[OpenWrt-Devel] [PATCH] x86: Add APU3 reference to x86 board.d

Philip Prindeville philipp_subx at redfish-solutions.com
Fri Apr 20 20:58:55 EDT 2018


Looks okay to me.

Are the cases stenciled with the port #’s?

Last PC Engines board I had (a Alix 2D3) the firmware would detect the ports in the opposite order (PCI enumerator) than the markings on the case.



> On Mar 15, 2018, at 6:30 AM, Kristian Evensen <kristian.evensen at gmail.com> wrote:
> 
> There is a new APU-model available, APU3. The device is configured in
> the same way as the APU1 and APU2, so the same LED/network setup can be
> used.
> 
> I considered changing the case to pc-engines-apu*, but I chose to follow
> the existing pattern and add the full board name.
> 
> Signed-off-by: Kristian Evensen <kristian.evensen at gmail.com>
> ---
> target/linux/x86/base-files/etc/board.d/01_leds    | 2 +-
> target/linux/x86/base-files/etc/board.d/02_network | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/target/linux/x86/base-files/etc/board.d/01_leds b/target/linux/x86/base-files/etc/board.d/01_leds
> index 04e11705ac..25dc4aeeb1 100755
> --- a/target/linux/x86/base-files/etc/board.d/01_leds
> +++ b/target/linux/x86/base-files/etc/board.d/01_leds
> @@ -8,7 +8,7 @@
> board_config_update
> 
> case "$(board_name)" in
> -pc-engines-apu|pc-engines-apu2)
> +pc-engines-apu|pc-engines-apu2|pc-engines-apu3)
> 	ucidef_set_led_netdev "wan" "WAN" "apu2:green:led3" "eth0"
> 	ucidef_set_led_netdev "lan" "LAN" "apu2:green:led2" "br-lan"
> 	ucidef_set_led_default "diag" "DIAG" "apu2:green:power" "1"
> diff --git a/target/linux/x86/base-files/etc/board.d/02_network b/target/linux/x86/base-files/etc/board.d/02_network
> index bea696d8ff..c6e381b946 100755
> --- a/target/linux/x86/base-files/etc/board.d/02_network
> +++ b/target/linux/x86/base-files/etc/board.d/02_network
> @@ -9,7 +9,7 @@
> board_config_update
> 
> case "$(board_name)" in
> -pc-engines-apu|pc-engines-apu2)
> +pc-engines-apu|pc-engines-apu2|pc-engines-apu3)
> 	ucidef_set_interfaces_lan_wan "eth1 eth2" "eth0"
> 	;;
> traverse-technologies-geos)
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list