[OpenWrt-Devel] python ctypes.util.find_library cannot find libc
Alexandru Ardelean
ardeleanalex at gmail.com
Fri Jan 20 04:31:30 EST 2017
@ 郭涛
I took a look over your patch.
I wonder if that's just specific to ARM architecture.
I don't have an ARM device to test.
On Fri, Jan 20, 2017 at 9:24 AM, Alexandru Ardelean
<ardeleanalex at gmail.com> wrote:
> Hey,
>
> So, just to follow up, real quick.
> There's another proposal here [that started in parallel and earlier than mine]:
> https://patchwork.ozlabs.org/patch/713718/
>
>
> On Thu, Jan 19, 2017 at 9:07 PM, Alexandru Ardelean
> <ardeleanalex at gmail.com> wrote:
>> Cool.
>>
>> Then, a fix I'm proposing to LEDE, and will also spin up a PR for OpenWrt:
>> https://github.com/lede-project/source/pull/722/commits/6e0844540355c89e7f39504db374278d1c6cf05c
>>
>> Feel free to use it.
>> It should apply on top of OpenWrt.
>> Though, be aware ; it's not yet been discussed whether this method is
>> completely sane.
>>
>> I'm hoping some sort of elegant solution will come out of that.
>> In the worst case, you'll need to patch python-iptables [ add a patch
>> in python-iptables' folder ] to use /usr/sbin/modprobe directly.
>>
>> Which may not be a bad idea either.
>> I think it may come down to preferences.
>>
>> In any case, since it's not a issue with Python, I'll just keep an eye
>> on that PR, and update OpenWrt if needed.
>>
>> Thanks
>> Alex
>>
>>
>>
>> On Thu, Jan 19, 2017 at 8:20 PM, Andrew McConachie <andrew at depht.com> wrote:
>>> Hi Alexandru,
>>>
>>> Yes, I'm sorry I didn't respond earlier. Having the correct binary location
>>> in /proc/sys/kernel/modprobe resolves any problems with python-iptables.
>>> It's really just a problem with the kernel not populating that file
>>> correctly.
>>>
>>> Thanks,
>>> Andrew
>>>
>>>
>>> On 1/19/17 11:49, Alexandru Ardelean wrote:
>>>>
>>>> I'm pretty sure the driver was selected.
>>>> I'll try to check a bit more in-depth.
>>>>
>>>> In the meantime, did you try the
>>>>
>>>>
>>>> echo /usr/sbin/modprobe > /proc/sys/kernel/modprobe
>>>>
>>>>
>>>> ?
>>>>
>>>>
>>>> On Thu, Jan 19, 2017 at 4:07 PM, Andrew McConachie <andrew at depht.com>
>>>> wrote:
>>>>>
>>>>> Hi Alexandru,
>>>>>
>>>>> You're missing some kernel hardware driver. I'm not sure if the default
>>>>> compile options include kernel drivers for all HDDs, or for SATA/AHCI.
>>>>> You
>>>>> probably just need to include some extra kernel drivers in make
>>>>> menuconfig.
>>>>>
>>>>> --Andrew
>>>>>
>>>>>
>>>>> On 1/19/17 04:31, Alexandru Ardelean wrote:
>>>>>>
>>>>>> Hey,
>>>>>>
>>>>>> So, I've tried to run an OpenWrt system, x86_64,
>>>>>>
>>>>>>
>>>>>> https://github.com/openwrt/openwrt/commit/4e53a6e9c560b54361f9ed3639e8d12f9ab8939d
>>>>>>
>>>>>> It was hanging on boot.
>>>>>> I've ran in Virtual Machine Manager with QEMU/KVM.
>>>>>> HDD emulation is SATA/AHCI [ I checked it's SATA/AHCI ]
>>>>>>
>>>>>> It looks to me that it's hanging at trying to mount root device
>>>>>> /dev/mtdblock0
>>>>>> Any thoughts ?
>>>>>>
>>>>>> [ 1.213897] ata4: SATA link down (SStatus 0 SControl 300)
>>>>>> [ 1.214781] ata2: SATA link down (SStatus 0 SControl 300)
>>>>>> [ 1.215572] ata6: SATA link down (SStatus 0 SControl 300)
>>>>>> [ 1.216359] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>> [ 1.217229] ata1.00: ATA-7: QEMU HARDDISK, 2.3.1, max UDMA/100
>>>>>> [ 1.217976] ata1.00: 31233 sectors, multi 16: LBA48 NCQ (depth 31/32)
>>>>>> [ 1.218787] ata1.00: applying bridge limits
>>>>>> [ 1.233284] ata1.00: configured for UDMA/100
>>>>>> [ 1.234233] ata5: SATA link down (SStatus 0 SControl 300)
>>>>>> [ 1.235915] ata3: SATA link down (SStatus 0 SControl 300)
>>>>>> [ 1.237371] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK
>>>>>> 1 PQ: 0 ANSI: 5
>>>>>> [ 1.239155] sd 0:0:0:0: [sda] 31233 512-byte logical blocks: (16.0
>>>>>> MB/15.3 MiB)
>>>>>> [ 1.241487] sd 0:0:0:0: [sda] Write Protect is off
>>>>>> [ 1.242882] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>>>>>> enabled, doesn't support DPO or FUA
>>>>>> [ 1.245329] sda: sda1 sda2
>>>>>> [ 1.245887] sda: p2 size 262144 extends beyond EOD, enabling native
>>>>>> capacity
>>>>>> [ 1.247232] sda: sda1 sda2
>>>>>> [ 1.247784] sda: p2 size 262144 extends beyond EOD, truncated
>>>>>> [ 1.248864] sd 0:0:0:0: [sda] Attached SCSI disk
>>>>>> [ 1.256721] block2mtd: erasesize must be a divisor of device size
>>>>>> [ 1.259958] rtc_cmos 00:00: setting system clock to 2017-01-19
>>>>>> 09:27:33 UTC (1484818053)
>>>>>> [ 1.261388] Waiting for root device /dev/mtdblock0...
>>>>>>
>>>>>> On Wed, Jan 18, 2017 at 6:05 PM, Alexandru Ardelean
>>>>>> <ardeleanalex at gmail.com> wrote:
>>>>>>>
>>>>>>> Hey,
>>>>>>>
>>>>>>> So, if you try on the system.
>>>>>>>
>>>>>>> echo /usr/sbin/modprobe > /proc/sys/kernel/modprobe
>>>>>>>
>>>>>>> Does it work ? I mean to just import iptc ?
>>>>>>> It worked for me, but I tried on a LEDE system (x86_64), which I'm
>>>>>>> hoping may be similar to OpenWrt.
>>>>>>>
>>>>>>> For me, the part that interests me the most, is if this is a bug
>>>>>>> within Python [ since I maintain it ], and it runs on both LEDE &
>>>>>>> OpenWrt.
>>>>>>>
>>>>>>> Will try to spin up a OpenWrt [just cloned trunk from Github ].
>>>>>>>
>>>>>>> And I'll try to reproduce.
>>>>>>> For reference ; Python is version 2.7.13
>>>>>>> It's from here: https://github.com/openwrt/packages
>>>>>>>
>>>>>>> I could not find hash 5ba298c in OpenWrt [
>>>>>>> https://github.com/openwrt/openwrt ] nor in packages [ link above ].
>>>>>>>
>>>>>>> Will come back with findings for OpenWrt.
>>>>>>>
>>>>>>> In the meantime, I will see about proposing a solution for updating
>>>>>>> /proc/sys/kernel/modprobe correctly for both LEDE & OpenWrt.
>>>>>>>
>>>>>>> Thanks
>>>>>>> Alex
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Jan 18, 2017 at 4:38 PM, Andrew McConachie <andrew at depht.com>
>>>>>>> wrote:
>>>>>>>>
>>>>>>>> Hi 郭涛 and Alexandru,
>>>>>>>>
>>>>>>>> ldconfig depends on using eglibc to fulfill libc requirement.
>>>>>>>>
>>>>>>>> Symbol: PACKAGE_ldconfig [=n]
>>>>>>>> Type : tristate
>>>>>>>> Prompt: ldconfig............................... Shared library path
>>>>>>>> configuration
>>>>>>>> Location:
>>>>>>>> (3) -> Utilities
>>>>>>>> Defined at tmp/.config-package.in:82365
>>>>>>>> Depends on: !USE_MUSL [=y]
>>>>>>>>
>>>>>>>> If we make python depend on ldconfig, then are we saying python cannot
>>>>>>>> be
>>>>>>>> used with MUSL libc? I don't know what the default libc is for OpenWRT
>>>>>>>> or
>>>>>>>> whether one is considered experimental more than the other. But this
>>>>>>>> is
>>>>>>>> something to consider.
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> Andrew
>>>>>>>>
>>>>>>>>
>>>>>>>> On 1/18/17 03:32, 郭涛 wrote:
>>>>>>>>>
>>>>>>>>> Hi Andrew & Alexandru
>>>>>>>>>
>>>>>>>>> Forget the patch in prev mail, use attached patch instead.
>>>>>>>>>
>>>>>>>>> To use ctypes.util.find_library, you need one of gcc, ldconfig or
>>>>>>>>> objdump. I suggest you use ldconfig
>>>>>>>>>
>>>>>>>>> After install ldconfig, run ldconfig first to update cache
>>>>>>>>> then run ldconfig -p to show all of your libraries
>>>>>>>>> in my case, it shows:
>>>>>>>>>
>>>>>>>>> 195 libs found in cache `/etc/ld.so.cache' (version 1.7.0)
>>>>>>>>> uhttpd_tls.so (libc0) => /usr/lib/uhttpd_tls.so
>>>>>>>>> rclibrary.so (libc0) => /usr/lib/rclibrary.so
>>>>>>>>> libz.so.1 (libc0) => /usr/lib/libz.so.1
>>>>>>>>> libz.so (libc0) => /usr/lib/libz.so
>>>>>>>>> libyaml-0.so.2 (libc0) => /usr/lib/libyaml-0.so.2
>>>>>>>>> ......
>>>>>>>>>
>>>>>>>>> All libraries are libc0, that's why ctypes.util.find_library does not
>>>>>>>>> work on my platform
>>>>>>>>>
>>>>>>>>> You need to run 'uname -m' to get your matchine name and run
>>>>>>>>> 'ldconfig
>>>>>>>>> -p' to get library type.
>>>>>>>>> Atter all, append '$machine' : '$type' to mach_map list in
>>>>>>>>> ctypes/util.py and try find_library('pthread')
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>>> from ctypes.util import find_library
>>>>>>>>>>>>
>>>>>>>>>>>> find_library('pthread')
>>>>>>>>>
>>>>>>>>> 'libpthread.so.0'
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> 2017-01-17 22:22 GMT+08:00 Alexandru Ardelean
>>>>>>>>> <ardeleanalex at gmail.com>:
>>>>>>>>>>
>>>>>>>>>> Will give it a try.
>>>>>>>>>>
>>>>>>>>>> On Mon, Jan 16, 2017 at 9:41 PM, Andrew McConachie
>>>>>>>>>> <andrew at depht.com>
>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>> Hi Alexandru and 郭涛,
>>>>>>>>>>>
>>>>>>>>>>> Attached is the Makefile I made for python-iptables. I can work
>>>>>>>>>>> around
>>>>>>>>>>> this
>>>>>>>>>>> by hardwiring library locations in the source of python-iptables,
>>>>>>>>>>> but
>>>>>>>>>>> I'd
>>>>>>>>>>> rather do it the correct way. To reproduce this build an OpenWrt
>>>>>>>>>>> system
>>>>>>>>>>> with
>>>>>>>>>>> this Makefile and then just create a simple Python script with
>>>>>>>>>>> 'import
>>>>>>>>>>> iptc'.
>>>>>>>>>>>
>>>>>>>>>>> I am cloning OpenWrt from Github and running make menuconfig;make
>>>>>>>>>>> to
>>>>>>>>>>> build
>>>>>>>>>>> everything. My Github version is about 6 days old with the last
>>>>>>>>>>> commit
>>>>>>>>>>> at
>>>>>>>>>>> 5ba298c.
>>>>>>>>>>>
>>>>>>>>>>> I also found that /proc/sys/kernel/modprobe contains
>>>>>>>>>>> /sbin/modprobe,
>>>>>>>>>>> while
>>>>>>>>>>> the modprobe binary is at /usr/sbin/modprobe. According to the
>>>>>>>>>>> Debian
>>>>>>>>>>> man
>>>>>>>>>>> page on proc(5), /proc/sys/kernel/modprobe should point to the
>>>>>>>>>>> modprobe
>>>>>>>>>>> binary. Googling about seems also to suggest that this file should
>>>>>>>>>>> contain
>>>>>>>>>>> the location of the modprobe binary. So I would say this is also a
>>>>>>>>>>> bug.
>>>>>>>>>>>
>>>>>>>>>>> Thanks!
>>>>>>>>>>> --Andrew
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 1/16/17 07:23, Alexandru Ardelean wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> Hey Andrew & 郭涛
>>>>>>>>>>>>
>>>>>>>>>>>> Sorry I did not answer sooner.
>>>>>>>>>>>>
>>>>>>>>>>>> @Andrew: do you have a Makefile for the python-iptables packages ?
>>>>>>>>>>>> I'd like to try to build it and see the issue. Or, are you just
>>>>>>>>>>>> using
>>>>>>>>>>>> that .py file ?
>>>>>>>>>>>> Can you give a bit more input on which Python version you're
>>>>>>>>>>>> using,
>>>>>>>>>>>> and which OpenWrt version?
>>>>>>>>>>>>
>>>>>>>>>>>> If the issue is still present in the current packages trunk, I'd
>>>>>>>>>>>> like
>>>>>>>>>>>> to
>>>>>>>>>>>> fix it.
>>>>>>>>>>>> And if 郭涛's fix works, we can apply it to trunk.
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks
>>>>>>>>>>>> Alex
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Mon, Jan 16, 2017 at 6:23 AM, 郭涛 <guotao945 at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> I also meet this issue.
>>>>>>>>>>>>> I fixed it using below change
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> https://github.com/gt945/Netgear-D7800-Openwrt-Packages/commit/fab71ca0ebf36d5f7b495b96f14d459e794b7224
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> 2017-01-13 0:43 GMT+08:00 Andrew McConachie <andrew at depht.com>:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi OpenWRT Devs,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I'm building an OpenWRT package for python-iptables for a
>>>>>>>>>>>>>> project
>>>>>>>>>>>>>> I'm
>>>>>>>>>>>>>> working on and getting this error message when attempting to use
>>>>>>>>>>>>>> it.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> import iptc
>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packages/iptc/__init__.py",
>>>>>>>>>>>>>> line
>>>>>>>>>>>>>> 10, in
>>>>>>>>>>>>>> <module>
>>>>>>>>>>>>>> from ip4tc import (is_table_available, Table, Chain,
>>>>>>>>>>>>>> Rule,
>>>>>>>>>>>>>> Match,
>>>>>>>>>>>>>> Target,
>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packages/iptc/ip4tc.py",
>>>>>>>>>>>>>> line
>>>>>>>>>>>>>> 13,
>>>>>>>>>>>>>> in
>>>>>>>>>>>>>> <module>
>>>>>>>>>>>>>> from xtables import (XT_INV_PROTO, NFPROTO_IPV4,
>>>>>>>>>>>>>> XTablesError,
>>>>>>>>>>>>>> xtables,
>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packages/iptc/xtables.py",
>>>>>>>>>>>>>> line
>>>>>>>>>>>>>> 677, in
>>>>>>>>>>>>>> <module>
>>>>>>>>>>>>>> _optind = ct.c_long.in_dll(_libc, "optind")
>>>>>>>>>>>>>> AttributeError: 'NoneType' object has no attribute '_handle'
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> You can view xtables.py here if you're curious.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> https://github.com/ldx/python-iptables/blob/master/iptc/xtables.py
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The problem is that my python-iptables package cannot find libc
>>>>>>>>>>>>>> functions
>>>>>>>>>>>>>> using ctypes.util.find_library(). I've tried building OpenWRT
>>>>>>>>>>>>>> using
>>>>>>>>>>>>>> both
>>>>>>>>>>>>>> musl and eglibc but neither work. I've also tried building
>>>>>>>>>>>>>> OpenWRT
>>>>>>>>>>>>>> with
>>>>>>>>>>>>>> objdump and ldconfig. When I include ldconfig via 'make
>>>>>>>>>>>>>> menuconfig'
>>>>>>>>>>>>>> it
>>>>>>>>>>>>>> doesn't actually populate my OpenWRT image with an ldconfig
>>>>>>>>>>>>>> binary.
>>>>>>>>>>>>>> Maybe
>>>>>>>>>>>>>> this is the problem?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> This bug report looks similar to my problem, but it's about MIPS
>>>>>>>>>>>>>> and
>>>>>>>>>>>>>> marked
>>>>>>>>>>>>>> as closed.
>>>>>>>>>>>>>> https://dev.openwrt.org/ticket/20123
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Any help or pointers would be much appreciated.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>> Andrew
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> openwrt-devel mailing list
>>>>>>>>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>>>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> openwrt-devel mailing list
>>>>>>>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>>>>>
>>>>>>>>>>>
>>>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list