io_req *req,
++ struct spinand_op *op);
++};
++
++/**
++ * struct spinand_manufacturer - SPI NAND manufacturer instance
++ * @id: manufacturer ID
++ * @name: manufacturer name
++ * @ops: point to manufacturer operations
++ */
++struct spinand_manufacturer {
++ u8 id;
++ char *name;
++ const struct spinand_manufacturer_ops *ops;
++};
++
++extern const struct spinand_manufacturer micron_spinand_manufacturer;
++extern const struct spinand_manufacturer etron_spinand_manufacturer;
++extern const struct spinand_manufacturer paragon_spinand_manufacturer;
++extern const struct spinand_manufacturer giga_spinand_manufacturer;
++
++#define SPINAND_CAP_RD_X1 BIT(0)
++#define SPINAND_CAP_RD_X2 BIT(1)
++#define SPINAND_CAP_RD_X4 BIT(2)
++#define SPINAND_CAP_RD_DUAL BIT(3)
++#define SPINAND_CAP_RD_QUAD BIT(4)
++#define SPINAND_CAP_WR_X1 BIT(5)
++#define SPINAND_CAP_WR_X2 BIT(6)
++#define SPINAND_CAP_WR_X4 BIT(7)
++#define SPINAND_CAP_WR_DUAL BIT(8)
++#define SPINAND_CAP_WR_QUAD BIT(9)
++
++/**
++ * struct spinand_controller - SPI NAND controller instance
++ * @ops: point to controller operations
++ * @caps: controller capabilities
++ */
++struct spinand_controller {
++ struct spinand_controller_ops *ops;
++ u32 caps;
++};
++
++/**
++ * struct spinand_device - SPI NAND device instance
++ * @base: NAND device instance
++ * @bbp: internal bad block pattern descriptor
++ * @lock: protection lock
++ * @id: ID structure
++ * @read_cache_op: Opcode of read from cache
++ * @write_cache_op: Opcode of program load
++ * @buf: buffer for read/write data
++ * @oobbuf: buffer for read/write oob
++ * @rw_mode: read/write mode of SPI NAND device
++ * @controller: SPI NAND controller instance
++ * @manufacturer: SPI NAND manufacturer instance, describe
++ * manufacturer related objects
++ */
++struct spinand_device {
++ struct nand_device base;
++ struct mutex lock;
++ struct spinand_id id;
++ u8 read_cache_op;
++ u8 write_cache_op;
++ u8 *buf;
++ u8 *oobbuf;
++ u32 rw_mode;
++ struct {
++ struct spinand_controller *controller;
++ void *priv;
++ } controller;
++ struct {
++ const struct spinand_manufacturer *manu;
++ void *priv;
++ } manufacturer;
++};
++
++/**
++ * struct nand_io_iter - NAND I/O iterator
++ * @req: current I/O request
++ * @oobbytes_per_page: maximun oob bytes per page
++ * @dataleft: remaining number of data bytes to read/write
++ * @oobleft: remaining number of OOB bytes to read/write
++ */
++struct nand_io_iter {
++ struct nand_page_io_req req;
++ unsigned int oobbytes_per_page;
++ unsigned int dataleft;
++ unsigned int oobleft;
++};
++
++/**
++ * mtd_to_nanddev - Get the NAND device attached to the MTD instance
++ * @mtd: MTD instance
++ *
++ * Return: the NAND device embedding @mtd.
++ */
++static inline struct nand_device *mtd_to_nanddev(struct mtd_info *mtd)
++{
++ return container_of(mtd, struct nand_device, mtd);
++}
++/**
++ * nanddev_to_mtd - Get the MTD device attached to a NAND device
++ * @nand: NAND device
++ *
++ * Return: the MTD device embedded in @nand.
++ */
++static inline struct mtd_info *nanddev_to_mtd(struct nand_device *nand)
++{
++ return &nand->mtd;
++}
++
++/**
++ * mtd_to_spinand - Get the SPI NAND device attached to the MTD instance
++ * @mtd: MTD instance
++ *
++ * Returns the SPI NAND device attached to @mtd.
++ */
++static inline struct spinand_device *mtd_to_spinand(struct mtd_info *mtd)
++{
++ return container_of(mtd_to_nanddev(mtd), struct spinand_device, base);
++}
++
++/**
++ * spinand_to_mtd - Get the MTD device attached to the SPI NAND device
++ * @spinand: SPI NAND device
++ *
++ * Returns the MTD device attached to @spinand.
++ */
++static inline struct mtd_info *spinand_to_mtd(struct spinand_device *spinand)
++{
++ return nanddev_to_mtd(&spinand->base);
++}
++
++/**
++ * nand_to_spinand - Get the SPI NAND device embedding an NAND object
++ * @nand: NAND object
++ *
++ * Returns the SPI NAND device embedding @nand.
++ */
++static inline struct spinand_device *nand_to_spinand(struct nand_device *nand)
++{
++ return container_of(nand, struct spinand_device, base);
++}
++
++/**
++ * spinand_to_nand - Get the NAND device embedded in a SPI NAND object
++ * @spinand: SPI NAND device
++ *
++ * Returns the NAND device embedded in @spinand.
++ */
++static inline struct nand_device *
++spinand_to_nand(struct spinand_device *spinand)
++{
++ return &spinand->base;
++}
++
++/**
++ * nanddev_set_of_node - Attach a DT node to a NAND device
++ * @nand: NAND device
++ * @np: DT node
++ *
++ * Attach a DT node to a NAND device.
++ */
++static inline void nanddev_set_of_node(struct nand_device *nand,
++ struct device_node *np)
++{
++ mtd_set_of_node(&nand->mtd, np);
++}
++
++/**
++ * spinand_set_of_node - Attach a DT node to a SPI NAND device
++ * @spinand: SPI NAND device
++ * @np: DT node
++ *
++ * Attach a DT node to a SPI NAND device.
++ */
++static inline void spinand_set_of_node(struct spinand_device *spinand,
++ struct device_node *np)
++{
++ nanddev_set_of_node(&spinand->base, np);
++}
++
++#define SPINAND_MAX_ADDR_LEN 4
++
++/**
++ * struct spinand_op - SPI NAND operation description
++ * @cmd: opcode to send
++ * @n_addr: address bytes
++ * @addr_nbits: number of bit used to transfer address
++ * @dummy_types: dummy bytes followed address
++ * @addr: address or dummy bytes buffer
++ * @n_tx: size of tx_buf
++ * @tx_buf: data to be written
++ * @n_rx: size of rx_buf
++ * @rx_buf: data to be read
++ * @data_nbits: number of bit used to transfer data
++ */
++struct spinand_op {
++ u8 cmd;
++ u8 n_addr;
++ u8 addr_nbits;
++ u8 dummy_bytes;
++ u8 addr[SPINAND_MAX_ADDR_LEN];
++ u32 n_tx;
++ const u8 *tx_buf;
++ u32 n_rx;
++ u8 *rx_buf;
++ u8 data_nbits;
++};
++/**
++ * nanddev_neraseblocks - Get the total number of erasablocks
++ * @nand: NAND device
++ *
++ * Return: the number of eraseblocks exposed by @nand.
++ */
++static inline unsigned int nanddev_neraseblocks(const struct nand_device *nand)
++{
++ return (u64)nand->memorg.luns_per_target *
++ nand->memorg.eraseblocks_per_lun *
++ nand->memorg.ntargets;
++}
++
++/* BBT related functions */
++enum nand_bbt_block_status {
++ NAND_BBT_BLOCK_STATUS_UNKNOWN,
++ NAND_BBT_BLOCK_GOOD,
++ NAND_BBT_BLOCK_WORN,
++ NAND_BBT_BLOCK_RESERVED,
++ NAND_BBT_BLOCK_FACTORY_BAD,
++ NAND_BBT_BLOCK_NUM_STATUS,
++};
++int nanddev_bbt_init(struct nand_device *nand);
++void nanddev_bbt_cleanup(struct nand_device *nand);
++int nanddev_bbt_update(struct nand_device *nand);
++int nanddev_bbt_get_block_status(const struct nand_device *nand,
++ unsigned int entry);
++int nanddev_bbt_set_block_status(struct nand_device *nand, unsigned int entry,
++ enum nand_bbt_block_status status);
++
++/* SPI NAND supported OP mode */
++#define SPINAND_RD_X1 BIT(0)
++#define SPINAND_RD_X2 BIT(1)
++#define SPINAND_RD_X4 BIT(2)
++#define SPINAND_RD_DUAL BIT(3)
++#define SPINAND_RD_QUAD BIT(4)
++#define SPINAND_WR_X1 BIT(5)
++#define SPINAND_WR_X2 BIT(6)
++#define SPINAND_WR_X4 BIT(7)
++#define SPINAND_WR_DUAL BIT(8)
++#define SPINAND_WR_QUAD BIT(9)
++
++#define SPINAND_RD_COMMON (SPINAND_RD_X1 | SPINAND_RD_X2 | \
++ SPINAND_RD_X4 | SPINAND_RD_DUAL | \
++ SPINAND_RD_QUAD)
++#define SPINAND_WR_COMMON (SPINAND_WR_X1 | SPINAND_WR_X4)
++#define SPINAND_RW_COMMON (SPINAND_RD_COMMON | SPINAND_WR_COMMON)
++
++struct spinand_device *devm_spinand_alloc(struct device *dev);
++int spinand_init(struct spinand_device *spinand, struct module *owner);
++void spinand_cleanup(struct spinand_device *spinand);
++
++/**
++ * nanddev_page_size - Get NAND page size
++ * @nand: NAND device
++ *
++ * Return: the page size.
++ */
++static inline size_t nanddev_page_size(const struct nand_device *nand)
++{
++ return nand->memorg.pagesize;
++}
++
++/**
++ * nanddev_per_page_oobsize - Get NAND OOB size
++ * @nand: NAND device
++ *
++ * Return: the OOB size.
++ */
++static inline unsigned int
++nanddev_per_page_oobsize(const struct nand_device *nand)
++{
++ return nand->memorg.oobsize;
++}
++
++/**
++ * nanddev_pages_per_eraseblock - Get the number of pages per eraseblock
++ * @nand: NAND device
++ *
++ * Return: the number of pages per eraseblock.
++ */
++static inline unsigned int
++nanddev_pages_per_eraseblock(const struct nand_device *nand)
++{
++ return nand->memorg.pages_per_eraseblock;
++}
++
++/**
++ * nanddev_per_page_oobsize - Get NAND erase block size
++ * @nand: NAND device
++ *
++ * Return: the eraseblock size.
++ */
++static inline size_t nanddev_eraseblock_size(const struct nand_device *nand)
++{
++ return nand->memorg.pagesize * nand->memorg.pages_per_eraseblock;
++}
++
++static inline u64 nanddev_target_size(const struct nand_device *nand)
++{
++ return (u64)nand->memorg.luns_per_target *
++ nand->memorg.eraseblocks_per_lun *
++ nand->memorg.pages_per_eraseblock *
++ nand->memorg.pagesize;
++}
++
++/**
++ * nanddev_ntarget - Get the total of targets
++ * @nand: NAND device
++ *
++ * Return: the number of dies exposed by @nand.
++ */
++static inline unsigned int nanddev_ntargets(const struct nand_device *nand)
++{
++ return nand->memorg.ntargets;
++}
++
++/**
++ * nanddev_size - Get NAND size
++ * @nand: NAND device
++ *
++ * Return: the total size exposed of @nand.
++ */
++static inline u64 nanddev_size(const struct nand_device *nand)
++{
++ return nanddev_target_size(nand) * nanddev_ntargets(nand);
++}
++
++/**
++ * nanddev_get_memorg - Extract memory organization info from a NAND device
++ * @nand: NAND device
++ *
++ * This can be used by the upper layer to fill the memorg info before calling
++ * nanddev_init().
++ *
++ * Return: the memorg object embedded in the NAND device.
++ */
++static inline struct nand_memory_organization *
++nanddev_get_memorg(struct nand_device *nand)
++{
++ return &nand->memorg;
++}
++
++
++static inline unsigned int nanddev_pos_to_row(struct nand_device *nand,
++ const struct nand_pos *pos)
++{
++ return (pos->lun << nand->rowconv.lun_addr_shift) |
++ (pos->eraseblock << nand->rowconv.eraseblock_addr_shift) |
++ pos->page;
++}
++
++
++static inline unsigned int nanddev_offs_to_pos(struct nand_device *nand,
++ loff_t offs,
++ struct nand_pos *pos)
++{
++ unsigned int pageoffs;
++ u64 tmp = offs;
++
++ pageoffs = do_div(tmp, nand->memorg.pagesize);
++ pos->page = do_div(tmp, nand->memorg.pages_per_eraseblock);
++ pos->eraseblock = do_div(tmp, nand->memorg.eraseblocks_per_lun);
++ pos->plane = pos->eraseblock % nand->memorg.planes_per_lun;
++ pos->lun = do_div(tmp, nand->memorg.luns_per_target);
++ pos->target = tmp;
++
++ return pageoffs;
++}
++
++static inline int nanddev_pos_cmp(const struct nand_pos *a,
++ const struct nand_pos *b)
++{
++ if (a->target != b->target)
++ return a->target < b->target ? -1 : 1;
++
++ if (a->lun != b->lun)
++ return a->lun < b->lun ? -1 : 1;
++
++ if (a->eraseblock != b->eraseblock)
++ return a->eraseblock < b->eraseblock ? -1 : 1;
++
++ if (a->page != b->page)
++ return a->page < b->page ? -1 : 1;
++
++ return 0;
++}
++
++static inline void nanddev_pos_next_target(struct nand_device *nand,
++ struct nand_pos *pos)
++{
++ pos->page = 0;
++ pos->plane = 0;
++ pos->eraseblock = 0;
++ pos->lun = 0;
++ pos->target++;
++}
++
++static inline void nanddev_pos_next_lun(struct nand_device *nand,
++ struct nand_pos *pos)
++{
++ if (pos->lun >= nand->memorg.luns_per_target - 1)
++ return nanddev_pos_next_target(nand, pos);
++
++ pos->lun++;
++ pos->page = 0;
++ pos->plane = 0;
++ pos->eraseblock = 0;
++}
++
++static inline void nanddev_pos_next_eraseblock(struct nand_device *nand,
++ struct nand_pos *pos)
++{
++ if (pos->eraseblock >= nand->memorg.eraseblocks_per_lun - 1)
++ return nanddev_pos_next_lun(nand, pos);
++
++ pos->eraseblock++;
++ pos->page = 0;
++ pos->plane = pos->eraseblock % nand->memorg.planes_per_lun;
++}
++
++static inline loff_t nanddev_pos_to_offs(struct nand_device *nand,
++ const struct nand_pos *pos)
++{
++ unsigned int npages;
++
++ npages = pos->page +
++ ((pos->eraseblock +
++ (pos->lun +
++ (pos->target * nand->memorg.luns_per_target)) *
++ nand->memorg.eraseblocks_per_lun) *
++ nand->memorg.pages_per_eraseblock);
++
++ return (loff_t)npages * nand->memorg.pagesize;
++}
++
++static inline void nanddev_pos_next_page(struct nand_device *nand,
++ struct nand_pos *pos)
++{
++ if (pos->page >= nand->memorg.pages_per_eraseblock - 1)
++ return nanddev_pos_next_eraseblock(nand, pos);
++
++ pos->page++;
++}
++
++/**
++ * nand_io_iter_init - Initialize a NAND I/O iterator
++ * @nand: NAND device
++ * @offs: absolute offset
++ * @req: MTD request
++ * @iter: page iterator
++ */
++static inline void nanddev_io_iter_init(struct nand_device *nand,
++ loff_t offs, struct mtd_oob_ops *req,
++ struct nand_io_iter *iter)
++{
++ struct mtd_info *mtd = nanddev_to_mtd(nand);
++
++ iter->req.dataoffs = nanddev_offs_to_pos(nand, offs, &iter->req.pos);
++ iter->req.ooboffs = req->ooboffs;
++ iter->oobbytes_per_page = mtd_oobavail(mtd, req);
++ iter->dataleft = req->len;
++ iter->oobleft = req->ooblen;
++ iter->req.databuf.in = req->datbuf;
++ iter->req.datalen = min_t(unsigned int,
++ nand->memorg.pagesize - iter->req.dataoffs,
++ iter->dataleft);
++ iter->req.oobbuf.in = req->oobbuf;
++ iter->req.ooblen = min_t(unsigned int,
++ iter->oobbytes_per_page - iter->req.ooboffs,
++ iter->oobleft);
++}
++
++/**
++ * nand_io_iter_next_page - Move to the next page
++ * @nand: NAND device
++ * @iter: page iterator
++ */
++static inline void nanddev_io_iter_next_page(struct nand_device *nand,
++ struct nand_io_iter *iter)
++{
++ nanddev_pos_next_page(nand, &iter->req.pos);
++ iter->dataleft -= iter->req.datalen;
++ iter->req.databuf.in += iter->req.datalen;
++ iter->oobleft -= iter->req.ooblen;
++ iter->req.oobbuf.in += iter->req.ooblen;
++ iter->req.dataoffs = 0;
++ iter->req.ooboffs = 0;
++ iter->req.datalen = min_t(unsigned int, nand->memorg.pagesize,
++ iter->dataleft);
++ iter->req.ooblen = min_t(unsigned int, iter->oobbytes_per_page,
++ iter->oobleft);
++}
++
++/**
++ * nand_io_iter_end - Should end iteration or not
++ * @nand: NAND device
++ * @iter: page iterator
++ */
++static inline bool nanddev_io_iter_end(struct nand_device *nand,
++ const struct nand_io_iter *iter)
++{
++ if (iter->dataleft || iter->oobleft)
++ return false;
++
++ return true;
++}
++
++/**
++ * nand_io_for_each_page - Iterate over all NAND pages contained in an MTD I/O
++ * request
++ * @nand: NAND device
++ * @start: start address to read/write
++ * @req: MTD I/O request
++ * @iter: page iterator
++ */
++#define nanddev_io_for_each_page(nand, start, req, iter) \
++ for (nanddev_io_iter_init(nand, start, req, iter); \
++ !nanddev_io_iter_end(nand, iter); \
++ nanddev_io_iter_next_page(nand, iter))
++
++static inline unsigned int nanddev_bbt_pos_to_entry(struct nand_device *nand,
++ const struct nand_pos *pos)
++{
++ return pos->eraseblock;
++}
++
++static inline bool nanddev_bbt_is_initialized(struct nand_device *nand)
++{
++ return !!nand->bbt.cache;
++}
++
++int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
++ struct module *owner);
++void nanddev_cleanup(struct nand_device *nand);
++bool nanddev_isbad(struct nand_device *nand, const struct nand_pos *pos);
++bool nanddev_isreserved(struct nand_device *nand, const struct nand_pos *pos);
++int nanddev_erase(struct nand_device *nand, const struct nand_pos *pos);
++int nanddev_markbad(struct nand_device *nand, const struct nand_pos *pos);
++
++/* MTD -> NAND helper functions. */
++int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo);
++
++
++#endif /* __LINUX_MTD_SPINAND_H */
+--- /dev/null
++++ b/drivers/mtd/nand/spi_nand/generic-spinand-controller.c
+@@ -0,0 +1,182 @@
++/*
++ * Copyright (c) 2016-2017 Micron Technology, Inc.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/spi/spi.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/spinand.h>
++
++struct gen_spinand_controller {
++ struct spinand_controller ctrl;
++ struct spi_device *spi;
++};
++
++#define to_gen_spinand_controller(c) \
++ container_of(c, struct gen_spinand_controller, ctrl)
++
++/*
++ * gen_spinand_controller_exec_op - to process a command to send to the
++ * SPI NAND by generic SPI bus
++ * @spinand: SPI NAND device structure
++ * @op: SPI NAND operation descriptor
++ */
++static int gen_spinand_controller_exec_op(struct spinand_device *spinand,
++ struct spinand_op *op)
++{
++ struct spi_message message;
++ struct spi_transfer x[3];
++ struct spinand_controller *spinand_controller;
++ struct gen_spinand_controller *controller;
++
++ spinand_controller = spinand->controller.controller;
++ controller = to_gen_spinand_controller(spinand_controller);
++ spi_message_init(&message);
++ memset(x, 0, sizeof(x));
++ x[0].len = 1;
++ x[0].tx_nbits = 1;
++ x[0].tx_buf = &op->cmd;
++ spi_message_add_tail(&x[0], &message);
++
++ if (op->n_addr + op->dummy_bytes) {
++ x[1].len = op->n_addr + op->dummy_bytes;
++ x[1].tx_nbits = op->addr_nbits;
++ x[1].tx_buf = op->addr;
++ //printk("cmd:%2X,naddr:%d,[%2X][%2X][%2X]\n",op->cmd,op->n_addr,op->addr[0],op->addr[1],op->addr[2]);
++ spi_message_add_tail(&x[1], &message);
++ }
++
++ if (op->n_tx) {
++ x[2].len = op->n_tx;
++ x[2].tx_nbits = op->data_nbits;
++ x[2].tx_buf = op->tx_buf;
++ spi_message_add_tail(&x[2], &message);
++ } else if (op->n_rx) {
++ x[2].len = op->n_rx;
++ x[2].rx_nbits = op->data_nbits;
++ x[2].rx_buf = op->rx_buf;
++ spi_message_add_tail(&x[2], &message);
++ }
++
++ return spi_sync(controller->spi, &message);
++}
++
++static struct spinand_controller_ops gen_spinand_controller_ops = {
++ .exec_op = gen_spinand_controller_exec_op,
++};
++extern int read_test(struct mtd_info *mtd,loff_t from,size_t len);
++extern int erase_test(struct mtd_info *mtd,uint64_t from,uint64_t len);
++extern int write_test(struct mtd_info *mtd,loff_t to,size_t len);
++extern int spinand_bbt_create(struct nand_device *nand );
++extern int mark_bad_test(struct mtd_info *mtd,loff_t offs);
++static int gen_spinand_controller_probe(struct spi_device *spi)
++{
++ struct spinand_device *spinand;
++ struct gen_spinand_controller *controller;
++ struct spinand_controller *spinand_controller;
++ struct device *dev = &spi->dev;
++ u16 mode = spi->mode;
++ int ret;
++
++ spinand = devm_spinand_alloc(dev);
++ if (IS_ERR(spinand)) {
++ ret = PTR_ERR(spinand);
++ goto out;
++ }
++
++ controller = devm_kzalloc(dev, sizeof(*controller), GFP_KERNEL);
++ if (!controller) {
++ ret = -ENOMEM;
++ goto out;
++ }
++
++ controller->spi = spi;
++ spinand_controller = &controller->ctrl;
++ spinand_controller->ops = &gen_spinand_controller_ops;
++ spinand_controller->caps = SPINAND_CAP_RD_X1 | SPINAND_CAP_WR_X1;
++
++ if ((mode & SPI_RX_QUAD) && (mode & SPI_TX_QUAD))
++ spinand_controller->caps |= SPINAND_CAP_RD_QUAD;
++
++ if ((mode & SPI_RX_DUAL) && (mode & SPI_TX_DUAL))
++ spinand_controller->caps |= SPINAND_CAP_RD_DUAL;
++
++ if (mode & SPI_RX_QUAD)
++ spinand_controller->caps |= SPINAND_CAP_RD_X4;
++
++ if (mode & SPI_RX_DUAL)
++ spinand_controller->caps |= SPINAND_CAP_RD_X2;
++
++ if (mode & SPI_TX_QUAD)
++ spinand_controller->caps |= SPINAND_CAP_WR_QUAD |
++ SPINAND_CAP_WR_X4;
++
++ if (mode & SPI_TX_DUAL)
++ spinand_controller->caps |= SPINAND_CAP_WR_DUAL |
++ SPINAND_CAP_WR_X2;
++
++ spinand->controller.controller = spinand_controller;
++ spi_set_drvdata(spi, spinand);
++
++ ret = spinand_init(spinand, THIS_MODULE);
++ if (ret)
++ goto out;
++
++ ret = mtd_device_register(spinand_to_mtd(spinand), NULL, 0);
++ struct nand_device *nand =spinand_to_nand(spinand);
++ spinand_bbt_create(nand);
++ //mark_bad_test(spinand_to_mtd(spinand),0x00);
++ /*
++ int i=0,status=0;
++ unsigned int entry=0;
++ struct nand_pos pos;
++ for(i=0;i<1024;i++){
++
++ erase_test(spinand_to_mtd(spinand),i*0x20000,0x20000);
++ }*/
++ //erase_test(spinand_to_mtd(spinand),0x00,0x20000);
++ //write_test(spinand_to_mtd(spinand),0x00,2048);
++ //read_test(spinand_to_mtd(spinand),0x00,2048);
++ //mark_bad_test(spinand_to_mtd(spinand),0);
++ //read_test(spinand_to_mtd(spinand),0x00,2048);
++out:
++ return ret;
++}
++
++static int gen_spinand_controller_remove(struct spi_device *spi)
++{
++ struct spinand_device *spinand = spi_get_drvdata(spi);
++ int ret;
++
++ ret = mtd_device_unregister(spinand_to_mtd(spinand));
++ if (ret)
++ return ret;
++
++ spinand_cleanup(spinand);
++
++ return 0;
++}
++
++static struct spi_driver gen_spinand_controller_driver = {
++ .driver = {
++ .name = "generic-spinand-controller",
++ .owner = THIS_MODULE,
++ },
++ .probe = gen_spinand_controller_probe,
++ .remove = gen_spinand_controller_remove,
++};
++module_spi_driver(gen_spinand_controller_driver);
++
++MODULE_DESCRIPTION("Generic SPI NAND controller");
++MODULE_AUTHOR("Peter Pan <peterpandong at micron.com>");
++MODULE_LICENSE("GPL v2");
+--- /dev/null
++++ b/drivers/mtd/nand/spi_nand/gigadevice.c
+@@ -0,0 +1,142 @@
++/*
++ *
++ * Copyright (c) 2016-2017 Micron Technology, Inc.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/device.h>
++#include <linux/kernel.h>
++#include <linux/mtd/spinand.h>
++
++#define SPINAND_MFR_GIGA 0xC8
++
++struct giga_spinand_info {
++ char *name;
++ u8 dev_id;
++ struct nand_memory_organization memorg;
++ struct nand_ecc_req eccreq;
++ unsigned int rw_mode;
++};
++
++#define GIGA_SPI_NAND_INFO(nm, did, mo, er, rwm) \
++ { \
++ .name = (nm), \
++ .dev_id = (did), \
++ .memorg = mo, \
++ .eccreq = er, \
++ .rw_mode = (rwm) \
++ }
++
++static const struct giga_spinand_info giga_spinand_table[] = {
++ GIGA_SPI_NAND_INFO("GIGAxxxx", 0xB1,
++ NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
++ NAND_ECCREQ(8, 512),
++ SPINAND_RW_COMMON),
++};
++
++static int giga_spinand_get_dummy(struct spinand_device *spinand,
++ struct spinand_op *op)
++{
++ u8 opcode = op->cmd;
++
++ switch (opcode) {
++ case SPINAND_CMD_READ_FROM_CACHE_FAST:
++ case SPINAND_CMD_READ_FROM_CACHE:
++ case SPINAND_CMD_READ_FROM_CACHE_X2:
++ case SPINAND_CMD_READ_FROM_CACHE_DUAL_IO:
++ case SPINAND_CMD_READ_FROM_CACHE_X4:
++ case SPINAND_CMD_READ_ID:
++ return 1;
++ case SPINAND_CMD_READ_FROM_CACHE_QUAD_IO:
++ return 2;
++
++ default:
++ return 0;
++ }
++}
++
++/**
++ * giga_spinand_scan_id_table - scan SPI NAND info in id table
++ * @spinand: SPI NAND device structure
++ * @id: point to manufacture id and device id
++ * Description:
++ * If found in id table, config device with table information.
++ */
++static bool giga_spinand_scan_id_table(struct spinand_device *spinand,
++ u8 dev_id)
++{
++ struct mtd_info *mtd = spinand_to_mtd(spinand);
++ struct nand_device *nand = mtd_to_nanddev(mtd);
++ struct giga_spinand_info *item;
++ unsigned int i;
++
++ for (i = 0; i < ARRAY_SIZE(giga_spinand_table); i++) {
++ item = (struct giga_spinand_info *)giga_spinand_table + i;
++ if (dev_id != item->dev_id)
++ continue;
++
++ nand->memorg = item->memorg;
++ nand->eccreq = item->eccreq;
++ spinand->rw_mode = item->rw_mode;
++
++ return true;
++ }
++
++ return false;
++}
++
++/**
++ * giga_spinand_detect - initialize device related part in spinand_device
++ * struct if it is Micron device.
++ * @spinand: SPI NAND device structure
++ */
++static bool giga_spinand_detect(struct spinand_device *spinand)
++{
++ u8 *id = spinand->id.data;
++
++ /*
++ * Micron SPI NAND read ID need a dummy byte,
++ * so the first byte in raw_id is dummy.
++ */
++ if (id[0] != SPINAND_MFR_GIGA)
++ return false;
++
++ return giga_spinand_scan_id_table(spinand, id[1]);
++}
++
++/**
++ * giga_spinand_prepare_op - Fix address for cache operation.
++ * @spinand: SPI NAND device structure
++ * @op: pointer to spinand_op struct
++ * @page: page address
++ * @column: column address
++ */
++static void giga_spinand_adjust_cache_op(struct spinand_device *spinand,
++ const struct nand_page_io_req *req,
++ struct spinand_op *op)
++{
++ struct nand_device *nand = spinand_to_nand(spinand);
++ unsigned int shift;
++
++ op->dummy_bytes = giga_spinand_get_dummy(spinand, op);
++}
++
++static const struct spinand_manufacturer_ops giga_spinand_manuf_ops = {
++ .detect = giga_spinand_detect,
++ .adjust_cache_op = giga_spinand_adjust_cache_op,
++};
++
++const struct spinand_manufacturer giga_spinand_manufacturer = {
++ .id = SPINAND_MFR_GIGA,
++ .name = "Giga",
++ .ops = &giga_spinand_manuf_ops,
++};
+--- /dev/null
++++ b/drivers/mtd/nand/spi_nand/paragon.c
+@@ -0,0 +1,147 @@
++/*
++ *
++ * Copyright (c) 2016-2017 Micron Technology, Inc.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/device.h>
++#include <linux/kernel.h>
++#include <linux/mtd/spinand.h>
++
++#define SPINAND_MFR_PARAGON 0xA1
++
++struct paragon_spinand_info {
++ char *name;
++ u8 dev_id;
++ struct nand_memory_organization memorg;
++ struct nand_ecc_req eccreq;
++ unsigned int rw_mode;
++};
++
++#define PARAGON_SPI_NAND_INFO(nm, did, mo, er, rwm) \
++ { \
++ .name = (nm), \
++ .dev_id = (did), \
++ .memorg = mo, \
++ .eccreq = er, \
++ .rw_mode = (rwm) \
++ }
++
++static const struct paragon_spinand_info paragon_spinand_table[] = {
++ PARAGON_SPI_NAND_INFO("PARAGONxxxx", 0xe1,
++ NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
++ NAND_ECCREQ(8, 512),
++ SPINAND_RW_COMMON),
++};
++
++static int paragon_spinand_get_dummy(struct spinand_device *spinand,
++ struct spinand_op *op)
++{
++ u8 opcode = op->cmd;
++
++ switch (opcode) {
++ case SPINAND_CMD_READ_FROM_CACHE_FAST:
++ case SPINAND_CMD_READ_FROM_CACHE:
++ case SPINAND_CMD_READ_FROM_CACHE_X2:
++ case SPINAND_CMD_READ_FROM_CACHE_DUAL_IO:
++ case SPINAND_CMD_READ_FROM_CACHE_X4:
++ case SPINAND_CMD_READ_ID:
++ return 1;
++
++ case SPINAND_CMD_READ_FROM_CACHE_QUAD_IO:
++ return 2;
++
++ default:
++ return 0;
++ }
++}
++
++/**
++ * paragon_spinand_scan_id_table - scan SPI NAND info in id table
++ * @spinand: SPI NAND device structure
++ * @id: point to manufacture id and device id
++ * Description:
++ * If found in id table, config device with table information.
++ */
++static bool paragon_spinand_scan_id_table(struct spinand_device *spinand,
++ u8 dev_id)
++{
++ struct mtd_info *mtd = spinand_to_mtd(spinand);
++ struct nand_device *nand = mtd_to_nanddev(mtd);
++ struct paragon_spinand_info *item;
++ unsigned int i;
++
++ for (i = 0; i < ARRAY_SIZE(paragon_spinand_table); i++) {
++ item = (struct paragon_spinand_info *)paragon_spinand_table + i;
++ if (dev_id != item->dev_id)
++ continue;
++
++ nand->memorg = item->memorg;
++ nand->eccreq = item->eccreq;
++ spinand->rw_mode = item->rw_mode;
++
++ return true;
++ }
++
++ return false;
++}
++
++/**
++ * paragon_spinand_detect - initialize device related part in spinand_device
++ * struct if it is Micron device.
++ * @spinand: SPI NAND device structure
++ */
++static bool paragon_spinand_detect(struct spinand_device *spinand)
++{
++ u8 *id = spinand->id.data;
++
++ /*
++ * Micron SPI NAND read ID need a dummy byte,
++ * so the first byte in raw_id is dummy.
++ */
++ if (id[1] != SPINAND_MFR_PARAGON)
++ return false;
++
++ return paragon_spinand_scan_id_table(spinand, id[2]);
++}
++
++/**
++ * paragon_spinand_prepare_op - Fix address for cache operation.
++ * @spinand: SPI NAND device structure
++ * @op: pointer to spinand_op struct
++ * @page: page address
++ * @column: column address
++ */
++static void paragon_spinand_adjust_cache_op(struct spinand_device *spinand,
++ const struct nand_page_io_req *req,
++ struct spinand_op *op)
++{
++ struct nand_device *nand = spinand_to_nand(spinand);
++ unsigned int shift;
++
++ op->n_addr= 2;
++ op->addr[0] = op->addr[1];
++ op->addr[1] = op->addr[2];
++ op->addr[2] = 0;
++ op->dummy_bytes = paragon_spinand_get_dummy(spinand, op);
++}
++
++static const struct spinand_manufacturer_ops paragon_spinand_manuf_ops = {
++ .detect = paragon_spinand_detect,
++ .adjust_cache_op = paragon_spinand_adjust_cache_op,
++};
++
++const struct spinand_manufacturer paragon_spinand_manufacturer = {
++ .id = SPINAND_MFR_PARAGON,
++ .name = "Paragon",
++ .ops = ¶gon_spinand_manuf_ops,
++};
--
2.7.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
http://lists.infradead.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list