[OpenWrt-Devel] [PATCH v2 2/2] ipq806x: dts: Add support for RGMII RX and TX clock delays

[Ram Chandra Jangir]

This change enables support to select phy4 in RGMII mode and
enables RGMII TX/RX clock internal delays.

Signed-off-by: Ram Chandra Jangir <rjangir at codeaurora.org>
---
 .../linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap161.dts  | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
index 8c5a4fe..7e589be 100644
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
+++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
@@ -220,6 +220,9 @@
 
 			phy4: ethernet-phy at 4 {
 				reg = <4>;
+				qca,phy-rgmii-en;
+				qca,txclk-delay-en;
+				qca,rxclk-delay-en;
 			};
 
 			phy3: ethernet-phy at 3 {
-- 
1.9.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel