[OpenWrt-Devel] [PATCH 1/1] package sysfsutils: add support for sysfs settings at boot

[Rodolfo Giometti]

This patch is based on sysfsutils package's behaviour on Debian OS.

Signed-off-by: Rodolfo Giometti <giometti at linux.it>
---
 package/libs/sysfsutils/Makefile         | 12 ++++++++
 package/libs/sysfsutils/files/local.conf |  1 +
 package/libs/sysfsutils/files/sysfs.conf | 22 +++++++++++++++
 package/libs/sysfsutils/files/sysfsutils | 48 ++++++++++++++++++++++++++++++++
 4 files changed, 83 insertions(+)
 create mode 100644 package/libs/sysfsutils/files/local.conf
 create mode 100644 package/libs/sysfsutils/files/sysfs.conf
 create mode 100644 package/libs/sysfsutils/files/sysfsutils

diff --git a/package/libs/sysfsutils/Makefile b/package/libs/sysfsutils/Makefile
index 9ee76a0362..6d74d0bbfc 100644
--- a/package/libs/sysfsutils/Makefile
+++ b/package/libs/sysfsutils/Makefile
@@ -65,9 +65,21 @@ define Package/libsysfs/install
 endef
 
 define Package/sysfsutils/install
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/sysfsutils $(1)/etc/init.d/
+
+	$(INSTALL_DATA) ./files/sysfs.conf $(1)/etc/
+	$(INSTALL_DIR) $(1)/etc/sysfs.d
+	$(INSTALL_DATA) ./files/local.conf $(1)/etc/sysfs.d/
+
 	$(INSTALL_DIR) $(1)/usr/bin
 	$(CP) $(PKG_INSTALL_DIR)/usr/bin/systool $(1)/usr/bin/
 endef
 
+define Package/sysfsutils/conffiles
+/etc/sysfs.conf
+/etc/sysfs.d/local.conf
+endef
+
 $(eval $(call BuildPackage,libsysfs))
 $(eval $(call BuildPackage,sysfsutils))
diff --git a/package/libs/sysfsutils/files/local.conf b/package/libs/sysfsutils/files/local.conf
new file mode 100644
index 0000000000..891da73df8
--- /dev/null
+++ b/package/libs/sysfsutils/files/local.conf
@@ -0,0 +1 @@
+# local sysctl settings can be stored in this directory
diff --git a/package/libs/sysfsutils/files/sysfs.conf b/package/libs/sysfsutils/files/sysfs.conf
new file mode 100644
index 0000000000..f03246284f
--- /dev/null
+++ b/package/libs/sysfsutils/files/sysfs.conf
@@ -0,0 +1,22 @@
+#
+# /etc/sysfs.conf - Configuration file for setting sysfs attributes.
+#
+# The sysfs mount directory is automatically prepended to the attribute paths.
+#
+# Syntax:
+# attribute = value
+# mode attribute = 0600 # (any valid argument for chmod)
+# owner attribute = root:wheel # (any valid argument for chown)
+#
+# Examples:
+#
+# Always use the powersave CPU frequency governor
+# devices/system/cpu/cpu0/cpufreq/scaling_governor = powersave
+#
+# Use userspace CPU frequency governor and set initial speed
+# devices/system/cpu/cpu0/cpufreq/scaling_governor = userspace
+# devices/system/cpu/cpu0/cpufreq/scaling_setspeed = 600000
+#
+# Set permissions of suspend control file
+# mode power/state = 0660
+# owner power/state = root:power
diff --git a/package/libs/sysfsutils/files/sysfsutils b/package/libs/sysfsutils/files/sysfsutils
new file mode 100644
index 0000000000..0305ca82a9
--- /dev/null
+++ b/package/libs/sysfsutils/files/sysfsutils
@@ -0,0 +1,48 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2017 Rodolfo Giometti <giometti at enneenne.com>
+#
+# Based on Debian's script /etc/init.d/sysfsutils by
+# Martin Pitt <mpitt at debian.org>
+
+load_conffile() {
+	FILE="$1"
+	sed  's/#.*$//; /^[[:space:]]*$/d;
+	  s/^[[:space:]]*\([^=[:space:]]*\)[[:space:]]*\([^=[:space:]]*\)[[:space:]]*=[[:space:]]*\(.*\)/\1 \2 \3/' \
+	  $FILE | {
+	while read f1 f2 f3; do
+		if [ "$f1" = "mode" -a -n "$f2" -a -n "$f3" ]; then
+			if [ -f "/sys/$f2" ] || [ -d "/sys/$f2" ]; then
+				chmod "$f3" "/sys/$f2"
+			else
+				echo "unknown attribute $f2"
+			fi
+		elif [ "$f1" = "owner" -a -n "$f2" -a -n "$f3" ]; then
+			if [ -f "/sys/$f2" ]; then
+				chown "$f3" "/sys/$f2"
+			else
+				echo "unknown attribute $f2"
+			fi
+		elif [ "$f1" -a -n "$f2" -a -z "$f3" ]; then
+			if [ -f "/sys/$f1" ]; then
+				# Some fields need a terminating newline, others
+				# need the terminating newline to be absent :-(
+				echo -n "$f2" > "/sys/$f1" 2>/dev/null ||
+					echo "$f2" > "/sys/$f1"
+			else
+				echo "unknown attribute $f1"
+			fi
+		else
+			echo "syntax error in $CONFFILE: '$f1' '$f2' '$f3'"
+			exit 1
+		fi
+	done
+	}
+}
+
+START=11
+start() {
+	for file in /etc/sysfs.conf /etc/sysfs.d/*.conf; do
+		[ -r "$file" ] || continue
+		load_conffile "$file"
+	done
+}
-- 
2.11.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel