[OpenWrt-Devel] [PATCH 1/4] PCI: add DT bindings for Cortina Gemini PCI Host Bridge

[Linus Walleij]

This adds device tree bindings for the Cortina Systems Gemini PCI
Host Bridge.

Cc: Janos Laube <janos.dev at gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas at gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll at googlemail.com>
Cc: Florian Fainelli <f.fainelli at gmail.com>
Cc: devicetree at vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
This can be merged to the PCI tree whenever it is considered
fine for inclusion.
---
 .../devicetree/bindings/pci/cortina,gemini-pci.txt | 64 ++++++++++++++++++++++
 1 file changed, 64 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/cortina,gemini-pci.txt

diff --git a/Documentation/devicetree/bindings/pci/cortina,gemini-pci.txt b/Documentation/devicetree/bindings/pci/cortina,gemini-pci.txt
new file mode 100644
index 000000000000..e3090d995e1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cortina,gemini-pci.txt
@@ -0,0 +1,64 @@
+* Cortina Systems Gemini PCI Host Bridge
+
+Mandatory properties:
+
+- compatible: should be "cortina,gemini-pci"
+- reg: memory base and size for the host bridge
+- interrupts: the four PCI interrupts
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- #interrupt-cells: set to <1>
+- bus-range: set to <0x00 0x00> (only root bus)
+- device_type, set to "pci"
+- ranges: see pci.txt
+- interrupt-map-mask: see pci.txt
+- interrupt-map: see pci.txt
+
+Mandatory subnodes:
+- One node reprenting the interrupt-controller inside the host bridge
+  with the following mandatory properties:
+  - interrupt-controller: see interrupt-controller/interrupts.txt
+  - #address-cells: set to <0>
+  - #interrupt-cells: set to <1>
+
+Example:
+
+pci at 50000000 {
+	compatible = "cortina,gemini-pci";
+	reg = <0x50000000 0x100>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, /* PCI A */
+			<26 IRQ_TYPE_LEVEL_HIGH>, /* PCI B */
+			<27 IRQ_TYPE_LEVEL_HIGH>, /* PCI C */
+			<28 IRQ_TYPE_LEVEL_HIGH>; /* PCI D */
+	#address-cells = <3>;
+	#size-cells = <2>;
+	#interrupt-cells = <1>;
+
+	bus-range = <0x00 0x00>; /* Only root bus */
+	ranges = /* 1MiB I/O space 0x50000000-0x500fffff */
+		 <0x01000000 0 0          0x50000000 0 0x00100000>,
+		 /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
+		 <0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
+	interrupt-map-mask = <0xff00 0 0 7>;
+	interrupt-map = <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+			<0x4900 0 0 2 &pci_intc 1>,
+			<0x4a00 0 0 3 &pci_intc 2>,
+			<0x4b00 0 0 4 &pci_intc 3>,
+			<0x5000 0 0 1 &pci_intc 0>, /* Slot 10 */
+			<0x5100 0 0 2 &pci_intc 1>,
+			<0x5200 0 0 3 &pci_intc 2>,
+			<0x5300 0 0 4 &pci_intc 3>,
+			<0x5800 0 0 1 &pci_intc 0>, /* Slot 11 */
+			<0x5900 0 0 2 &pci_intc 1>,
+			<0x5a00 0 0 3 &pci_intc 2>,
+			<0x5b00 0 0 4 &pci_intc 3>,
+			<0x6000 0 0 1 &pci_intc 0>, /* Slot 12 */
+			<0x6100 0 0 2 &pci_intc 1>,
+			<0x6200 0 0 3 &pci_intc 2>,
+			<0x6300 0 0 4 &pci_intc 3>;
+	pci_intc: interrupt-controller {
+		interrupt-controller;
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+	};
+};
-- 
2.9.3
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel