[OpenWrt-Devel] [PATCH 3/5] ath79: gmac: ar934x: Add parser for mii-gmac0-slave

[Petr Štetiar]

In ar71xx/mach-ubnt-xm.c there's following code:

static void __init ubnt_xw_init(void) {
	...
	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
	...
}

But I couldn't find a way how to set it up via DTS.

Tested-by: Joe Ayers <ae6xe at arrl.net>
Signed-off-by: Petr Štetiar <ynezz at true.cz>
---
 .../linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c  | 1 +
 1 file changed, 1 insertion(+)

diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c
index e69abb6..cc0a15d 100644
--- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c
+++ b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c
@@ -53,6 +53,7 @@ static void ag71xx_setup_gmac_934x(struct device_node *np, void __iomem *base)
 
 	ag71xx_of_bit(np, "rgmii-gmac0", &val, AR934X_ETH_CFG_RGMII_GMAC0);
 	ag71xx_of_bit(np, "mii-gmac0", &val, AR934X_ETH_CFG_MII_GMAC0);
+	ag71xx_of_bit(np, "mii-gmac0-slave", &val, AR934X_ETH_CFG_MII_GMAC0_SLAVE);
 	ag71xx_of_bit(np, "gmii-gmac0", &val, AR934X_ETH_CFG_GMII_GMAC0);
 	ag71xx_of_bit(np, "switch-phy-swap", &val, AR934X_ETH_CFG_SW_PHY_SWAP);
 	ag71xx_of_bit(np, "switch-only-mode", &val,
-- 
1.9.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel