[OpenWrt-Devel] dnscrypt-proxy package missing in snapshot

[Maciej Soltysiak]

Hi,

It doesn't look like there are any takers for this task.
Can anyone guide me to a 101 tutorial on making a brand new package?
dnscrypt-proxy 2 is completely different from its predecessor. There are
sources, as well as pre-build binaries for 20+ architectures.
go is required to build.

I'd very much appreciate for helping do this,
Maciej

On Sun, Feb 18, 2018 at 12:24 AM, Maciej Soltysiak <maciej at soltysiak.com>
wrote:

> On my MIPS32 (WNDR3800) system, I noticed the C binary was <100k.
> The GO binary is 6.5MB, I ran upx on it and it went down to 1.5M.
> It incurs about 1s of delay for unpacking, but it works.
>
> I don't know much about packaging this around the uci scripting, etc, but
> I hope this helps the maintainer a bit.
>
> Best regards,
> Maciej
>
> On Sat, Feb 17, 2018 at 11:40 PM, Maciej Soltysiak <maciej at soltysiak.com>
> wrote:
>
>> The OpenWrt Makefile aims to get dnscrypt-proxy 1.9.5 from a mirror at
>> https://github.com/dyne/dnscrypt-proxy
>>
>> However, the upstream (Frank Denis) recently released a 2.0 which is
>> significantly different.
>> It's now written in go, instead of C and it support the new version of
>> the protocol (v2).
>>
>> If we're going to get this package fixed we should see if we can get the
>> new one to run.
>> Probably should come from upstream at: https://github.com/jedisct1/dn
>> scrypt-proxy
>>
>> Best regards,
>> Maciej
>>
>> On Mon, May 1, 2017 at 12:48 PM, Alexandru Ardelean <
>> ardeleanalex at gmail.com> wrote:
>>
>>> On Mon, May 1, 2017 at 12:04 PM, Mangesh Bhamre <mangesh at opennetware.com>
>>> wrote:
>>> >
>>> > Hello,
>>> >
>>> > Last time I reported this issue was for MT7620.  dnscrypt-proxy now
>>> failing for MT7621.
>>> >
>>> > http://buildbot.openwrt.org:8010/broken_packages/ramips.mt76
>>> 21/dnscrypt-proxy/compile.txt
>>> >
>>> > I am not sure what was the fix made. Likely was related to SSL cert
>>> check. Can anyone please look at this and fix it same way as MT7620 ?
>>> >
>>> > Regards,
>>> > Mangesh
>>> >
>>> > --
>>> > Regards,
>>> >
>>> > Mangesh Bhamre
>>> > Co-founder & CTO | Open Netware
>>> > +91-8879735272 | LinkedIn
>>> >
>>> >
>>> > On Mon, Feb 13, 2017 at 9:33 PM, Ralph Sennhauser <
>>> ralph.sennhauser at gmail.com> wrote:
>>> >>
>>> >> On Mon, 13 Feb 2017 21:03:07 +0530
>>> >> Mangesh Bhamre <mangesh at opennetware.com> wrote:
>>> >>
>>> >> > Hi Alex,
>>> >> >
>>> >> > Looking at build log -
>>> >> > http://buildbot.openwrt.org:8010/broken_packages/ramips.mt76
>>> 20/dnscrypt-proxy/compile.txt
>>> >> >
>>> >> > Tar ball is available on download.dnscrypt.org . Build download
>>> fails
>>> >> > for some SSL issue.
>>> >>
>>> >> The site has HSTS enabled. Might that be the issue?
>>> >>
>>> >> Maybe just updating PKG_SOURCE_URL to use https might be all that
>>> >> is needed. There was another user having issues with a redirect and
>>> >> samba. I think he was using Ubuntu.
>>> >>
>>> >> Ralph
>>> >>
>>> >> >
>>> >> > Also, tar ball is missing on mirror2.openwrt.org and
>>> >> > downloads.openwrt.org/sources
>>> >> >
>>> >> > Not sure, how mirror2 or download.openwrt.org gets updated.  Any
>>> help
>>> >> > in getting is appreciated.
>>> >> >
>>> >> > Regards,
>>> >> > Mangesh
>>> >> >
>>> >> >
>>> >
>>> >
>>>
>>> Looks like the package wasn't found on OpenWrt mirrors.
>>> Maybe some intermittent failure.
>>>
>>> You could try to setup your own cache/mirror [for packages/tarballs]
>>> and point your build to use that as primary, and only then fallback to
>>> OpenWrt's official repos.
>>> _______________________________________________
>>> openwrt-devel mailing list
>>> openwrt-devel at lists.openwrt.org
>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20180606/0483e64f/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel