[OpenWrt-Devel] hostapd: Default disable b rates, add legacy_rates

[Tom Psyborg]

Hi

After found out about commit
https://git.lede-project.org/?p=lede/nbd/staging.git;a=commit;h=5b42521a9ecbd311920e8fde98bbbf8d70eba5a0


i've read the presentation provided in the link and noticed this enables
require_mode g by default.

Can you be sure this really disables DSSS/CCK ? I've been running mt7620
device with this option for short while, and while scanning networks with
ralink client utility the AP is detected as g+n.

But if i switch card to broadcom one it still listed AP as b+g+n. Maybe
there is some low-level change required to drop 802.11b support or it is
only compatibility issue with the infamous chipset?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20170327/3751f4cd/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel