[OpenWrt-Devel] [PATCH 4/8] caldata-utils: new package to manipulate ath10k

[Sven Eckelmann]

On Donnerstag, 31. März 2016 19:48:20 CET Adrian Panella wrote:
> >From df9a676bb3ba225f0fd6621dbaeec945baf3153d Mon Sep 17 00:00:00 2001
> From: Adrian Panella <ianchi74 at outlook.com>
> Date: Wed, 30 Mar 2016 23:31:06 -0600
> Subject: [PATCH 12/15] caldata-utils: new package to manipulate ath10k
>   calibration data
> 
> Signed-off-by: Adrian Panella <ianchi74 at outlook.com>
> ---
>   package/utils/caldata-utils/Makefile      |  60 +++++++++
>   package/utils/caldata-utils/src/Makefile  |   8 ++
>   package/utils/caldata-utils/src/caldata.c | 213 
> ++++++++++++++++++++++++++++++
>   package/utils/caldata-utils/src/caldata.h |  42 ++++++
>   package/utils/caldata-utils/src/utils.c   |  72 ++++++++++
>   5 files changed, 395 insertions(+)
>   create mode 100644 package/utils/caldata-utils/Makefile
>   create mode 100644 package/utils/caldata-utils/src/Makefile
>   create mode 100644 package/utils/caldata-utils/src/caldata.c
>   create mode 100644 package/utils/caldata-utils/src/caldata.h
>   create mode 100644 package/utils/caldata-utils/src/utils.c

I know that the patch submitted here is in a broken state. But was there any
decision made what will be done about this problem in general?

This will become a problem again on IPQ4019 when somebody must patch the mac 
address in the pre-cal data. The OTP firmware binary of ath10k will simply 
reject its content when the checksum in the pre-cal data is incorrect.

This reject will happen when the PARAM_FLASH_SECTION_ALL parameter is sent to 
the OTP [1] (step 4). Instead it will then use the boarddata from board-2.bin 
which was send to the device in step 3. It is then missing most calibration 
data which is specific to this single board.

Kind regards,
	Sven

[1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=3d9195ea19e4854d7daa11688b01905e244aead9
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20170308/30a949c5/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel