[OpenWrt-Devel] Finished porting of chan_lantiq to asterisk11 and asterisk13

[Stefan Koch]

Note: The LEDE pull request #440 for LEDE is not fully compatible with 
OpenWRT since it enables conflicting SMP by default.
There is a separate OpenWRT pull request #143, too:
https://github.com/openwrt/openwrt/pull/143

To enable VR9 FXS functionality on OpenWRT, disabling SMP it is still 
needed with pull request #143.
But it does not enable VR9 FXS by default, so it is not conflicting 
(that will cause a kernel panic).

Stefan

Am 26.01.2017 um 23:28 schrieb Stefan Koch:
> Hi
>
> I have finished the chan_lantiq porting from asterisk 1.8 to asterisk 
> 11 and asterisk 13.
>
> GIT-Repository:
> https://github.com/kochstefan/asterisk_channel_lantiq.git
>
> See branches:
> asterisk-1_8 (asterisk 1.8 needs glibc)
> asterisk-11 (asterisk 11 needs musl)
> asterisk-13 (asterisk 13 needs musl or glibc)
>
> Master's latest commit is compatible with asterisk 13.
>
> To apply it to the telephony feed, try the patches within the 
> following archive:
> https://drive.google.com/file/d/0B9Z_KppE2R8sdnhIcFV6dEpCbUE
>
> I have successfully tested the chan_lantiq for asterisk 1.8, 11 and 13 
> on a vr9 based box.
>
> To include this into the telephony feed:
> Should I create a pull request from the patches above?
> (Take a copy from chan_lantic.c into telephony feed)
>
> Or should I change it first that the GIT repository is directly linked?
> (Then the sources would automatically considered if changed, without a 
> copy from chan_lantiq.c)
>
> Kernel driver changes are already made for vr9 based boards.
> If the board specific dts file is not already updated it needs the 
> following addition to the command line:
> mem=[TOTALMEMSIZE-2M] vpe1_load_addr=ADDRESS vpe1_mem=2M maxvpes=1 
> maxtcs=1
>
> See:
> https://github.com/lede-project/source/pull/440
>
> XWAY based boards shouldn't need a drivers change.
>
> Best regards
>
> Stefan
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel