[OpenWrt-Devel] [PATCH] ath79: Add support for TL-WR740N/NDv2, TL-MR3220v1, TL-MR3420v1
Mathias Kresin
dev at kresin.me
Tue Jun 26 12:28:34 EDT 2018
Hey Dmitry,
find my comments inline. Please take care to fix the outlined issues
for all dts.
2018-06-26 16:47 GMT+02:00 Смирнов Дмитрий <dioptimizer at hotmail.com>:
>
> From dfcb42807ddd384482ea0dc18d42a8e4774b709e Mon Sep 17 00:00:00 2001
> From: Deoptim <dioptimizer at hotmail.com>
Please use your full name here.
> Date: Tue, 26 Jun 2018 17:01:47 +0300
> Subject: [OpenWrt-Devel] [PATCH] ath79: Add support for TL-WR740N/NDv2,TL-MR3220v1,TL-MR3420v1
>
> Its common AP99(AR7241) platform with following devices:
> TP-Link TL-WR740N/ND v2 (SoC AR7241 / Wifi AR9287 / without USB)
> TP-Link TL-MR3220 v1 (SoC AR7241 / Wifi AR9285 / USB support)
> TP-Link TL-MR3420 v1 (SoC AR7241 / Wifi AR9287 / USB support)
>
> File ar7241_ap99.dtsi have common architecture with those devices
> and dts files include it as common configuration.
To be honest, I don't like the ar7241_ap99.dtsi filename and I'm not
sure if it really does make sense to use a dtsi here. For instance,
only two of the boards have a usb led and your workaround is to move
the usb led into an extra gpio led node. I prefer to have a complete
gpio-leds in the dts files instead.
The spi node from the dtsi is overwritten by one dts. In that case it
shouldn't be added to dtsi. Instead each dts should have it's own spi
node.
While I love to remove redundant stuff, we need to keep an eye on
maintainability/readability. I would like to ensure that we don't
break something for the boards including the dtsif, we change
something in the dtsi.
>
> Signed-off-by: Deoptim <dioptimizer at hotmail.com>
Full name here. as well
> ---
> .../ath79/base-files/etc/board.d/02_network | 7 +
> .../etc/hotplug.d/firmware/10-ath9k-eeprom | 3 +
> target/linux/ath79/dts/ar7241_ap99.dtsi | 144 ++++++++++++++++++
> .../linux/ath79/dts/ar7241_tl-mr3220-v1.dts | 108 +++++++++++++
> .../linux/ath79/dts/ar7241_tl-mr3420-v1.dts | 44 ++++++
> target/linux/ath79/dts/ar7241_tl-wr841-v7.dts | 12 ++
> target/linux/ath79/image/tiny-tp-link.mk | 29 ++++
> 7 files changed, 347 insertions(+)
> create mode 100644 target/linux/ath79/dts/ar7241_ap99.dtsi
> create mode 100644 target/linux/ath79/dts/ar7241_tl-mr3220-v1.dts
> create mode 100644 target/linux/ath79/dts/ar7241_tl-mr3420-v1.dts
> create mode 100644 target/linux/ath79/dts/ar7241_tl-wr841-v7.dts
>
> diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
> index e2a45b0526..689ae82ffb 100755
> --- a/target/linux/ath79/base-files/etc/board.d/02_network
> +++ b/target/linux/ath79/base-files/etc/board.d/02_network
> @@ -98,6 +98,13 @@ ath79_setup_interfaces()
> ucidef_add_switch "switch0" \
> "0 at eth0" "3:lan:1" "5:lan:2" "4:wan"
> ;;
> + "tplink,tl-wr841-v7"|\
> + "tplink,tl-mr3220-v1"|\
> + "tplink,tl-mr3420-v1")
> + ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch should already set the lan interface. A
ucidef_set_interface_wan "eth1" should be sufficient here.
> + ucidef_add_switch "switch0" \
> + "0 at eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
> + ;;
> *)
> ucidef_set_interfaces_lan_wan "eth0" "eth1"
> ;;
> diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
> index 7023fa5e58..e5e2b1f8d3 100644
> --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
> +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
> @@ -54,6 +54,9 @@ case "$FIRMWARE" in
> "tplink,tl-wdr4300")
> ath9k_eeprom_extract "art" 20480 1088
> ;;
> + "tplink,tl-wr841-v7"|\
> + "tplink,tl-mr3220-v1"|\
> + "tplink,tl-mr3420-v1"|\
> "netgear,wnr612-v2"|\
> "on,n150r"|\
> "tplink,tl-wr740n-v2"|\
> diff --git a/target/linux/ath79/dts/ar7241_ap99.dtsi b/target/linux/ath79/dts/ar7241_ap99.dtsi
> new file mode 100644
> index 0000000000..d3834b4915
> --- /dev/null
> +++ b/target/linux/ath79/dts/ar7241_ap99.dtsi
> @@ -0,0 +1,144 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +#include "ar7241.dtsi"
> +
> +/ {
> + aliases {
> + led-status = &led_system;
> + };
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x2000000>;
> + };
The pending https://github.com/openwrt/openwrt/pull/1091 is about to
remove all memory nodes in favour of the automatic memory detection.
Would you please test if the correct of amount of memory is detected
without the node. If so, it can be removed.
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <20>;
> +
> + reset {
> + label = "reset";
> + linux,code = <KEY_RESTART>;
> + gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
> + debounce-interval = <60>;
> + };
> +
> + qss {
> + label = "qss";
> + linux,code = <KEY_WPS_BUTTON>;
> + gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
> + debounce-interval = <60>;
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> +
> + led_system: system {
> + label = "tp-link:green:system";
> + gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "heartbeat";
Please remove the heartbeat trigger. Due to the led-status alias the
led is used for status/diag signaling.
> + };
> +
> + qss {
> + label = "tp-link:green:qss";
> + gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + ath9k-leds {
> + compatible = "gpio-leds";
> +
> + wlan {
> + label = "ath9k-phy0";
Please use a proper tp-link:<colour>:<function> label as well.
> + gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + linux,default-trigger = "phy0tpt";
> + };
> + };
> +};
> +
> +&spi {
> + status = "okay";
> + num-cs = <1>;
> +
> + flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <25000000>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + uboot: partition at 0 {
> + reg = <0x0 0x20000>;
> + label = "u-boot";
> + read-only;
> + };
> +
> + firmware: partition at 20000 {
> + reg = <0x20000 0x3d0000>;
> + label = "firmware";
> + };
> +
> + art: partition at 3f0000 {
> + reg = <0x3f0000 0x10000>;
> + label = "art";
> + read-only;
> + };
> + };
> + };
> +};
> +
> +&pcie {
> + status = "okay";
> +
> + ath9k: wifi at 0 {
> + reg = <0x0000 0 0 0 0>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + qca,no-eeprom;
> + mtd-mac-address = <&uboot 0x1fc00>;
> + };
> +};
> +
> +ð0 {
> + status = "okay";
> +
> + mtd-mac-address = <&uboot 0x1fc00>;
> + mtd-mac-address-increment = <(-1)>;
> + phy-handle = <&phy4>;
> +};
> +
> +ð1 {
> + status = "okay";
> +
> + mtd-mac-address = <&uboot 0x1fc00>;
> + mtd-mac-address-increment = <1>;
> +};
> +
> +&mdio0 {
> + status = "okay";
> +
> + phy4: ethernet-phy at 4 {
> + reg = <4>;
> + phy-mode = "mii";
> + };
> +};
> +
> +&gpio {
> + status = "okay";
> +};
> +
> +&uart {
> + status = "okay";
> +};
> diff --git a/target/linux/ath79/dts/ar7241_tl-mr3220-v1.dts b/target/linux/ath79/dts/ar7241_tl-mr3220-v1.dts
> new file mode 100644
> index 0000000000..a5d577749e
> --- /dev/null
> +++ b/target/linux/ath79/dts/ar7241_tl-mr3220-v1.dts
> @@ -0,0 +1,108 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/dts-v1/;
> +
> +#include "ar7241_ap99.dtsi"
> +
> +/ {
> + compatible = "tplink,tl-mr3220-v1", "qca,ar7241";
> + model = "TP-Link TL-MR3220 v1";
> +
> + usb-leds {
> + compatible = "gpio-leds";
> +
> + led3g {
> + label = "tp-link:green:3g";
> + gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + trigger-sources = <&hub_port>;
> + linux,default-trigger = "usbport";
> + };
> + };
> +
> + ath9k-leds {
> + compatible = "gpio-leds";
> +
> + wlan {
> + label = "ath9k-phy0";
> + gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + linux,default-trigger = "phy0tpt";
> + };
> + };
> +
> + reg_usb_vbus: reg_usb_vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usb_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio 6 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +};
> +
> +&spi {
> + status = "okay";
> + num-cs = <2>;
> + // First value is default pin for flash, second value
> + // (via comma) the GPIO number for sdcard. But we used
> + // gpio 2 and it equivalent of internal CS0 line. And
> + // we use it because we use common bus SPI0.0 for two
> + // devices (default Low polarity chip-select, custom
> + // High polarity chip-select).
> + // In its core, this is a dummy, because internal CS0 line
> + // is locked by HW and SPI driver, and we can not use it at all.
> + // We use this to simply switch SPI bus to another device.
> + cs-gpios = <0>, <&gpio 2 GPIO_ACTIVE_HIGH>;
> +
> + flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <25000000>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + uboot: partition at 0 {
> + reg = <0x0 0x20000>;
> + label = "u-boot";
> + read-only;
> + };
> +
> + firmware: partition at 20000 {
> + reg = <0x20000 0x3d0000>;
> + label = "firmware";
> + };
> +
> + art: partition at 3f0000 {
> + reg = <0x3f0000 0x10000>;
> + label = "art";
> + read-only;
> + };
> + };
> + };
> +
> + sdcard at 0 {
> + compatible = "mmc-spi-slot";
> + reg = <1>;
> + spi-max-frequency = <25000000>;
> + voltage-ranges = <3200 3400>;
> + };
> +};
> +
> +&usb {
> + vbus-supply = <®_usb_vbus>;
> + status = "okay";
> +
> + hub_port: port at 1 {
> + reg = <1>;
> + #trigger-source-cells = <0>;
> + };
> +};
> +
> +&usb_phy {
> + status = "okay";
> +};
> diff --git a/target/linux/ath79/dts/ar7241_tl-mr3420-v1.dts b/target/linux/ath79/dts/ar7241_tl-mr3420-v1.dts
> new file mode 100644
> index 0000000000..de2a237d06
> --- /dev/null
> +++ b/target/linux/ath79/dts/ar7241_tl-mr3420-v1.dts
> @@ -0,0 +1,44 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/dts-v1/;
> +
> +#include "ar7241_ap99.dtsi"
> +
> +/ {
> + compatible = "tplink,tl-mr3420-v1", "qca,ar7241";
> + model = "TP-Link TL-MR3420 v1";
> +
> + usb-leds {
> + compatible = "gpio-leds";
> +
> + led3g {
> + label = "tp-link:green:3g";
> + gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + trigger-sources = <&hub_port>;
> + linux,default-trigger = "usbport";
> + };
> + };
> +
> + reg_usb_vbus: reg_usb_vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usb_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio 6 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +};
> +
> +&usb {
> + vbus-supply = <®_usb_vbus>;
> + status = "okay";
> +
> + hub_port: port at 1 {
> + reg = <1>;
> + #trigger-source-cells = <0>;
> + };
> +};
> +
> +&usb_phy {
> + status = "okay";
> +};
> diff --git a/target/linux/ath79/dts/ar7241_tl-wr841-v7.dts b/target/linux/ath79/dts/ar7241_tl-wr841-v7.dts
> new file mode 100644
> index 0000000000..ecf0fb5577
> --- /dev/null
> +++ b/target/linux/ath79/dts/ar7241_tl-wr841-v7.dts
> @@ -0,0 +1,12 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +#include "ar7241_ap99.dtsi"
> +
> +/ {
> + compatible = "tplink,tl-wr841-v7", "qca,ar7241";
> + model = "TP-LINK TL-WR841N/ND v7";
> +};
> \ No newline at end of file
> diff --git a/target/linux/ath79/image/tiny-tp-link.mk b/target/linux/ath79/image/tiny-tp-link.mk
> index 1dfed48dba..e4d07143ed 100644
> --- a/target/linux/ath79/image/tiny-tp-link.mk
> +++ b/target/linux/ath79/image/tiny-tp-link.mk
> @@ -39,3 +39,32 @@ define Device/tl-wr740n-v2
> SUPPORTED_DEVICES := tplink,tl-wr740n-v2 tl-wr740n-v2
> endef
> TARGET_DEVICES += tl-wr740n-v2
> +
> +define Device/tl-wr841-v7
> + $(Device/tplink-4m)
> + ATH_SOC := ar7241
> + DEVICE_TITLE := TP-LINK TL-WR841N/ND v7
> + TPLINK_HWID := 0x08410007
> + SUPPORTED_DEVICES := tplink,tl-wr841-v7 tl-wr841-v7
> +endef
> +TARGET_DEVICES += tl-wr841-v7
> +
> +define Device/tl-mr3220-v1
> + $(Device/tplink-4m)
> + ATH_SOC := ar7241
> + DEVICE_TITLE := TP-Link TL-MR3220 v1
> + TPLINK_HWID := 0x32200001
> + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
> + SUPPORTED_DEVICES := tplink,tl-mr3220-v1 tl-mr3220-v1
> +endef
> +TARGET_DEVICES += tl-mr3220-v1
> +
> +define Device/tl-mr3420-v1
> + $(Device/tplink-4m)
> + ATH_SOC := ar7241
> + DEVICE_TITLE := TP-Link TL-MR3420 v1
> + TPLINK_HWID := 0x34200001
> + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
> + SUPPORTED_DEVICES := tplink,tl-mr3420-v1 tl-mr3420-v1
> +endef
> +TARGET_DEVICES += tl-mr3420-v1
> --
> 2.17.1
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list