[OpenWrt-Devel] OpenWrt -> LEDE git tree merge

[Zoltan HERPAI]

Hi,

Zoltan HERPAI wrote:
> Hi Hauke,
>
> On Sun, 22 Oct 2017, Hauke Mehrtens wrote:
>
>> I am working on merging the missing commits from the OpenWrt git
>> repository into the LEDE repository.
>>
>> Here is a list of all non merge commits from the OpenWrt git repository
>> and their corresponding LEDE commit IDs:
>> https://github.com/hauke/openwrt-lede-merge/blob/master/commits.csv
>>
>> I only looked into the non merge commits and assumed that commits with
>> the same title are the same, if this is wrong please point me to some
>> place where this causes problems.
>>
>> I used this script to generate the csv table:
>> https://github.com/hauke/openwrt-lede-merge/blob/master/openwrt-merge.py
>>
>> The bigger topics I see are:
>> * addition of SoCFPGA target with kernel 4.4 support
>> * Will someone port this to kernel 4.9 or provide me with hardware so I
>>   can try to port this and test it?
>> * There are some commits without a Signed-off-by line, I will contact
>>  the authors.
>> * The realview target was removed from LEDE, but it got an update to
>>  kernel 4.4 in OpenWrt, how do we want to handle this? Does anyone need
>>  the realview target?
>
> As discussed earlier, I've prepared manually a list of commits that 
> are missing from LEDE. I was about to send:
>
>  - a set of patches that probably don't need any discussion and can be 
> merged right away,
>  - a set of patches that are RFC, and should be discussed.
>
> Let me know if that should still happen.
The series has been sent as discussed on irc. I don't recall any more 
required - also based on checking the CSV, thanks for prepping that.

The RFC patches/PRs are:

----
 - https://github.com/openwrt/openwrt/pull/433
I'd like to add genimage support to OpenWrt. With this package one can 
create arbitrary image either for internal flash or SD/USB storage devices.
As this package is basically applicable to any target should I enable it 
in tools/Makefile tools-y target?

 - https://github.com/openwrt/openwrt/pull/409
Add nconfig toplevel target to utilize ncurses ui configuration utility 
as found on kernel's buildsystem.

 - https://github.com/openwrt/openwrt/pull/533
tools: add package autoconf-archive

 - https://github.com/openwrt/openwrt/pull/464
Add full control of network configuration to a user script #464

 - https://github.com/openwrt/openwrt/pull/312
ar71xx: add support for Zsun WiFi SD Card Reader

 - 
https://github.com/openwrt/openwrt/commit/4f997727aef0603f02e9320ba787ea1b894747c0
lantiq: td-w8980: fix failsafe mode via ethernet.

 - 
https://github.com/openwrt/openwrt/commit/9fb1348a0aa8954535ec5a2c088037af0d7b9297
packages: lzo: Update LZO Makefile to repair dead Main URL

 - https://github.com/openwrt/openwrt/pull/539
Add TL-WA901v5 support
----

 - #1-4 would require discussion if they're needed at all, they look as 
"nice to have".
 - #5 needs some work as it has some dirty hacks. This can be taken care 
on the summit's second day - I recall someone going there has a ZSun reader
 - #6 - I haven't seen traces of this in LEDE, but I leave it to the 
lantiq experts to opinion on
 - #7 was due to an outage if I recall correctly, again, it's optional
 - #8 - needs some further changes around creating the -factory image

Regards,
-w-
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel