[OpenWrt-Devel] dnscrypt-proxy package missing in snapshot

[Maciej Soltysiak]

On my MIPS32 (WNDR3800) system, I noticed the C binary was <100k.
The GO binary is 6.5MB, I ran upx on it and it went down to 1.5M.
It incurs about 1s of delay for unpacking, but it works.

I don't know much about packaging this around the uci scripting, etc, but I
hope this helps the maintainer a bit.

Best regards,
Maciej

On Sat, Feb 17, 2018 at 11:40 PM, Maciej Soltysiak <maciej at soltysiak.com>
wrote:

> The OpenWrt Makefile aims to get dnscrypt-proxy 1.9.5 from a mirror at
> https://github.com/dyne/dnscrypt-proxy
>
> However, the upstream (Frank Denis) recently released a 2.0 which is
> significantly different.
> It's now written in go, instead of C and it support the new version of the
> protocol (v2).
>
> If we're going to get this package fixed we should see if we can get the
> new one to run.
> Probably should come from upstream at: https://github.com/jedisct1/
> dnscrypt-proxy
>
> Best regards,
> Maciej
>
> On Mon, May 1, 2017 at 12:48 PM, Alexandru Ardelean <
> ardeleanalex at gmail.com> wrote:
>
>> On Mon, May 1, 2017 at 12:04 PM, Mangesh Bhamre <mangesh at opennetware.com>
>> wrote:
>> >
>> > Hello,
>> >
>> > Last time I reported this issue was for MT7620.  dnscrypt-proxy now
>> failing for MT7621.
>> >
>> > http://buildbot.openwrt.org:8010/broken_packages/ramips.mt76
>> 21/dnscrypt-proxy/compile.txt
>> >
>> > I am not sure what was the fix made. Likely was related to SSL cert
>> check. Can anyone please look at this and fix it same way as MT7620 ?
>> >
>> > Regards,
>> > Mangesh
>> >
>> > --
>> > Regards,
>> >
>> > Mangesh Bhamre
>> > Co-founder & CTO | Open Netware
>> > +91-8879735272 | LinkedIn
>> >
>> >
>> > On Mon, Feb 13, 2017 at 9:33 PM, Ralph Sennhauser <
>> ralph.sennhauser at gmail.com> wrote:
>> >>
>> >> On Mon, 13 Feb 2017 21:03:07 +0530
>> >> Mangesh Bhamre <mangesh at opennetware.com> wrote:
>> >>
>> >> > Hi Alex,
>> >> >
>> >> > Looking at build log -
>> >> > http://buildbot.openwrt.org:8010/broken_packages/ramips.mt76
>> 20/dnscrypt-proxy/compile.txt
>> >> >
>> >> > Tar ball is available on download.dnscrypt.org . Build download
>> fails
>> >> > for some SSL issue.
>> >>
>> >> The site has HSTS enabled. Might that be the issue?
>> >>
>> >> Maybe just updating PKG_SOURCE_URL to use https might be all that
>> >> is needed. There was another user having issues with a redirect and
>> >> samba. I think he was using Ubuntu.
>> >>
>> >> Ralph
>> >>
>> >> >
>> >> > Also, tar ball is missing on mirror2.openwrt.org and
>> >> > downloads.openwrt.org/sources
>> >> >
>> >> > Not sure, how mirror2 or download.openwrt.org gets updated.  Any
>> help
>> >> > in getting is appreciated.
>> >> >
>> >> > Regards,
>> >> > Mangesh
>> >> >
>> >> >
>> >
>> >
>>
>> Looks like the package wasn't found on OpenWrt mirrors.
>> Maybe some intermittent failure.
>>
>> You could try to setup your own cache/mirror [for packages/tarballs]
>> and point your build to use that as primary, and only then fallback to
>> OpenWrt's official repos.
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20180218/5b1e7662/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel