[OpenWrt-Devel] [PATCH 4/4] ARM: dts: add Gemini PATA/SATA support

[Linus Walleij]

The NAS4229B and SQ201 Gemini systems have a PATA controller
which is linked to a SATA bridge in the SoC. Enable both
platforms to use the PATA/SATA devices.

Cc: John Feng-Hsin Chiang <john453 at faraday-tech.com>
Cc: Greentime Hu <green.hu at gmail.com>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
PATA maintainers: this file will be applied by me through the ARM
SoC git tree. It is provided for reference only so you see how
it will be used.
---
 arch/arm/boot/dts/gemini-nas4220b.dts | 10 +++++++
 arch/arm/boot/dts/gemini-sq201.dts    | 10 +++++++
 arch/arm/boot/dts/gemini.dtsi         | 56 +++++++++++++++++++++++++++++++++++
 3 files changed, 76 insertions(+)

diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 7668ba52158e..55f6a4f1f801 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -98,5 +98,15 @@
 				read-only;
 			};
 		};
+
+		sata: sata at 46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		ata at 63000000 {
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
index 46309e79cc7b..4d200f0bcd45 100644
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini-sq201.dts
@@ -93,6 +93,12 @@
 			};
 		};
 
+		sata: sata at 46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
 		pci at 50000000 {
 			status = "okay";
 			interrupt-map-mask = <0xf800 0 0 7>;
@@ -114,5 +120,9 @@
 				<0x6000 0 0 3 &pci_intc 1>,
 				<0x6000 0 0 4 &pci_intc 2>;
 		};
+
+		ata at 63000000 {
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index 6fe678a68e31..a50ad49d38f5 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -89,6 +89,18 @@
 			clock-names = "PCLK", "EXTCLK";
 		};
 
+		sata: sata at 46000000 {
+			compatible = "cortina,gemini-sata-bridge";
+			reg = <0x46000000 0x100>;
+			resets = <&rcon 26>, <&rcon 27>;
+			reset-names = "sata0", "sata1";
+			clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
+				 <&gcc GEMINI_CLK_GATE_SATA1>;
+			clock-names = "SATA0_PCLK", "SATA1_PCLK";
+			syscon = <&syscon>;
+			status = "disabled";
+		};
+
 		intcon: interrupt-controller at 48000000 {
 			compatible = "faraday,ftintc010";
 			reg = <0x48000000 0x1000>;
@@ -183,5 +195,49 @@
 				#interrupt-cells = <1>;
 			};
 		};
+
+		ata at 63000000 {
+			compatible = "cortina,gemini-pata", "faraday,ftide010";
+			reg = <0x63000000 0x1000>;
+			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+			resets = <&rcon 2>;
+			clocks = <&gcc GEMINI_CLK_GATE_IDE>;
+			clock-names = "PCLK";
+			sata = <&sata>;
+			status = "disabled";
+			/* PIO timings assume 33 MHz bus speed */
+			faraday,pio-active-time = <10>, <10>, <10>, <3>, <3>;
+			faraday,pio-recovery-time = <10>, <3>, <1>, <3>, <1>;
+			faraday,mdma-50-active-time = <6>, <2>, <2>;
+			faraday,mdma-50-recovery-time = <6>, <2>, <1>;
+			faraday,mdma-66-active-time = <8>, <3>, <3>;
+			faraday,mdma-66-recovery-time = <8>, <2>, <1>;
+			faraday,udma-50-setup-time = <3>, <3>, <2>, <2>, <1>, <1>;
+			faraday,udma-50-hold-time = <3>, <1>, <1>, <1>, <1>, <1>;
+			faraday,udma-66-setup-time = <4>, <4>, <3>, <2>, <1>, <1>, <1>;
+			faraday,udma-66-hold-time = <4>, <2>, <1>, <1>, <1>, <1>, <1>;
+		};
+
+		ata at 63400000 {
+			compatible = "cortina,gemini-pata", "faraday,ftide010";
+			reg = <0x63400000 0x1000>;
+			interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+			resets = <&rcon 2>;
+			clocks = <&gcc GEMINI_CLK_GATE_IDE>;
+			clock-names = "PCLK";
+			sata = <&sata>;
+			status = "disabled";
+			/* PIO timings assume 33 MHz bus speed */
+			faraday,pio-active-time = <10>, <10>, <10>, <3>, <3>;
+			faraday,pio-recovery-time = <10>, <3>, <1>, <3>, <1>;
+			faraday,mdma-50-active-time = <6>, <2>, <2>;
+			faraday,mdma-50-recovery-time = <6>, <2>, <1>;
+			faraday,mdma-66-active-time = <8>, <3>, <3>;
+			faraday,mdma-66-recovery-time = <8>, <2>, <1>;
+			faraday,udma-50-setup-time = <3>, <3>, <2>, <2>, <1>, <1>;
+			faraday,udma-50-hold-time = <3>, <1>, <1>, <1>, <1>, <1>;
+			faraday,udma-66-setup-time = <4>, <4>, <3>, <2>, <1>, <1>, <1>;
+			faraday,udma-66-hold-time = <4>, <2>, <1>, <1>, <1>, <1>, <1>;
+		};
 	};
 };
-- 
2.9.3
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel