[OpenWrt-Devel] [PATCH] mac80211: pass hostapd control socket to mesh-mode supplicant

[daniel]

This patch breaks encrypted mesh mode.

I agree, there is still something wrong with the logic when using encrypted mesh.
Also the setting of the mesh parameters fails, because nl80211_mesh_join must
happen before nl80211_update_mesh_config. This results in these errors:
---
netifd: radio1 (6314): command failed: Link has been severed (-67)
---
Originating from net/wireless/nl80211.c:nl80211_update_mesh_config():6133
through calling in 'iw set mesh_params' at /lib/netifd/wireless/mac80211.sh:678

When using mesh without encryption this is not an issue, because
'iw mesh_join' is called before 'iw set mesh_params'
in '/lib/netifd/wireless/mac80211.sh:678

With encryption the setting of the parameters need to happen after
wpa_supplicant triggered nl80211_mesh_join.

But I don't know how to solve this properly yet either...

On 04/13/2018 01:41 AM, Daniel Golle wrote:
> Unlike when operating in Ad-Hoc mode, we apparently need to pass the
> hostapd control socket interface to wpa_supplicant when using 802.11s
> mesh mode.
> 
> There also seems to still be something wrong with the logic setting
> channel and (v)htmode parameters when using AP + mesh...
> 
> Signed-off-by: Daniel Golle <daniel at makrotopia.org>
> ---
>  package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh
> index bf9d52ae42..3a1d475a5c 100644
> --- a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh
> +++ b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh
> @@ -633,7 +633,7 @@ mac80211_setup_vif() {
>  			if [ -n "$key" ]; then
>  				wireless_vif_parse_encryption
>  				freq="$(get_freq "$phy" "$channel")"
> -				mac80211_setup_supplicant_noctl || failed=1
> +				mac80211_setup_supplicant || failed=1
>  			else
>  				json_get_vars mesh_id mcast_rate
>  
> 

-- 
Regards

Daniel Danzberger
embeDD GmbH, Alter Postplatz 2, CH-6370 Stans
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel