[OpenWrt-Devel] MV88E6060 switch

[Nerijus Baliunas]

On Thu, 12 Oct 2017 00:15:15 +0300 Sergey Ryazanov <ryazanov.s.a at gmail.com> wrote:

> >> As a quick test, can you unload all kernel modules and try to set eth0 UP again?
> >
> > Unfortunately rmmod with a list of modules does not work:
> > # rmmod ip_tables ip6_tables ip6t_REJECT ...
> > Usage:
> >         rmmod module
> > so I had to unload one by one. I unloaded until there was
> > # cat /proc/meminfo
> > MemTotal:          12232 kB
> > MemFree:            1304 kB
> >
> > but still does not work:
> > # ifconfig eth0 up
> > ifconfig: SIOCSIFFLAGS: Out of memory
> 
> Can you boot in failsafe mode again, check free memory while the
> interface is Up, then bring it Down and check free memory again? That
> will show which amount of memory it needs.

# cat /proc/meminfo 
MemTotal:          12232 kB
MemFree:            1108 kB
# ifconfig eth0 down
# cat /proc/meminfo 
MemTotal:          12232 kB
MemFree:            2136 kB
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel